diff --git a/.gitignore b/.gitignore index a7e7b05..f27ac56 100644 --- a/.gitignore +++ b/.gitignore @@ -11,10 +11,10 @@ ext/ /lacpu/rtl/xilinx_ip/axi_crossbar_1x2/* /lacpu/rtl/xilinx_ip/axi_ram/* /lacpu/rtl/xilinx_ip/clk_pll/* -/lacpu/rtl/xilinx_ip/data_bram_bank/* +/lacpu/rtl/xilinx_ip/data_sram_bank/* !/lacpu/rtl/xilinx_ip/axi_crossbar_1x2/axi_crossbar_1x2.xci !/lacpu/rtl/xilinx_ip/axi_ram/axi_ram.xci !/lacpu/rtl/xilinx_ip/clk_pll/clk_pll.xci -!/lacpu/rtl/xilinx_ip/data_bram_bank/data_bram_bank.xci +!/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank.xci diff --git a/lacpu/doc/design-初赛.docx b/lacpu/doc/design-初赛.docx new file mode 100644 index 0000000..1bcc33a Binary files /dev/null and b/lacpu/doc/design-初赛.docx differ diff --git a/lacpu/doc/mycpu性能计算.xlsx b/lacpu/doc/mycpu性能计算.xlsx index 017b730..826cdce 100644 Binary files a/lacpu/doc/mycpu性能计算.xlsx and b/lacpu/doc/mycpu性能计算.xlsx differ diff --git a/lacpu/doc/流水线设计.vsdx b/lacpu/doc/流水线设计.vsdx new file mode 100644 index 0000000..0f93f9c Binary files /dev/null and b/lacpu/doc/流水线设计.vsdx differ diff --git a/lacpu/rtl/mycpu/cache_data.v b/lacpu/rtl/mycpu/cache_data.v index 6be333d..7f5f345 100644 --- a/lacpu/rtl/mycpu/cache_data.v +++ b/lacpu/rtl/mycpu/cache_data.v @@ -65,7 +65,7 @@ module cache_data_v5 data_bram_bank bank0_way0( .clka (clk ), .ena (cached&refresh|sram_en&bank_sel[0]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 + .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 .addra (index ), // 7 .dina (refresh?cacheline_new[31:0]:sram_wdata ), // 32 .douta (rdata_way0[0] ) // 32 @@ -73,7 +73,7 @@ module cache_data_v5 data_bram_bank bank1_way0( .clka (clk ), .ena (cached&refresh|sram_en&bank_sel[1]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 + .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 .addra (index ), // 7 .dina (refresh?cacheline_new[63:32]:sram_wdata ), // 32 .douta (rdata_way0[1] ) // 32 @@ -81,7 +81,7 @@ module cache_data_v5 data_bram_bank bank2_way0( .clka (clk ), .ena (cached&refresh|sram_en&bank_sel[2]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 + .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 .addra (index ), // 7 .dina (refresh?cacheline_new[95:64]:sram_wdata ), // 32 .douta (rdata_way0[2] ) // 32 @@ -89,7 +89,7 @@ module cache_data_v5 data_bram_bank bank3_way0( .clka (clk ), .ena (cached&refresh|sram_en&bank_sel[3]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 + .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 .addra (index ), // 7 .dina (refresh?cacheline_new[127:96]:sram_wdata ), // 32 .douta (rdata_way0[3] ) // 32 @@ -97,7 +97,7 @@ module cache_data_v5 data_bram_bank bank4_way0( .clka (clk ), .ena (cached&refresh|sram_en&bank_sel[4]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 + .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 .addra (index ), // 7 .dina (refresh?cacheline_new[159:128]:sram_wdata ), // 32 .douta (rdata_way0[4] ) // 32 @@ -105,7 +105,7 @@ module cache_data_v5 data_bram_bank bank5_way0( .clka (clk ), .ena (cached&refresh|sram_en&bank_sel[5]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 + .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 .addra (index ), // 7 .dina (refresh?cacheline_new[191:160]:sram_wdata ), // 32 .douta (rdata_way0[5] ) // 32 @@ -113,7 +113,7 @@ module cache_data_v5 data_bram_bank bank6_way0( .clka (clk ), .ena (cached&refresh|sram_en&bank_sel[6]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 + .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 .addra (index ), // 7 .dina (refresh?cacheline_new[223:192]:sram_wdata ), // 32 .douta (rdata_way0[6] ) // 32 @@ -121,7 +121,7 @@ module cache_data_v5 data_bram_bank bank7_way0( .clka (clk ), .ena (cached&refresh|sram_en&bank_sel[7]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 + .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 .addra (index ), // 7 .dina (refresh?cacheline_new[255:224]:sram_wdata ), // 32 .douta (rdata_way0[7] ) // 32 @@ -399,394 +399,4 @@ module cache_data_v5 }; assign cacheline_old = lru_r ? cacheline_old_way1 : cacheline_old_way0; -endmodule - -module cache_data_v6 -#( - parameter CACHELINE_WD = 512, - parameter TAG_WD = 21, - parameter HIT_WD = 2 -) -( - input clk, - input reset, - - input write_back, - input [ 1:0] hit, - input lru, - input cached, - - // sram_port - input sram_en, - input [ 3:0] sram_we, - input [31:0] sram_addr, - input [31:0] sram_wdata, - output [63:0] sram_rdata, - - // axi - input refresh, - input [CACHELINE_WD -1:0] cacheline_new, - output [CACHELINE_WD -1:0] cacheline_old -); - wire [31 :0] rdata_way0 [15:0]; - wire [31 :0] rdata_way1 [15:0]; - wire [TAG_WD -2:0] tag; - wire [5 :0] index; - wire [5 :0] offset; - reg [HIT_WD- 1:0] hit_r; - reg lru_r; - reg cached_r; - - assign {tag, - index, - offset - } = sram_addr; - - wire [15:0] bank_sel; - reg [15:0] bank_sel_r; - - decoder_4_16 u_decoder_4_16( - .in (offset[5:2] ), - .out (bank_sel ) - ); - - always @ (posedge clk) begin - if (reset) begin - hit_r <= 2'b0; - lru_r <= 1'b0; - cached_r <= 1'b1; - bank_sel_r <= 16'b0; - end - else begin - hit_r <= hit; - lru_r <= lru; - cached_r <= cached; - bank_sel_r <= bank_sel; - end - end - -// data_bram_way0 begin - data_bram_bank bank0_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[0]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[31:0]:sram_wdata ), // 32 - .douta (rdata_way0[0] ) // 32 - ); - data_bram_bank bank1_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[0]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[63:32]:sram_wdata ), // 32 - .douta (rdata_way0[1] ) // 32 - ); - data_bram_bank bank2_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[2]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[95:64]:sram_wdata ), // 32 - .douta (rdata_way0[2] ) // 32 - ); - data_bram_bank bank3_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[2]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[127:96]:sram_wdata ), // 32 - .douta (rdata_way0[3] ) // 32 - ); - data_bram_bank bank4_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[4]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[159:128]:sram_wdata ), // 32 - .douta (rdata_way0[4] ) // 32 - ); - data_bram_bank bank5_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[4]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[191:160]:sram_wdata ), // 32 - .douta (rdata_way0[5] ) // 32 - ); - data_bram_bank bank6_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[6]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[223:192]:sram_wdata ), // 32 - .douta (rdata_way0[6] ) // 32 - ); - data_bram_bank bank7_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[6]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[255:224]:sram_wdata ), // 32 - .douta (rdata_way0[7] ) // 32 - ); - data_bram_bank bank8_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[8]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[287:256]:sram_wdata ), // 32 - .douta (rdata_way0[8] ) // 32 - ); - data_bram_bank bank9_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[8]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[319:288]:sram_wdata ), // 32 - .douta (rdata_way0[9] ) // 32 - ); - data_bram_bank bank10_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[10]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[351:320]:sram_wdata ), // 32 - .douta (rdata_way0[10] ) // 32 - ); - data_bram_bank bank11_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[10]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[383:352]:sram_wdata ), // 32 - .douta (rdata_way0[11] ) // 32 - ); - data_bram_bank bank12_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[12]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[415:384]:sram_wdata ), // 32 - .douta (rdata_way0[12] ) // 32 - ); - data_bram_bank bank13_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[12]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[447:416]:sram_wdata ), // 32 - .douta (rdata_way0[13] ) // 32 - ); - data_bram_bank bank14_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[14]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[479:448]:sram_wdata ), // 32 - .douta (rdata_way0[14] ) // 32 - ); - data_bram_bank bank15_way0( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[14]&hit[0]|write_back ), // 1 - .wea (refresh?lru?4'b0000:4'b1111:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[511:480]:sram_wdata ), // 32 - .douta (rdata_way0[15] ) // 32 - ); -// data_bram_way0 end - -// data_bram_way1 begin - data_bram_bank bank0_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[0]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[31:0]:sram_wdata ), // 32 - .douta (rdata_way1[0] ) // 32 - ); - data_bram_bank bank1_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[0]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[63:32]:sram_wdata ), // 32 - .douta (rdata_way1[1] ) // 32 - ); - data_bram_bank bank2_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[2]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[95:64]:sram_wdata ), // 32 - .douta (rdata_way1[2] ) // 32 - ); - data_bram_bank bank3_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[2]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[127:96]:sram_wdata ), // 32 - .douta (rdata_way1[3] ) // 32 - ); - data_bram_bank bank4_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[4]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[159:128]:sram_wdata ), // 32 - .douta (rdata_way1[4] ) // 32 - ); - data_bram_bank bank5_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[4]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[191:160]:sram_wdata ), // 32 - .douta (rdata_way1[5] ) // 32 - ); - data_bram_bank bank6_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[6]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[223:192]:sram_wdata ), // 32 - .douta (rdata_way1[6] ) // 32 - ); - data_bram_bank bank7_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[6]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[255:224]:sram_wdata ), // 32 - .douta (rdata_way1[7] ) // 32 - ); - data_bram_bank bank8_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[8]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[287:256]:sram_wdata ), // 32 - .douta (rdata_way1[8] ) // 32 - ); - data_bram_bank bank9_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[8]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[319:288]:sram_wdata ), // 32 - .douta (rdata_way1[9] ) // 32 - ); - data_bram_bank bank10_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[10]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[351:320]:sram_wdata ), // 32 - .douta (rdata_way1[10] ) // 32 - ); - data_bram_bank bank11_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[10]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[383:352]:sram_wdata ), // 32 - .douta (rdata_way1[11] ) // 32 - ); - data_bram_bank bank12_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[12]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[415:384]:sram_wdata ), // 32 - .douta (rdata_way1[12] ) // 32 - ); - data_bram_bank bank13_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[12]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[447:416]:sram_wdata ), // 32 - .douta (rdata_way1[13] ) // 32 - ); - data_bram_bank bank14_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[14]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[479:448]:sram_wdata ), // 32 - .douta (rdata_way1[14] ) // 32 - ); - data_bram_bank bank15_way1( - .clka (clk ), - .ena (cached&refresh|sram_en&bank_sel[14]&hit[1]|write_back ), // 1 - .wea (refresh?lru?4'b1111:4'b0000:write_back?4'b0000:sram_we), // 4 - .addra (index ), // 7 - .dina (refresh?cacheline_new[511:480]:sram_wdata ), // 32 - .douta (rdata_way1[15] ) // 32 - ); -// data_bram_way1 end - - wire [63:0] sram_rdata_way0,sram_rdata_way1; - - assign sram_rdata_way0 = ~cached_r ? 64'b0 : - bank_sel_r[ 0] ? {rdata_way0[ 1],rdata_way0[ 0]} : - bank_sel_r[ 2] ? {rdata_way0[ 3],rdata_way0[ 2]} : - bank_sel_r[ 4] ? {rdata_way0[ 5],rdata_way0[ 4]} : - bank_sel_r[ 6] ? {rdata_way0[ 7],rdata_way0[ 6]} : - bank_sel_r[ 8] ? {rdata_way0[ 9],rdata_way0[ 8]} : - bank_sel_r[10] ? {rdata_way0[11],rdata_way0[10]} : - bank_sel_r[12] ? {rdata_way0[13],rdata_way0[12]} : - bank_sel_r[14] ? {rdata_way0[15],rdata_way0[14]} : 64'b0; - - assign sram_rdata_way1 = ~cached_r ? 64'b0 : - bank_sel_r[ 0] ? {rdata_way1[ 1],rdata_way1[ 0]} : - bank_sel_r[ 2] ? {rdata_way1[ 3],rdata_way1[ 2]} : - bank_sel_r[ 4] ? {rdata_way1[ 5],rdata_way1[ 4]} : - bank_sel_r[ 6] ? {rdata_way1[ 7],rdata_way1[ 6]} : - bank_sel_r[ 8] ? {rdata_way1[ 9],rdata_way1[ 8]} : - bank_sel_r[10] ? {rdata_way1[11],rdata_way1[10]} : - bank_sel_r[12] ? {rdata_way1[13],rdata_way1[12]} : - bank_sel_r[14] ? {rdata_way1[15],rdata_way1[14]} : 64'b0; - assign sram_rdata = hit_r[0] ? sram_rdata_way0 : - hit_r[1] ? sram_rdata_way1 : 64'b0; - - wire [CACHELINE_WD -1:0] cacheline_old_way0, cacheline_old_way1; - assign cacheline_old_way0 = { - rdata_way0[15], - rdata_way0[14], - rdata_way0[13], - rdata_way0[12], - rdata_way0[11], - rdata_way0[10], - rdata_way0[ 9], - rdata_way0[ 8], - rdata_way0[ 7], - rdata_way0[ 6], - rdata_way0[ 5], - rdata_way0[ 4], - rdata_way0[ 3], - rdata_way0[ 2], - rdata_way0[ 1], - rdata_way0[ 0] - }; - assign cacheline_old_way1 = { - rdata_way1[15], - rdata_way1[14], - rdata_way1[13], - rdata_way1[12], - rdata_way1[11], - rdata_way1[10], - rdata_way1[ 9], - rdata_way1[ 8], - rdata_way1[ 7], - rdata_way1[ 6], - rdata_way1[ 5], - rdata_way1[ 4], - rdata_way1[ 3], - rdata_way1[ 2], - rdata_way1[ 1], - rdata_way1[ 0] - }; - assign cacheline_old = lru_r ? cacheline_old_way1 : cacheline_old_way0; endmodule \ No newline at end of file diff --git a/lacpu/rtl/mycpu/csr.v b/lacpu/rtl/mycpu/csr.v index bf03e0b..158e819 100644 --- a/lacpu/rtl/mycpu/csr.v +++ b/lacpu/rtl/mycpu/csr.v @@ -63,9 +63,6 @@ module csr( reg timer_en; reg [63:0] timer_64; - // reg has_int_r; - // reg [ 1:0] plv_r; - wire inst_sc_w; wire inst_csrrd; wire inst_csrwr; @@ -92,21 +89,6 @@ module csr( wire va_error; wire [31:0] bad_va; - // always @(posedge clk) begin - // if(reset) begin - // has_int_r <= 0; - // plv_r <= 0; - // end - // else begin - // has_int_r <= ((ecfg[`LIE] & estat[`IS]) != 13'b0) & crmd[`IE]; - // plv_r <= except_en & !inst_ertn ? 2'b0 : - // inst_ertn ? prmd[`PPLV] : - // csr_we && (csr_addr == `CRMD_ADDR) ? csr_wdata[`PLV] : - // crmd[`PLV]; - // end - // end - - // out TODO! assign has_int_out = ((ecfg[`LIE] & estat[`IS]) != 13'b0) & crmd[`IE]; assign plv_out = except_en & !inst_ertn ? 2'b0 : inst_ertn ? prmd[`PPLV] : diff --git a/lacpu/rtl/mycpu/dcache.v b/lacpu/rtl/mycpu/dcache.v index 00b7a4f..1c522ec 100644 --- a/lacpu/rtl/mycpu/dcache.v +++ b/lacpu/rtl/mycpu/dcache.v @@ -33,10 +33,10 @@ module dcache .reset (reset ), .flush (1'b0 ), .stallreq (stallreq_dcache ), - .cached (~dcache_uncached ), // ? TODO from tlb - .sram_en (data_sram_en/* & ~d_refill & ~d_invalid & ~d_modify*/), // TODO! + .cached (~dcache_uncached ), + .sram_en (data_sram_en ), .sram_we (data_sram_we ), - .sram_addr (data_sram_addr ), // _mmu ? + .sram_addr (data_sram_addr ), .refresh (dcache_refresh ), .miss (dcache_miss ), .axi_raddr (dcache_raddr ), @@ -52,10 +52,10 @@ module dcache .write_back (dcache_write_back ), .hit (dcache_hit ), .lru (dcache_lru ), - .cached (~dcache_uncached ), // ? from tlb - .sram_en (data_sram_en/* & ~d_refill & ~d_invalid & ~d_modify*/), // TODO! + .cached (~dcache_uncached ), + .sram_en (data_sram_en ), .sram_we (data_sram_we ), - .sram_addr (data_sram_addr ), // _mmu ? + .sram_addr (data_sram_addr ), .sram_wdata (data_sram_wdata ), .sram_rdata (data_sram_rdata ), .refresh (dcache_refresh ), diff --git a/lacpu/rtl/mycpu/dt.v b/lacpu/rtl/mycpu/dt_stage.v similarity index 98% rename from lacpu/rtl/mycpu/dt.v rename to lacpu/rtl/mycpu/dt_stage.v index 07d97ea..dd52797 100644 --- a/lacpu/rtl/mycpu/dt.v +++ b/lacpu/rtl/mycpu/dt_stage.v @@ -1,4 +1,4 @@ -module dt +module dt_stage #( parameter ES_TO_DT_BUS_WD = 340, parameter DT_TO_MS_BUS_WD = 271, diff --git a/lacpu/rtl/mycpu/exe_stage.v b/lacpu/rtl/mycpu/exe_stage.v index 3f94cea..db25614 100644 --- a/lacpu/rtl/mycpu/exe_stage.v +++ b/lacpu/rtl/mycpu/exe_stage.v @@ -13,7 +13,6 @@ module exe_stage input [ 5:0] stall, output stallreq_es, - //output stallreq_es_for_cache, input [DS_TO_ES_BUS_WD -1:0] ds_to_es_bus, output [ES_TO_DT_BUS_WD -1:0] es_to_dts_bus, @@ -22,18 +21,9 @@ module exe_stage input src2_is_forward, input [31:0] src1_forward_result, input [31:0] src2_forward_result, - //input [MS_TO_ES_BUS_WD -1:0] dts_to_es_bus, - //input [MS_TO_ES_BUS_WD -1:0] ms1_to_es_bus, - //input [MS_TO_ES_BUS_WD -1:0] ms2_to_es_bus, - //input [WS_TO_ES_BUS_WD -1:0] ws_to_es_bus, output [BR_BUS_WD -1:0] br_bus, input br_taken_buffer - - // output data_sram_en, - // output [ 3:0] data_sram_we, - // output [31:0] data_sram_addr, - // output [31:0] data_sram_wdata ); reg [DS_TO_ES_BUS_WD -1:0] ds_to_es_bus_r; @@ -130,26 +120,6 @@ module exe_stage inst //31 :0 } = ds_to_es_bus_r; - // assign {dts_reg_we, - // dts_dest, - // dts_result - // } = dts_to_es_bus; - - // assign {ms1_reg_we, - // ms1_dest, - // ms1_result - // } = ms1_to_es_bus; - - // assign {ms2_reg_we, - // ms2_dest, - // ms2_result - // } = ms2_to_es_bus; - - // assign {ws_reg_we, - // ws_dest, - // ws_result - // } = ws_to_es_bus; - assign es_to_dts_bus = {data_sram_en ,//339:339 data_sram_we ,//338:335 data_sram_addr ,//334:303 @@ -191,18 +161,10 @@ module exe_stage end end - assign src1 = //dts_reg_we & (dts_dest == rj ) & (rj != 1'b0) ? dts_result : // TODO! - //ms1_reg_we & (ms1_dest == rj ) & (rj != 1'b0) ? ms1_result : // TODO! - //ms2_reg_we & (ms2_dest == rj ) & (rj != 1'b0) ? ms2_result : - //ws_reg_we & (ws_dest == rj ) & (rj != 1'b0) ? ws_result : - src1_is_forward ? src1_forward_result : - rj_value; - assign src2 = //dts_reg_we & (dts_dest == rkd) & (rkd != 1'b0) ? dts_result : // TODO! - //ms1_reg_we & (ms1_dest == rkd) & (rkd != 1'b0) ? ms1_result : // TODO! - //ms2_reg_we & (ms2_dest == rkd) & (rkd != 1'b0) ? ms2_result : - //ws_reg_we & (ws_dest == rkd) & (rkd != 1'b0) ? ws_result : - src2_is_forward ? src2_forward_result : - rkd_value; + assign src1 = src1_is_forward ? src1_forward_result : + rj_value; + assign src2 = src2_is_forward ? src2_forward_result : + rkd_value; assign alu_src1 = src1_is_pc ? es_pc : src1; diff --git a/lacpu/rtl/mycpu/icache.v b/lacpu/rtl/mycpu/icache.v index 646d1ad..a22f229 100644 --- a/lacpu/rtl/mycpu/icache.v +++ b/lacpu/rtl/mycpu/icache.v @@ -31,9 +31,9 @@ module icache .flush (1'b0 ), .stallreq (stallreq_icache ), .cached (1'b1 ), - .sram_en (inst_sram_en/* & ~i_refill & ~i_invalid*/ ), // TODO! + .sram_en (inst_sram_en ), .sram_we (inst_sram_we ), - .sram_addr (inst_sram_addr ), // _mmu ? + .sram_addr (inst_sram_addr ), .refresh (icache_refresh ), .miss (icache_miss ), .axi_raddr (icache_raddr ), @@ -50,7 +50,7 @@ module icache .hit (icache_hit ), .lru (icache_lru ), .cached (1'b1 ), - .sram_en (inst_sram_en/* & ~i_refill & ~i_invalid*/ ), // TODO! + .sram_en (inst_sram_en ), .sram_we (inst_sram_we ), .sram_addr (inst_sram_addr ), .sram_wdata (inst_sram_wdata ), diff --git a/lacpu/rtl/mycpu/id_stage.v b/lacpu/rtl/mycpu/id_stage.v index 587c054..96b59b6 100644 --- a/lacpu/rtl/mycpu/id_stage.v +++ b/lacpu/rtl/mycpu/id_stage.v @@ -30,9 +30,6 @@ module id_stage reg [31:0] inst_sram_rdata_r; reg stall_flag; - reg [ 6:0] es_load_buffer; - reg es_csr_buffer; - wire br_flush; wire [31:0] ds_pc; @@ -75,13 +72,6 @@ module id_stage wire [31:0] rj_value; wire [31:0] rkd_value; - wire [ 4:0] es_dest; - wire es_is_load; - wire es_is_csr; - wire es_reg_we; - wire stallreq_load; - wire stallreq_csr; - wire excp_adef; wire [31:0] csr_vec_l; wire [63:0] csr_vec; @@ -219,37 +209,4 @@ module id_stage assign rj_value = rf_rdata1; assign rkd_value = rf_rdata2; - always @ (posedge clk) begin - if (reset) begin - es_load_buffer <= 7'b0; - es_csr_buffer <= 1'b0; - end - else if (flush) begin - es_load_buffer <= 7'b0; - es_csr_buffer <= 1'b0; - end - else if (stall[2]&(!stall[3])) begin - es_load_buffer <= 7'b0; - es_csr_buffer <= 1'b0; - end - else if (!stall[2]) begin - es_load_buffer <= {|load_op, reg_we, dest}; - es_csr_buffer <= |csr_op; - end - end - - assign {es_is_load, - es_reg_we, - es_dest - } = es_load_buffer; - assign es_is_csr = es_csr_buffer; - //ex段为load指令，且发生数据相关时，id段需要被暂停 - assign stallreq_load = es_is_load & es_reg_we & ((es_dest==rj & rj!=0)|(es_dest==rkd & rkd!=0)); //TODO? - assign stallreq_csr = es_is_csr & es_reg_we & ((es_dest==rj & rj!=0)|(es_dest==rkd & rkd!=0)); - - wire stallreq_forward; - assign stallreq_forward = es_reg_we & ((es_dest==rj & rj!=0)|(es_dest==rkd & rkd!=0)); // TODO! - - assign stallreq_ds = stallreq_load | stallreq_csr/* | stallreq_forward*/; - endmodule \ No newline at end of file diff --git a/lacpu/rtl/mycpu/inst_decoder.v b/lacpu/rtl/mycpu/inst_decoder.v index 6546aa8..962a3d9 100644 --- a/lacpu/rtl/mycpu/inst_decoder.v +++ b/lacpu/rtl/mycpu/inst_decoder.v @@ -34,8 +34,6 @@ module inst_decoder( output csr_wdata_sel, output [31:0] csr_vec_l, - //output [ 3:0] sel_rf_res, - output reg_we ); wire dest_is_r1; @@ -536,10 +534,4 @@ module inst_decoder( //inst_idle ; assign excp_ipe = kernel_inst && (csr_plv == 2'b11); - - // rf_res from - // assign sel_rf_res[0] = inst_jirl | inst_bl; - // assign sel_rf_res[1] = |load_op; - // assign sel_rf_res[2] = |csr_op; - // assign sel_rf_res[3] = |mul_div_op; endmodule diff --git a/lacpu/rtl/mycpu/mem_stage.v b/lacpu/rtl/mycpu/mem_stage.v index bbbe7d1..523e0a8 100644 --- a/lacpu/rtl/mycpu/mem_stage.v +++ b/lacpu/rtl/mycpu/mem_stage.v @@ -214,7 +214,7 @@ module mem2_stage (inst_ld_hu & byte_sel[0]) ? { 16'b0, data_temp[15: 0]} : (inst_ld_hu & byte_sel[2]) ? { 16'b0, data_temp[31:16]} : (inst_ld_w & byte_sel[0]) ? data_temp : - 32'b0; // inst_ll ? + 32'b0; assign {csr_we, csr_wdata_sel, diff --git a/lacpu/rtl/mycpu/mul.v b/lacpu/rtl/mycpu/mul.v index 71707b9..44a30b5 100644 --- a/lacpu/rtl/mycpu/mul.v +++ b/lacpu/rtl/mycpu/mul.v @@ -16,6 +16,7 @@ module mul( wire carry; wire [63:0] mul_result; + reg [63:0] mul_result_r; always @ (posedge clk) begin if (reset) begin @@ -25,7 +26,7 @@ module mul( cnt <= cnt - 1; end else if (in_valid) begin - cnt <= 1;//32; + cnt <= 2;//32; end end @@ -35,15 +36,18 @@ module mul( if (reset) begin result_h <= 0; result_l <= 0; + mul_result_r <= 0; end else if (cnt != 0) begin //{result_h, result_l} <= {carry, add_result, result_l[31:1]}; - result_h <= mul_result[63:32]; - result_l <= mul_result[31: 0]; + result_h <= mul_result_r[63:32]; + result_l <= mul_result_r[31: 0]; + mul_result_r <= mul_result; end else if (in_valid) begin result_h <= 0; result_l <= 0;//b; + mul_result_r <= 0; end end diff --git a/lacpu/rtl/mycpu/mul_div_top.v b/lacpu/rtl/mycpu/mul_div_top.v index 68f36e2..b989e6a 100644 --- a/lacpu/rtl/mycpu/mul_div_top.v +++ b/lacpu/rtl/mycpu/mul_div_top.v @@ -32,16 +32,6 @@ module mul_div_top( wire sign_flag_locked; wire rem_flag_locked; - - //------------------------- - - wire [63:0] unsigned_prod; - wire [63:0] signed_prod; - - assign unsigned_prod = a * b; - //assign signed_prod = $signed(a) * $signed(b); - - //------------------------- assign mul_en = mul_div_op[0] | mul_div_op[1]; assign div_en = mul_div_op[2] | mul_div_op[3]; diff --git a/lacpu/rtl/mycpu/mycpu_core.v b/lacpu/rtl/mycpu/mycpu_core.v index faebbc4..8983046 100644 --- a/lacpu/rtl/mycpu/mycpu_core.v +++ b/lacpu/rtl/mycpu/mycpu_core.v @@ -173,7 +173,7 @@ module mycpu_core .br_taken_buffer (br_taken_buffer ) ); - dt dt( + dt_stage dt_stage( .clk (clk ), .reset (reset ), .flush (flush ), diff --git a/lacpu/rtl/mycpu/mycpu_top.v b/lacpu/rtl/mycpu/mycpu_top.v index f83ad05..352509b 100644 --- a/lacpu/rtl/mycpu/mycpu_top.v +++ b/lacpu/rtl/mycpu/mycpu_top.v @@ -52,18 +52,6 @@ module mycpu_top input bvalid, output bready, - // // inst sram interface - // output inst_sram_en, - // output [ 3:0] inst_sram_we, - // output [31:0] inst_sram_addr, - // output [31:0] inst_sram_wdata, - // input [31:0] inst_sram_rdata, - // // data sram interface - // output data_sram_en, - // output [ 3:0] data_sram_we, - // output [31:0] data_sram_addr, - // output [31:0] data_sram_wdata, - // input [31:0] data_sram_rdata, // trace debug interface output [31:0] debug_wb_pc, output [ 3:0] debug_wb_rf_we, @@ -223,25 +211,12 @@ module mycpu_top end assign data_sram_rdata = dcache_cached_r ? dcache_temp_rdata : uncache_temp_rdata; - - // mmu u_inst_mmu( - // .addr_i (inst_sram_addr ), - // .addr_o (inst_sram_addr_mmu ), - // .cache_v (icache_cached ) - // ); mmu data_mmu( .addr_i (data_sram_addr ), .addr_o (data_sram_addr_mmu ), .cache_v (dcache_cached ) ); - - // cache signal from tlb - // begin - //assign dcache_uncached = 1'b0; - - // end - axi_ctrl_v5 axi_ctrl( .clk (clk ), .reset (~resetn ), diff --git a/lacpu/rtl/mycpu/pip_ctrl.v b/lacpu/rtl/mycpu/pip_ctrl.v index 80b9b2a..c3114f6 100644 --- a/lacpu/rtl/mycpu/pip_ctrl.v +++ b/lacpu/rtl/mycpu/pip_ctrl.v @@ -34,24 +34,11 @@ module pip_ctrl( flush = 0; stall = `StallBus'b111111; end - //id段发生暂停，此时id及之前暂? else if (stallreq_ds) begin flush = 0; stall = `StallBus'b000111; end - - // else if(stallreq_fs_for_cache) begin - // flush = 0; - // stall = `StallBus'b000011; - // end - // else if(stallreq_es_for_cache) begin - // flush = 0; - // stall = `StallBus'b011111; - // end - // else if(stallreq_cache) begin - // flush = 0; - // stall = `StallBus'b111111; - // end + else begin flush = 0; stall = `StallBus'b000000; diff --git a/lacpu/rtl/mycpu/uncache.v b/lacpu/rtl/mycpu/uncache.v index 46e757b..352bce0 100644 --- a/lacpu/rtl/mycpu/uncache.v +++ b/lacpu/rtl/mycpu/uncache.v @@ -50,13 +50,6 @@ module uncache end end - // assign rd_req = conf_en & ~valid & ~(|conf_we); - // assign rd_addr = conf_addr; - // assign wr_req = conf_en & ~valid & (|conf_we); - // assign wr_wstrb = conf_we; - // assign wr_addr = conf_addr; - // assign wr_data = conf_wdata; - always @ (posedge clk) begin if (!resetn) begin conf_rdata <= 32'b0; diff --git a/lacpu/rtl/xilinx_ip/axi_crossbar_1x2/axi_crossbar_1x2.xci b/lacpu/rtl/xilinx_ip/axi_crossbar_1x2/axi_crossbar_1x2.xci index 634625d..b03ef73 100644 --- a/lacpu/rtl/xilinx_ip/axi_crossbar_1x2/axi_crossbar_1x2.xci +++ b/lacpu/rtl/xilinx_ip/axi_crossbar_1x2/axi_crossbar_1x2.xci @@ -1023,10 +1023,10 @@ artix7 0x0000001c0000001d0000001e0000001e000000180000000000000000000000000000001000000010 0x0000000000000000000000008000000000000000c00000000000000040000000000000001c000000ffffffffffffffffffffffffffffffffffffffffffffffff00000000bfaf0000000000001faf0000 - 0x0000000100000001 + 0xFFFFFFFFFFFFFFFF 0x0000000400000004 - 0x0000000000000000 - 0x0000000100000001 + 0x00000000 + 0xFFFFFFFFFFFFFFFF 0x0000000400000004 5 2 @@ -2246,7 +2246,7 @@ VERILOG MIXED - -1 + -2 TRUE diff --git a/lacpu/rtl/xilinx_ip/axi_ram/axi_ram.xci b/lacpu/rtl/xilinx_ip/axi_ram/axi_ram.xci index badac87..c26f160 100644 --- a/lacpu/rtl/xilinx_ip/axi_ram/axi_ram.xci +++ b/lacpu/rtl/xilinx_ip/axi_ram/axi_ram.xci @@ -131,9 +131,9 @@ 0 0 axi_ram.mem - axi_ram.mif + no_coe_file_loaded 1 - 1 + 0 1 0 1 @@ -172,7 +172,7 @@ true 8 NONE - ../../../../../cdp_ede_local/mycpu_env/func/obj/inst_ram.coe + no_coe_file_loaded ALL axi_ram false @@ -189,7 +189,7 @@ Single_Bit_Error_Injection true AXI4 - true + false no_mem_loaded Simple_Dual_Port_RAM READ_FIRST @@ -244,7 +244,7 @@ VERILOG MIXED - -1 + -2 TRUE diff --git a/lacpu/rtl/xilinx_ip/clk_pll/clk_pll.xci b/lacpu/rtl/xilinx_ip/clk_pll/clk_pll.xci index 6d2938c..dbc4249 100644 --- a/lacpu/rtl/xilinx_ip/clk_pll/clk_pll.xci +++ b/lacpu/rtl/xilinx_ip/clk_pll/clk_pll.xci @@ -98,17 +98,17 @@ 100.0 0000 0000 - 75.00000 + 90.00000 0000 0000 100.00000 BUFG 50.0 false - 75.00000 + 90.00000 0.000 50.000 - 75.000 + 90.000 0.000 1 0000 @@ -203,16 +203,16 @@ din 0000 1 - 0.75 - 0.75 - 0.75 - 0.75 - 0.75 - 0.75 + 0.9 + 0.9 + 0.9 + 0.9 + 0.9 + 0.9 dout drdy dwe - 42.000 + 49.000 1.000 0 0 @@ -251,7 +251,7 @@ FALSE 10.000 10.000 - 12.000 + 10.000 0.500 0.000 FALSE @@ -292,7 +292,7 @@ 2 Output Output Phase Duty Cycle Pk-to-Pk Phase Clock Freq (MHz) (degrees) (%) Jitter (ps) Error (ps) - _cpu_clk__75.00000______0.000______50.0______146.170____105.461 + _cpu_clk__90.00000______0.000______50.0______140.709____105.461 timer_clk__100.00000______0.000______50.0______137.681____105.461 no_CLK_OUT3_output no_CLK_OUT4_output @@ -393,7 +393,7 @@ 0 0 0 - 1600.000 + 1866.000 800.000 clk_pll MMCM @@ -414,11 +414,11 @@ 100.0 0.010 BUFG - 146.170 + 140.709 false 105.461 50.000 - 75.000 + 90.000 0.000 1 true @@ -530,7 +530,7 @@ false 10.000 10.000 - 12 + 10 0.500 0.000 false @@ -659,7 +659,7 @@ VERILOG MIXED - -1 + -2 TRUE diff --git a/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank.dcp b/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank.dcp index 8a7b6b2..66a2721 100644 Binary files a/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank.dcp and b/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank.dcp differ diff --git a/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank.xci b/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank.xci index da49afe..dc8424d 100644 --- a/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank.xci +++ b/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank.xci @@ -244,7 +244,7 @@ VERILOG MIXED - -1 + -2 TRUE diff --git a/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank.xml b/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank.xml index ad4df44..5fd6074 100644 --- a/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank.xml +++ b/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank.xml @@ -1457,11 +1457,11 @@ GENtimestamp - Sun Jul 30 23:02:01 UTC 2023 + Fri Aug 04 07:02:12 UTC 2023 outputProductCRC - 9:52a41c7b + 9:2ebdaf5f @@ -1477,11 +1477,11 @@ GENtimestamp - Sun Jul 30 23:02:01 UTC 2023 + Fri Aug 04 07:02:49 UTC 2023 outputProductCRC - 9:52a41c7b + 9:2ebdaf5f @@ -1492,7 +1492,7 @@ outputProductCRC - 9:52a41c7b + 9:2ebdaf5f @@ -1508,86 +1508,11 @@ GENtimestamp - Sun Jul 30 23:02:01 UTC 2023 + Fri Aug 04 07:02:49 UTC 2023 outputProductCRC - 9:52a41c7b - - - - - xilinx_anylanguagebehavioralsimulation - Simulation - :vivado.xilinx.com:simulation - blk_mem_gen_v8_4_4 - - xilinx_anylanguagebehavioralsimulation_view_fileset - - - - GENtimestamp - Sun Jul 30 23:02:01 UTC 2023 - - - outputProductCRC - 9:949760af - - - - - xilinx_verilogsimulationwrapper - Verilog Simulation Wrapper - verilogSource:vivado.xilinx.com:simulation.wrapper - verilog - data_bram_bank - - xilinx_verilogsimulationwrapper_view_fileset - - - - GENtimestamp - Sun Jul 30 23:02:01 UTC 2023 - - - outputProductCRC - 9:949760af - - - - - xilinx_project_archive - Miscellaneous - :vivado.xilinx.com:misc.files - - xilinx_project_archive_view_fileset - - - - GENtimestamp - Sun Jul 30 23:02:01 UTC 2023 - - - outputProductCRC - 9:52a41c7b - - - - - xilinx_versioninformation - Version Information - :vivado.xilinx.com:docs.versioninfo - - xilinx_versioninformation_view_fileset - - - - GENtimestamp - Sun Jul 30 23:02:01 UTC 2023 - - - outputProductCRC - 9:52a41c7b + 9:2ebdaf5f @@ -1601,11 +1526,11 @@ GENtimestamp - Sun Jul 30 23:02:57 UTC 2023 + Fri Aug 04 07:04:01 UTC 2023 outputProductCRC - 9:52a41c7b + 9:2ebdaf5f @@ -1619,7 +1544,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -1642,7 +1566,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -1665,7 +1588,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -1688,7 +1610,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -1715,7 +1636,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -1742,7 +1662,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -1769,7 +1688,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -1796,7 +1714,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -1816,7 +1733,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -1839,7 +1755,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -1862,7 +1777,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -1885,7 +1799,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -1912,7 +1825,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -1939,7 +1851,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -1966,7 +1877,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -1993,7 +1903,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2013,7 +1922,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2036,7 +1944,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2059,7 +1966,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2082,7 +1988,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2102,7 +2007,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2126,7 +2030,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2146,7 +2049,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2169,7 +2071,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2192,7 +2093,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2215,7 +2115,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2235,7 +2134,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2255,7 +2153,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2278,7 +2175,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2305,7 +2201,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2332,7 +2227,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2359,7 +2253,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2386,7 +2279,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2413,7 +2305,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2436,7 +2327,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2459,7 +2349,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2483,7 +2372,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2510,7 +2398,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2533,7 +2420,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2556,7 +2442,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2579,7 +2464,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2603,7 +2487,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2627,7 +2510,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2647,7 +2529,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2667,7 +2548,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2694,7 +2574,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2721,7 +2600,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2748,7 +2626,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2775,7 +2652,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2802,7 +2678,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2825,7 +2700,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2848,7 +2722,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2872,7 +2745,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2896,7 +2768,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2920,7 +2791,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2940,7 +2810,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2960,7 +2829,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -2980,7 +2848,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -3003,7 +2870,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -3026,7 +2892,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -3049,7 +2914,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -3069,7 +2933,6 @@ std_logic xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -3093,7 +2956,6 @@ std_logic_vector xilinx_vhdlsynthesis - xilinx_anylanguagebehavioralsimulation @@ -3569,42 +3431,6 @@ xil_defaultlib - - xilinx_anylanguagebehavioralsimulation_view_fileset - - simulation/blk_mem_gen_v8_4.v - verilogSource - USED_IN_ipstatic - blk_mem_gen_v8_4_4 - blk_mem_gen_v8_4_4 - - - - xilinx_verilogsimulationwrapper_view_fileset - - sim/data_bram_bank.v - verilogSource - xil_defaultlib - - - - xilinx_project_archive_view_fileset - - summary.log - log - - - misc/blk_mem_gen_v8_4.vhd - vhdlSource - - - - xilinx_versioninformation_view_fileset - - doc/blk_mem_gen_v8_4_changelog.txt - text - - xilinx_externalfiles_view_fileset diff --git a/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_sim_netlist.v b/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_sim_netlist.v index 97d612e..4b0ed93 100644 --- a/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_sim_netlist.v +++ b/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_sim_netlist.v @@ -1,14 +1,14 @@ // Copyright 1986-2019 Xilinx, Inc. All Rights Reserved. // -------------------------------------------------------------------------------- // Tool Version: Vivado v.2019.2 (win64) Build 2708876 Wed Nov 6 21:40:23 MST 2019 -// Date : Mon Jul 31 07:02:57 2023 +// Date : Fri Aug 4 15:04:01 2023 // Host : BHKLaptop running 64-bit major release (build 9200) // Command : write_verilog -force -mode funcsim // C:/Users/Unbal/Desktop/LoongArch/neulacpu/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_sim_netlist.v // Design : data_bram_bank // Purpose : This verilog netlist is a functional simulation representation of the design and should not be modified // or synthesized. This netlist cannot be used for SDF annotated simulation. -// Device : xc7a200tfbg676-1 +// Device : xc7a200tfbg676-2 // -------------------------------------------------------------------------------- `timescale 1 ps / 1 ps diff --git a/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_sim_netlist.vhdl b/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_sim_netlist.vhdl index 00a432c..a78e76a 100644 --- a/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_sim_netlist.vhdl +++ b/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_sim_netlist.vhdl @@ -1,14 +1,14 @@ -- Copyright 1986-2019 Xilinx, Inc. All Rights Reserved. -- -------------------------------------------------------------------------------- -- Tool Version: Vivado v.2019.2 (win64) Build 2708876 Wed Nov 6 21:40:23 MST 2019 --- Date : Mon Jul 31 07:02:57 2023 +-- Date : Fri Aug 4 15:04:01 2023 -- Host : BHKLaptop running 64-bit major release (build 9200) -- Command : write_vhdl -force -mode funcsim -- C:/Users/Unbal/Desktop/LoongArch/neulacpu/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_sim_netlist.vhdl -- Design : data_bram_bank -- Purpose : This VHDL netlist is a functional simulation representation of the design and should not be modified or -- synthesized. This netlist cannot be used for SDF annotated simulation. --- Device : xc7a200tfbg676-1 +-- Device : xc7a200tfbg676-2 -- -------------------------------------------------------------------------------- library IEEE; use IEEE.STD_LOGIC_1164.ALL; diff --git a/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_stub.v b/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_stub.v index a398432..e8bb7a2 100644 --- a/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_stub.v +++ b/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_stub.v @@ -1,13 +1,13 @@ // Copyright 1986-2019 Xilinx, Inc. All Rights Reserved. // -------------------------------------------------------------------------------- // Tool Version: Vivado v.2019.2 (win64) Build 2708876 Wed Nov 6 21:40:23 MST 2019 -// Date : Mon Jul 31 07:02:57 2023 +// Date : Fri Aug 4 15:04:01 2023 // Host : BHKLaptop running 64-bit major release (build 9200) // Command : write_verilog -force -mode synth_stub // C:/Users/Unbal/Desktop/LoongArch/neulacpu/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_stub.v // Design : data_bram_bank // Purpose : Stub declaration of top-level module interface -// Device : xc7a200tfbg676-1 +// Device : xc7a200tfbg676-2 // -------------------------------------------------------------------------------- // This empty module with port declaration file causes synthesis tools to infer a black box for IP. diff --git a/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_stub.vhdl b/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_stub.vhdl index 8e6cd4a..9689512 100644 --- a/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_stub.vhdl +++ b/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_stub.vhdl @@ -1,13 +1,13 @@ -- Copyright 1986-2019 Xilinx, Inc. All Rights Reserved. -- -------------------------------------------------------------------------------- -- Tool Version: Vivado v.2019.2 (win64) Build 2708876 Wed Nov 6 21:40:23 MST 2019 --- Date : Mon Jul 31 07:02:57 2023 +-- Date : Fri Aug 4 15:04:01 2023 -- Host : BHKLaptop running 64-bit major release (build 9200) -- Command : write_vhdl -force -mode synth_stub -- C:/Users/Unbal/Desktop/LoongArch/neulacpu/lacpu/rtl/xilinx_ip/data_sram_bank/data_bram_bank_stub.vhdl -- Design : data_bram_bank -- Purpose : Stub declaration of top-level module interface --- Device : xc7a200tfbg676-1 +-- Device : xc7a200tfbg676-2 -- -------------------------------------------------------------------------------- library IEEE; use IEEE.STD_LOGIC_1164.ALL; diff --git a/lacpu/rtl/xilinx_ip/data_sram_bank/doc/blk_mem_gen_v8_4_changelog.txt b/lacpu/rtl/xilinx_ip/data_sram_bank/doc/blk_mem_gen_v8_4_changelog.txt deleted file mode 100644 index a1de82f..0000000 --- a/lacpu/rtl/xilinx_ip/data_sram_bank/doc/blk_mem_gen_v8_4_changelog.txt +++ /dev/null @@ -1,207 +0,0 @@ -2019.2: - * Version 8.4 (Rev. 4) - * Feature Enhancement: Read Latency parameters exposed to IP GUI for URAM configurations - -2019.1.3: - * Version 8.4 (Rev. 3) - * No changes - -2019.1.2: - * Version 8.4 (Rev. 3) - * No changes - -2019.1.1: - * Version 8.4 (Rev. 3) - * No changes - -2019.1: - * Version 8.4 (Rev. 3) - * General: Internal device family change, no functional changes - -2018.3.1: - * Version 8.4 (Rev. 2) - * No changes - -2018.3: - * Version 8.4 (Rev. 2) - * Feature Enhancement: Read Latency Support added for URAM when selected through IP Integrator - * Other: Power Calculations disabled for URAM primitives in IP GUI, no functional changes - * Other: Internal device family change, no functional changes - -2018.2: - * Version 8.4 (Rev. 1) - * No changes - -2018.1: - * Version 8.4 (Rev. 1) - * No changes - -2017.4: - * Version 8.4 (Rev. 1) - * General: Write depth shown in IP GUI is now dependent on number of BRAMs available in a chosen device, no functional changes - -2017.3: - * Version 8.4 - * General: Safety Circuit option is enabled by default if reset option in any one port is enabled - -2017.2: - * Version 8.3 (Rev. 6) - * No changes - -2017.1: - * Version 8.3 (Rev. 6) - * General: Internal device family change, no functional changes - * General: When common_clock is selected clkb is internally connected to clka, but the interface remains same to support the backword compatiability. User make sure of connecting the both the clocks to same clock source when in common_clock mode - -2016.4: - * Version 8.3 (Rev. 5) - * General: Fixes for behavioral Model issues when built-IN ECC is enabled (to be consistent with RTL) - -2016.3: - * Version 8.3 (Rev. 4) - * Feature Enhancement: URAM addressing updates while calling XPM_Memory when 32-bit addressing is enabled - * Other: Enable support for future devices - * Other: Source HDL files are concatenated into a single file to speed up synthesis and simulation. No changes required by the user - -2016.2: - * Version 8.3 (Rev. 3) - * updated the IP,not to set WRITE_DEPTH parameter to 8192 everytime when the mode is switched to BRAM_Controller - * Updated the IP to support the device package changes - -2016.1: - * Version 8.3 (Rev. 2) - * Updated the IP to deliver only verilog behavioral model - * Updated the IP to support UltraRAM in IP Integrator - * Updated the IP to support the device package changes - -2015.4.2: - * Version 8.3 (Rev. 1) - * No changes - -2015.4.1: - * Version 8.3 (Rev. 1) - * No changes - -2015.4: - * Version 8.3 (Rev. 1) - * Updated the IP to support the device package changes - -2015.3: - * Version 8.3 - * IP revision number added to HDL module, library, and include file names, to support designs with both locked and upgraded IP instances - * New ports rsta_busy and rstb_busy are added to enable the safety circuitry to minimize the occurrence of BRAM data corruption - * Simulation models are delivered in VHDL only - -2015.2.1: - * Version 8.2 (Rev. 5) - * No changes - -2015.2: - * Version 8.2 (Rev. 5) - * No changes - -2015.1: - * Version 8.2 (Rev. 5) - * Delivering non encrypted behavioral models - * Supported memory depth is increased up to 1M words - * Added the power saving feature (RDADDRCHG) for ultrascale devices - * Supported devices and production status are now determined automatically, to simplify support for future devices - -2014.4.1: - * Version 8.2 (Rev. 4) - * Updated the IP to support the device package changes - -2014.4: - * Version 8.2 (Rev. 3) - * Encrypted source files are concatenated together to reduce the number of files and to reduce simulator compile time - * Added support for 7-series Automotive (XA) and Defense Grade (XQ) devices - * Internal device family change, no functional changes - -2014.3: - * Version 8.2 (Rev. 2) - * Fixed the Memory Resource Doubling issue in Simple Dual Port RAM when aspect ratio is used - * Fixed the GUI crash in Simple Dual Port RAM - * Added support of all write modes in Simple Dual Port RAM when ECC is not used - * Increased the supported depth to a maximum value of 256k - -2014.2: - * Version 8.2 (Rev. 1) - * Updated the GUI tool tip for Byte write enable in the page-1 of block memory generator GUI - -2014.1: - * Version 8.2 - * Added support of the cascaded Primitives of widths 1 and 2 for ultra-scale devices - * Added support of the ECCPIPE register in the built-in ecc mode for ultra-scale devices - * Added support of the dynamic power saving for ultra-scale devices - * Improved timing efficiency in the IP Integrator by minimizing the use of output mux for the 7-series devices - * Internal device family name change, no functional changes - -2013.4: - * Version 8.1 - * The Primitive output registers are made "ON" by default in the stand alone mode - * Added cascaded support for ultrascale devices to construct 64Kx1 primitive by using two 32Kx1 primitives - * Added support for ultrascale devices - -2013.3: - * Version 8.0 (Rev. 2) - * Added parameter "CTRL_ECC_ALGO" for supporting ECC in IP Integrator. - * Improved GUI speed and responsivness, no functional changes - * Reduced synthesis and simulation warnings - * Added support for Cadence IES and Synopsys VCS simulators - * Changed the default option of ENABLE PORT TYPE to "USE_ENA_PIN" - * Changed BRAM Interface DIN and DOUT to match bus interface directions. - -2013.2: - * Version 8.0 (Rev. 1) - * No Changes - -2013.1: - * Version 8.0 - * Native Vivado Release - * There have been no functional or interface changes to this IP. The version number has changed to support unique versioning in Vivado starting with 2013.1. - -(c) Copyright 2002 - 2019 Xilinx, Inc. All rights reserved. - -This file contains confidential and proprietary information -of Xilinx, Inc. and is protected under U.S. and -international copyright and other intellectual property -laws. - -DISCLAIMER -This disclaimer is not a license and does not grant any -rights to the materials distributed herewith. Except as -otherwise provided in a valid license issued to you by -Xilinx, and to the maximum extent permitted by applicable -law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -(2) Xilinx shall not be liable (whether in contract or tort, -including negligence, or under any other theory of -liability) for any loss or damage of any kind or nature -related to, arising under or in connection with these -materials, including for any direct, or any indirect, -special, incidental, or consequential loss or damage -(including loss of data, profits, goodwill, or any type of -loss or damage suffered as a result of any action brought -by a third party) even if such damage or loss was -reasonably foreseeable or Xilinx had been advised of the -possibility of the same. - -CRITICAL APPLICATIONS -Xilinx products are not designed or intended to be fail- -safe, or for use in any application requiring fail-safe -performance, such as life-support or safety devices or -systems, Class III medical devices, nuclear facilities, -applications related to the deployment of airbags, or any -other applications that could lead to death, personal -injury, or severe property or environmental damage -(individually and collectively, "Critical -Applications"). Customer assumes the sole risk and -liability of any use of Xilinx products in Critical -Applications, subject only to applicable laws and -regulations governing limitations on product liability. - -THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -PART OF THIS FILE AT ALL TIMES. diff --git a/lacpu/rtl/xilinx_ip/data_sram_bank/misc/blk_mem_gen_v8_4.vhd b/lacpu/rtl/xilinx_ip/data_sram_bank/misc/blk_mem_gen_v8_4.vhd deleted file mode 100644 index 6137db8..0000000 --- a/lacpu/rtl/xilinx_ip/data_sram_bank/misc/blk_mem_gen_v8_4.vhd +++ /dev/null @@ -1,150 +0,0 @@ -library ieee; -use ieee.std_logic_1164.all; - -entity blk_mem_gen_v8_4_4 is - generic ( - C_FAMILY : string := "virtex7"; - C_XDEVICEFAMILY : string := "virtex7"; - C_ELABORATION_DIR : string := ""; - C_INTERFACE_TYPE : integer := 0; - C_AXI_TYPE : integer := 1; - C_AXI_SLAVE_TYPE : integer := 0; - C_USE_BRAM_BLOCK : integer := 0; - C_ENABLE_32BIT_ADDRESS : integer := 0; - C_CTRL_ECC_ALGO : string := "ECCHSIAO32-7"; - C_HAS_AXI_ID : integer := 0; - C_AXI_ID_WIDTH : integer := 4; - C_MEM_TYPE : integer := 2; - C_BYTE_SIZE : integer := 9; - C_ALGORITHM : integer := 0; - C_PRIM_TYPE : integer := 3; - C_LOAD_INIT_FILE : integer := 0; - C_INIT_FILE_NAME : string := "no_coe_file_loaded"; - C_INIT_FILE : string := "no_mem_file_loaded"; - C_USE_DEFAULT_DATA : integer := 0; - C_DEFAULT_DATA : string := "0"; - C_HAS_RSTA : integer := 0; - C_RST_PRIORITY_A : string := "ce"; - C_RSTRAM_A : integer := 0; - C_INITA_VAL : string := "0"; - C_HAS_ENA : integer := 1; - C_HAS_REGCEA : integer := 0; - C_USE_BYTE_WEA : integer := 0; - C_WEA_WIDTH : integer := 1; - C_WRITE_MODE_A : string := "WRITE_FIRST"; - C_WRITE_WIDTH_A : integer := 9; - C_READ_WIDTH_A : integer := 9; - C_WRITE_DEPTH_A : integer := 2048; - C_READ_DEPTH_A : integer := 2048; - C_ADDRA_WIDTH : integer := 11; - C_HAS_RSTB : integer := 0; - C_RST_PRIORITY_B : string := "ce"; - C_RSTRAM_B : integer := 0; - C_INITB_VAL : string := "0"; - C_HAS_ENB : integer := 1; - C_HAS_REGCEB : integer := 0; - C_USE_BYTE_WEB : integer := 0; - C_WEB_WIDTH : integer := 1; - C_WRITE_MODE_B : string := "WRITE_FIRST"; - C_WRITE_WIDTH_B : integer := 9; - C_READ_WIDTH_B : integer := 9; - C_WRITE_DEPTH_B : integer := 2048; - C_READ_DEPTH_B : integer := 2048; - C_ADDRB_WIDTH : integer := 11; - C_HAS_MEM_OUTPUT_REGS_A : integer := 0; - C_HAS_MEM_OUTPUT_REGS_B : integer := 0; - C_HAS_MUX_OUTPUT_REGS_A : integer := 0; - C_HAS_MUX_OUTPUT_REGS_B : integer := 0; - C_MUX_PIPELINE_STAGES : integer := 0; - C_HAS_SOFTECC_INPUT_REGS_A : integer := 0; - C_HAS_SOFTECC_OUTPUT_REGS_B : integer := 0; - C_USE_SOFTECC : integer := 0; - C_USE_ECC : integer := 0; - C_EN_ECC_PIPE : integer := 0; - C_HAS_INJECTERR : integer := 0; - C_SIM_COLLISION_CHECK : string := "none"; - C_COMMON_CLK : integer := 0; - C_DISABLE_WARN_BHV_COLL : integer := 0; - C_EN_SLEEP_PIN : integer := 0; - C_USE_URAM : integer := 0; - C_EN_RDADDRA_CHG : integer := 0; - C_EN_RDADDRB_CHG : integer := 0; - C_EN_DEEPSLEEP_PIN : integer := 0; - C_EN_SHUTDOWN_PIN : integer := 0; - C_EN_SAFETY_CKT : integer := 0; - C_DISABLE_WARN_BHV_RANGE : integer := 0; - C_COUNT_36K_BRAM : string := ""; - C_COUNT_18K_BRAM : string := ""; - C_EST_POWER_SUMMARY : string := "" - ); - port ( - clka : in std_logic := '0'; - rsta : in std_logic := '0'; - ena : in std_logic := '0'; - regcea : in std_logic := '0'; - wea : in std_logic_vector(c_wea_width - 1 downto 0) := (others => '0'); - addra : in std_logic_vector(c_addra_width - 1 downto 0) := (others => '0'); - dina : in std_logic_vector(c_write_width_a - 1 downto 0) := (others => '0'); - douta : out std_logic_vector(c_read_width_a - 1 downto 0); - clkb : in std_logic := '0'; - rstb : in std_logic := '0'; - enb : in std_logic := '0'; - regceb : in std_logic := '0'; - web : in std_logic_vector(c_web_width - 1 downto 0) := (others => '0'); - addrb : in std_logic_vector(c_addrb_width - 1 downto 0) := (others => '0'); - dinb : in std_logic_vector(c_write_width_b - 1 downto 0) := (others => '0'); - doutb : out std_logic_vector(c_read_width_b - 1 downto 0); - injectsbiterr : in std_logic := '0'; - injectdbiterr : in std_logic := '0'; - eccpipece : in std_logic := '0'; - sbiterr : out std_logic; - dbiterr : out std_logic; - rdaddrecc : out std_logic_vector(c_addrb_width - 1 downto 0); - sleep : in std_logic := '0'; - deepsleep : in std_logic := '0'; - shutdown : in std_logic := '0'; - rsta_busy : out std_logic; - rstb_busy : out std_logic; - s_aclk : in std_logic := '0'; - s_aresetn : in std_logic := '0'; - s_axi_awid : in std_logic_vector(c_axi_id_width - 1 downto 0) := (others => '0'); - s_axi_awaddr : in std_logic_vector(31 downto 0) := (others => '0'); - s_axi_awlen : in std_logic_vector(7 downto 0) := (others => '0'); - s_axi_awsize : in std_logic_vector(2 downto 0) := (others => '0'); - s_axi_awburst : in std_logic_vector(1 downto 0) := (others => '0'); - s_axi_awvalid : in std_logic := '0'; - s_axi_awready : out std_logic; - s_axi_wdata : in std_logic_vector(c_write_width_a - 1 downto 0) := (others => '0'); - s_axi_wstrb : in std_logic_vector(c_wea_width - 1 downto 0) := (others => '0'); - s_axi_wlast : in std_logic := '0'; - s_axi_wvalid : in std_logic := '0'; - s_axi_wready : out std_logic; - s_axi_bid : out std_logic_vector(c_axi_id_width - 1 downto 0); - s_axi_bresp : out std_logic_vector(1 downto 0); - s_axi_bvalid : out std_logic; - s_axi_bready : in std_logic := '0'; - s_axi_arid : in std_logic_vector(c_axi_id_width - 1 downto 0) := (others => '0'); - s_axi_araddr : in std_logic_vector(31 downto 0) := (others => '0'); - s_axi_arlen : in std_logic_vector(8 - 1 downto 0) := (others => '0'); - s_axi_arsize : in std_logic_vector(2 downto 0) := (others => '0'); - s_axi_arburst : in std_logic_vector(1 downto 0) := (others => '0'); - s_axi_arvalid : in std_logic := '0'; - s_axi_arready : out std_logic; - s_axi_rid : out std_logic_vector(c_axi_id_width - 1 downto 0); - s_axi_rdata : out std_logic_vector(c_write_width_b - 1 downto 0); - s_axi_rresp : out std_logic_vector(2 - 1 downto 0); - s_axi_rlast : out std_logic; - s_axi_rvalid : out std_logic; - s_axi_rready : in std_logic := '0'; - s_axi_injectsbiterr : in std_logic := '0'; - s_axi_injectdbiterr : in std_logic := '0'; - s_axi_sbiterr : out std_logic; - s_axi_dbiterr : out std_logic; - s_axi_rdaddrecc : out std_logic_vector(c_addrb_width - 1 downto 0) - ); -end entity blk_mem_gen_v8_4_4; - -architecture xilinx of blk_mem_gen_v8_4_4 is - begin - end -architecture xilinx; diff --git a/lacpu/rtl/xilinx_ip/data_sram_bank/sim/data_bram_bank.v b/lacpu/rtl/xilinx_ip/data_sram_bank/sim/data_bram_bank.v deleted file mode 100644 index 9ea440f..0000000 --- a/lacpu/rtl/xilinx_ip/data_sram_bank/sim/data_bram_bank.v +++ /dev/null @@ -1,220 +0,0 @@ -// (c) Copyright 1995-2023 Xilinx, Inc. All rights reserved. -// -// This file contains confidential and proprietary information -// of Xilinx, Inc. and is protected under U.S. and -// international copyright and other intellectual property -// laws. -// -// DISCLAIMER -// This disclaimer is not a license and does not grant any -// rights to the materials distributed herewith. Except as -// otherwise provided in a valid license issued to you by -// Xilinx, and to the maximum extent permitted by applicable -// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -// (2) Xilinx shall not be liable (whether in contract or tort, -// including negligence, or under any other theory of -// liability) for any loss or damage of any kind or nature -// related to, arising under or in connection with these -// materials, including for any direct, or any indirect, -// special, incidental, or consequential loss or damage -// (including loss of data, profits, goodwill, or any type of -// loss or damage suffered as a result of any action brought -// by a third party) even if such damage or loss was -// reasonably foreseeable or Xilinx had been advised of the -// possibility of the same. -// -// CRITICAL APPLICATIONS -// Xilinx products are not designed or intended to be fail- -// safe, or for use in any application requiring fail-safe -// performance, such as life-support or safety devices or -// systems, Class III medical devices, nuclear facilities, -// applications related to the deployment of airbags, or any -// other applications that could lead to death, personal -// injury, or severe property or environmental damage -// (individually and collectively, "Critical -// Applications"). Customer assumes the sole risk and -// liability of any use of Xilinx products in Critical -// Applications, subject only to applicable laws and -// regulations governing limitations on product liability. -// -// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -// PART OF THIS FILE AT ALL TIMES. -// -// DO NOT MODIFY THIS FILE. - - -// IP VLNV: xilinx.com:ip:blk_mem_gen:8.4 -// IP Revision: 4 - -`timescale 1ns/1ps - -(* DowngradeIPIdentifiedWarnings = "yes" *) -module data_bram_bank ( - clka, - ena, - wea, - addra, - dina, - douta -); - -(* X_INTERFACE_INFO = "xilinx.com:interface:bram:1.0 BRAM_PORTA CLK" *) -input wire clka; -(* X_INTERFACE_INFO = "xilinx.com:interface:bram:1.0 BRAM_PORTA EN" *) -input wire ena; -(* X_INTERFACE_INFO = "xilinx.com:interface:bram:1.0 BRAM_PORTA WE" *) -input wire [3 : 0] wea; -(* X_INTERFACE_INFO = "xilinx.com:interface:bram:1.0 BRAM_PORTA ADDR" *) -input wire [5 : 0] addra; -(* X_INTERFACE_INFO = "xilinx.com:interface:bram:1.0 BRAM_PORTA DIN" *) -input wire [31 : 0] dina; -(* X_INTERFACE_PARAMETER = "XIL_INTERFACENAME BRAM_PORTA, MEM_SIZE 8192, MEM_WIDTH 32, MEM_ECC NONE, MASTER_TYPE OTHER, READ_LATENCY 1" *) -(* X_INTERFACE_INFO = "xilinx.com:interface:bram:1.0 BRAM_PORTA DOUT" *) -output wire [31 : 0] douta; - - blk_mem_gen_v8_4_4 #( - .C_FAMILY("artix7"), - .C_XDEVICEFAMILY("artix7"), - .C_ELABORATION_DIR("./"), - .C_INTERFACE_TYPE(0), - .C_AXI_TYPE(1), - .C_AXI_SLAVE_TYPE(0), - .C_USE_BRAM_BLOCK(0), - .C_ENABLE_32BIT_ADDRESS(0), - .C_CTRL_ECC_ALGO("NONE"), - .C_HAS_AXI_ID(0), - .C_AXI_ID_WIDTH(4), - .C_MEM_TYPE(0), - .C_BYTE_SIZE(8), - .C_ALGORITHM(1), - .C_PRIM_TYPE(1), - .C_LOAD_INIT_FILE(0), - .C_INIT_FILE_NAME("no_coe_file_loaded"), - .C_INIT_FILE("data_bram_bank.mem"), - .C_USE_DEFAULT_DATA(0), - .C_DEFAULT_DATA("0"), - .C_HAS_RSTA(0), - .C_RST_PRIORITY_A("CE"), - .C_RSTRAM_A(0), - .C_INITA_VAL("0"), - .C_HAS_ENA(1), - .C_HAS_REGCEA(0), - .C_USE_BYTE_WEA(1), - .C_WEA_WIDTH(4), - .C_WRITE_MODE_A("WRITE_FIRST"), - .C_WRITE_WIDTH_A(32), - .C_READ_WIDTH_A(32), - .C_WRITE_DEPTH_A(64), - .C_READ_DEPTH_A(64), - .C_ADDRA_WIDTH(6), - .C_HAS_RSTB(0), - .C_RST_PRIORITY_B("CE"), - .C_RSTRAM_B(0), - .C_INITB_VAL("0"), - .C_HAS_ENB(0), - .C_HAS_REGCEB(0), - .C_USE_BYTE_WEB(1), - .C_WEB_WIDTH(4), - .C_WRITE_MODE_B("WRITE_FIRST"), - .C_WRITE_WIDTH_B(32), - .C_READ_WIDTH_B(32), - .C_WRITE_DEPTH_B(64), - .C_READ_DEPTH_B(64), - .C_ADDRB_WIDTH(6), - .C_HAS_MEM_OUTPUT_REGS_A(0), - .C_HAS_MEM_OUTPUT_REGS_B(0), - .C_HAS_MUX_OUTPUT_REGS_A(0), - .C_HAS_MUX_OUTPUT_REGS_B(0), - .C_MUX_PIPELINE_STAGES(0), - .C_HAS_SOFTECC_INPUT_REGS_A(0), - .C_HAS_SOFTECC_OUTPUT_REGS_B(0), - .C_USE_SOFTECC(0), - .C_USE_ECC(0), - .C_EN_ECC_PIPE(0), - .C_READ_LATENCY_A(1), - .C_READ_LATENCY_B(1), - .C_HAS_INJECTERR(0), - .C_SIM_COLLISION_CHECK("ALL"), - .C_COMMON_CLK(0), - .C_DISABLE_WARN_BHV_COLL(0), - .C_EN_SLEEP_PIN(0), - .C_USE_URAM(0), - .C_EN_RDADDRA_CHG(0), - .C_EN_RDADDRB_CHG(0), - .C_EN_DEEPSLEEP_PIN(0), - .C_EN_SHUTDOWN_PIN(0), - .C_EN_SAFETY_CKT(0), - .C_DISABLE_WARN_BHV_RANGE(0), - .C_COUNT_36K_BRAM("0"), - .C_COUNT_18K_BRAM("1"), - .C_EST_POWER_SUMMARY("Estimated Power for IP : 3.53845 mW") - ) inst ( - .clka(clka), - .rsta(1'D0), - .ena(ena), - .regcea(1'D0), - .wea(wea), - .addra(addra), - .dina(dina), - .douta(douta), - .clkb(1'D0), - .rstb(1'D0), - .enb(1'D0), - .regceb(1'D0), - .web(4'B0), - .addrb(6'B0), - .dinb(32'B0), - .doutb(), - .injectsbiterr(1'D0), - .injectdbiterr(1'D0), - .eccpipece(1'D0), - .sbiterr(), - .dbiterr(), - .rdaddrecc(), - .sleep(1'D0), - .deepsleep(1'D0), - .shutdown(1'D0), - .rsta_busy(), - .rstb_busy(), - .s_aclk(1'H0), - .s_aresetn(1'D0), - .s_axi_awid(4'B0), - .s_axi_awaddr(32'B0), - .s_axi_awlen(8'B0), - .s_axi_awsize(3'B0), - .s_axi_awburst(2'B0), - .s_axi_awvalid(1'D0), - .s_axi_awready(), - .s_axi_wdata(32'B0), - .s_axi_wstrb(4'B0), - .s_axi_wlast(1'D0), - .s_axi_wvalid(1'D0), - .s_axi_wready(), - .s_axi_bid(), - .s_axi_bresp(), - .s_axi_bvalid(), - .s_axi_bready(1'D0), - .s_axi_arid(4'B0), - .s_axi_araddr(32'B0), - .s_axi_arlen(8'B0), - .s_axi_arsize(3'B0), - .s_axi_arburst(2'B0), - .s_axi_arvalid(1'D0), - .s_axi_arready(), - .s_axi_rid(), - .s_axi_rdata(), - .s_axi_rresp(), - .s_axi_rlast(), - .s_axi_rvalid(), - .s_axi_rready(1'D0), - .s_axi_injectsbiterr(1'D0), - .s_axi_injectdbiterr(1'D0), - .s_axi_sbiterr(), - .s_axi_dbiterr(), - .s_axi_rdaddrecc() - ); -endmodule diff --git a/lacpu/rtl/xilinx_ip/data_sram_bank/simulation/blk_mem_gen_v8_4.v b/lacpu/rtl/xilinx_ip/data_sram_bank/simulation/blk_mem_gen_v8_4.v deleted file mode 100644 index 73b8240..0000000 --- a/lacpu/rtl/xilinx_ip/data_sram_bank/simulation/blk_mem_gen_v8_4.v +++ /dev/null @@ -1,4522 +0,0 @@ -/****************************************************************************** --- (c) Copyright 2006 - 2013 Xilinx, Inc. All rights reserved. --- --- This file contains confidential and proprietary information --- of Xilinx, Inc. and is protected under U.S. and --- international copyright and other intellectual property --- laws. --- --- DISCLAIMER --- This disclaimer is not a license and does not grant any --- rights to the materials distributed herewith. Except as --- otherwise provided in a valid license issued to you by --- Xilinx, and to the maximum extent permitted by applicable --- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND --- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES --- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING --- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- --- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and --- (2) Xilinx shall not be liable (whether in contract or tort, --- including negligence, or under any other theory of --- liability) for any loss or damage of any kind or nature --- related to, arising under or in connection with these --- materials, including for any direct, or any indirect, --- special, incidental, or consequential loss or damage --- (including loss of data, profits, goodwill, or any type of --- loss or damage suffered as a result of any action brought --- by a third party) even if such damage or loss was --- reasonably foreseeable or Xilinx had been advised of the --- possibility of the same. --- --- CRITICAL APPLICATIONS --- Xilinx products are not designed or intended to be fail- --- safe, or for use in any application requiring fail-safe --- performance, such as life-support or safety devices or --- systems, Class III medical devices, nuclear facilities, --- applications related to the deployment of airbags, or any --- other applications that could lead to death, personal --- injury, or severe property or environmental damage --- (individually and collectively, "Critical --- Applications"). Customer assumes the sole risk and --- liability of any use of Xilinx products in Critical --- Applications, subject only to applicable laws and --- regulations governing limitations on product liability. --- --- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS --- PART OF THIS FILE AT ALL TIMES. --- - ***************************************************************************** - * - * Filename: blk_mem_gen_v8_4_4.v - * - * Description: - * This file is the Verilog behvarial model for the - * Block Memory Generator Core. - * - ***************************************************************************** - * Author: Xilinx - * - * History: Jan 11, 2006 Initial revision - * Jun 11, 2007 Added independent register stages for - * Port A and Port B (IP1_Jm/v2.5) - * Aug 28, 2007 Added mux pipeline stages feature (IP2_Jm/v2.6) - * Mar 13, 2008 Behavioral model optimizations - * April 07, 2009 : Added support for Spartan-6 and Virtex-6 - * features, including the following: - * (i) error injection, detection and/or correction - * (ii) reset priority - * (iii) special reset behavior - * - *****************************************************************************/ -`timescale 1ps/1ps - -module STATE_LOGIC_v8_4 (O, I0, I1, I2, I3, I4, I5); - - parameter INIT = 64'h0000000000000000; - - input I0, I1, I2, I3, I4, I5; - - output O; - - reg O; - reg tmp; - - always @( I5 or I4 or I3 or I2 or I1 or I0 ) begin - - tmp = I0 ^ I1 ^ I2 ^ I3 ^ I4 ^ I5; - - if ( tmp == 0 || tmp == 1) - - O = INIT[{I5, I4, I3, I2, I1, I0}]; - - end -endmodule - -module beh_vlog_muxf7_v8_4 (O, I0, I1, S); - - output O; - reg O; - - input I0, I1, S; - - always @(I0 or I1 or S) - if (S) - O = I1; - else - O = I0; -endmodule - -module beh_vlog_ff_clr_v8_4 (Q, C, CLR, D); - parameter INIT = 0; -localparam FLOP_DELAY = 100; - output Q; - - input C, CLR, D; - - reg Q; - - initial Q= 1'b0; - - always @(posedge C ) - if (CLR) - Q<= 1'b0; - else - Q<= #FLOP_DELAY D; - - -endmodule - -module beh_vlog_ff_pre_v8_4 (Q, C, D, PRE); - - parameter INIT = 0; -localparam FLOP_DELAY = 100; - output Q; - input C, D, PRE; - - reg Q; - - initial Q= 1'b0; - - always @(posedge C ) - if (PRE) - Q <= 1'b1; - else - Q <= #FLOP_DELAY D; - -endmodule - -module beh_vlog_ff_ce_clr_v8_4 (Q, C, CE, CLR, D); - - parameter INIT = 0; -localparam FLOP_DELAY = 100; - output Q; - input C, CE, CLR, D; - - reg Q; - - initial Q= 1'b0; - always @(posedge C ) - if (CLR) - Q <= 1'b0; - else if (CE) - Q <= #FLOP_DELAY D; - -endmodule - -module write_netlist_v8_4 -#( - parameter C_AXI_TYPE = 0 - ) - ( - S_ACLK, S_ARESETN, S_AXI_AWVALID, S_AXI_WVALID, S_AXI_BREADY, - w_last_c, bready_timeout_c, aw_ready_r, S_AXI_WREADY, S_AXI_BVALID, - S_AXI_WR_EN, addr_en_c, incr_addr_c, bvalid_c - ); - - input S_ACLK; - input S_ARESETN; - input S_AXI_AWVALID; - input S_AXI_WVALID; - input S_AXI_BREADY; - input w_last_c; - input bready_timeout_c; - output aw_ready_r; - output S_AXI_WREADY; - output S_AXI_BVALID; - output S_AXI_WR_EN; - output addr_en_c; - output incr_addr_c; - output bvalid_c; - //------------------------------------------------------------------------- - //AXI LITE - //------------------------------------------------------------------------- -generate if (C_AXI_TYPE == 0 ) begin : gbeh_axi_lite_sm - wire w_ready_r_7; - wire w_ready_c; - wire aw_ready_c; - wire NlwRenamedSignal_bvalid_c; - wire NlwRenamedSignal_incr_addr_c; - wire present_state_FSM_FFd3_13; - wire present_state_FSM_FFd2_14; - wire present_state_FSM_FFd1_15; - wire present_state_FSM_FFd4_16; - wire present_state_FSM_FFd4_In; - wire present_state_FSM_FFd3_In; - wire present_state_FSM_FFd2_In; - wire present_state_FSM_FFd1_In; - wire present_state_FSM_FFd4_In1_21; - wire [0:0] Mmux_aw_ready_c ; -begin - assign - S_AXI_WREADY = w_ready_r_7, - S_AXI_BVALID = NlwRenamedSignal_incr_addr_c, - S_AXI_WR_EN = NlwRenamedSignal_bvalid_c, - incr_addr_c = NlwRenamedSignal_incr_addr_c, - bvalid_c = NlwRenamedSignal_bvalid_c; - - assign NlwRenamedSignal_incr_addr_c = 1'b0; - - beh_vlog_ff_clr_v8_4 #( - .INIT (1'b0)) - aw_ready_r_2 ( - .C ( S_ACLK), - .CLR ( S_ARESETN), - .D ( aw_ready_c), - .Q ( aw_ready_r) - ); - beh_vlog_ff_clr_v8_4 #( - .INIT (1'b0)) - w_ready_r ( - .C ( S_ACLK), - .CLR ( S_ARESETN), - .D ( w_ready_c), - .Q ( w_ready_r_7) - ); - beh_vlog_ff_pre_v8_4 #( - .INIT (1'b1)) - present_state_FSM_FFd4 ( - .C ( S_ACLK), - .D ( present_state_FSM_FFd4_In), - .PRE ( S_ARESETN), - .Q ( present_state_FSM_FFd4_16) - ); - beh_vlog_ff_clr_v8_4 #( - .INIT (1'b0)) - present_state_FSM_FFd3 ( - .C ( S_ACLK), - .CLR ( S_ARESETN), - .D ( present_state_FSM_FFd3_In), - .Q ( present_state_FSM_FFd3_13) - ); - beh_vlog_ff_clr_v8_4 #( - .INIT (1'b0)) - present_state_FSM_FFd2 ( - .C ( S_ACLK), - .CLR ( S_ARESETN), - .D ( present_state_FSM_FFd2_In), - .Q ( present_state_FSM_FFd2_14) - ); -beh_vlog_ff_clr_v8_4 #( - .INIT (1'b0)) - present_state_FSM_FFd1 ( - .C ( S_ACLK), - .CLR ( S_ARESETN), - .D ( present_state_FSM_FFd1_In), - .Q ( present_state_FSM_FFd1_15) - ); -STATE_LOGIC_v8_4 #( - .INIT (64'h0000000055554440)) - present_state_FSM_FFd3_In1 ( - .I0 ( S_AXI_WVALID), - .I1 ( S_AXI_AWVALID), - .I2 ( present_state_FSM_FFd2_14), - .I3 ( present_state_FSM_FFd4_16), - .I4 ( present_state_FSM_FFd3_13), - .I5 (1'b0), - .O ( present_state_FSM_FFd3_In) - ); -STATE_LOGIC_v8_4 #( - .INIT (64'h0000000088880800)) - present_state_FSM_FFd2_In1 ( - .I0 ( S_AXI_AWVALID), - .I1 ( S_AXI_WVALID), - .I2 ( bready_timeout_c), - .I3 ( present_state_FSM_FFd2_14), - .I4 ( present_state_FSM_FFd4_16), - .I5 (1'b0), - .O ( present_state_FSM_FFd2_In) - ); -STATE_LOGIC_v8_4 #( - .INIT (64'h00000000AAAA2000)) - Mmux_addr_en_c_0_1 ( - .I0 ( S_AXI_AWVALID), - .I1 ( bready_timeout_c), - .I2 ( present_state_FSM_FFd2_14), - .I3 ( S_AXI_WVALID), - .I4 ( present_state_FSM_FFd4_16), - .I5 (1'b0), - .O ( addr_en_c) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'hF5F07570F5F05500)) - Mmux_w_ready_c_0_1 ( - .I0 ( S_AXI_WVALID), - .I1 ( bready_timeout_c), - .I2 ( S_AXI_AWVALID), - .I3 ( present_state_FSM_FFd3_13), - .I4 ( present_state_FSM_FFd4_16), - .I5 ( present_state_FSM_FFd2_14), - .O ( w_ready_c) - ); -STATE_LOGIC_v8_4 #( - .INIT (64'h88808880FFFF8880)) - present_state_FSM_FFd1_In1 ( - .I0 ( S_AXI_WVALID), - .I1 ( bready_timeout_c), - .I2 ( present_state_FSM_FFd3_13), - .I3 ( present_state_FSM_FFd2_14), - .I4 ( present_state_FSM_FFd1_15), - .I5 ( S_AXI_BREADY), - .O ( present_state_FSM_FFd1_In) - ); -STATE_LOGIC_v8_4 #( - .INIT (64'h00000000000000A8)) - Mmux_S_AXI_WR_EN_0_1 ( - .I0 ( S_AXI_WVALID), - .I1 ( present_state_FSM_FFd2_14), - .I2 ( present_state_FSM_FFd3_13), - .I3 (1'b0), - .I4 (1'b0), - .I5 (1'b0), - .O ( NlwRenamedSignal_bvalid_c) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h2F0F27072F0F2200)) - present_state_FSM_FFd4_In1 ( - .I0 ( S_AXI_WVALID), - .I1 ( bready_timeout_c), - .I2 ( S_AXI_AWVALID), - .I3 ( present_state_FSM_FFd3_13), - .I4 ( present_state_FSM_FFd4_16), - .I5 ( present_state_FSM_FFd2_14), - .O ( present_state_FSM_FFd4_In1_21) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h00000000000000F8)) - present_state_FSM_FFd4_In2 ( - .I0 ( present_state_FSM_FFd1_15), - .I1 ( S_AXI_BREADY), - .I2 ( present_state_FSM_FFd4_In1_21), - .I3 (1'b0), - .I4 (1'b0), - .I5 (1'b0), - .O ( present_state_FSM_FFd4_In) - ); -STATE_LOGIC_v8_4 #( - .INIT (64'h7535753575305500)) - Mmux_aw_ready_c_0_1 ( - .I0 ( S_AXI_AWVALID), - .I1 ( bready_timeout_c), - .I2 ( S_AXI_WVALID), - .I3 ( present_state_FSM_FFd4_16), - .I4 ( present_state_FSM_FFd3_13), - .I5 ( present_state_FSM_FFd2_14), - .O ( Mmux_aw_ready_c[0]) - ); -STATE_LOGIC_v8_4 #( - .INIT (64'h00000000000000F8)) - Mmux_aw_ready_c_0_2 ( - .I0 ( present_state_FSM_FFd1_15), - .I1 ( S_AXI_BREADY), - .I2 ( Mmux_aw_ready_c[0]), - .I3 (1'b0), - .I4 (1'b0), - .I5 (1'b0), - .O ( aw_ready_c) - ); -end -end -endgenerate - - //--------------------------------------------------------------------- - // AXI FULL - //--------------------------------------------------------------------- -generate if (C_AXI_TYPE == 1 ) begin : gbeh_axi_full_sm - wire w_ready_r_8; - wire w_ready_c; - wire aw_ready_c; - wire NlwRenamedSig_OI_bvalid_c; - wire present_state_FSM_FFd1_16; - wire present_state_FSM_FFd4_17; - wire present_state_FSM_FFd3_18; - wire present_state_FSM_FFd2_19; - wire present_state_FSM_FFd4_In; - wire present_state_FSM_FFd3_In; - wire present_state_FSM_FFd2_In; - wire present_state_FSM_FFd1_In; - wire present_state_FSM_FFd2_In1_24; - wire present_state_FSM_FFd4_In1_25; - wire N2; - wire N4; -begin -assign - S_AXI_WREADY = w_ready_r_8, - bvalid_c = NlwRenamedSig_OI_bvalid_c, - S_AXI_BVALID = 1'b0; - -beh_vlog_ff_clr_v8_4 #( - .INIT (1'b0)) - aw_ready_r_2 - ( - .C ( S_ACLK), - .CLR ( S_ARESETN), - .D ( aw_ready_c), - .Q ( aw_ready_r) - ); -beh_vlog_ff_clr_v8_4 #( - .INIT (1'b0)) - w_ready_r - ( - .C ( S_ACLK), - .CLR ( S_ARESETN), - .D ( w_ready_c), - .Q ( w_ready_r_8) - ); - beh_vlog_ff_pre_v8_4 #( - .INIT (1'b1)) - present_state_FSM_FFd4 - ( - .C ( S_ACLK), - .D ( present_state_FSM_FFd4_In), - .PRE ( S_ARESETN), - .Q ( present_state_FSM_FFd4_17) - ); -beh_vlog_ff_clr_v8_4 #( - .INIT (1'b0)) - present_state_FSM_FFd3 - ( - .C ( S_ACLK), - .CLR ( S_ARESETN), - .D ( present_state_FSM_FFd3_In), - .Q ( present_state_FSM_FFd3_18) - ); -beh_vlog_ff_clr_v8_4 #( - .INIT (1'b0)) - present_state_FSM_FFd2 - ( - .C ( S_ACLK), - .CLR ( S_ARESETN), - .D ( present_state_FSM_FFd2_In), - .Q ( present_state_FSM_FFd2_19) - ); - beh_vlog_ff_clr_v8_4 #( - .INIT (1'b0)) - present_state_FSM_FFd1 - ( - .C ( S_ACLK), - .CLR ( S_ARESETN), - .D ( present_state_FSM_FFd1_In), - .Q ( present_state_FSM_FFd1_16) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h0000000000005540)) - present_state_FSM_FFd3_In1 - ( - .I0 ( S_AXI_WVALID), - .I1 ( present_state_FSM_FFd4_17), - .I2 ( S_AXI_AWVALID), - .I3 ( present_state_FSM_FFd3_18), - .I4 (1'b0), - .I5 (1'b0), - .O ( present_state_FSM_FFd3_In) - ); -STATE_LOGIC_v8_4 #( - .INIT (64'hBF3FBB33AF0FAA00)) - Mmux_aw_ready_c_0_2 - ( - .I0 ( S_AXI_BREADY), - .I1 ( bready_timeout_c), - .I2 ( S_AXI_AWVALID), - .I3 ( present_state_FSM_FFd1_16), - .I4 ( present_state_FSM_FFd4_17), - .I5 ( NlwRenamedSig_OI_bvalid_c), - .O ( aw_ready_c) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'hAAAAAAAA20000000)) - Mmux_addr_en_c_0_1 - ( - .I0 ( S_AXI_AWVALID), - .I1 ( bready_timeout_c), - .I2 ( present_state_FSM_FFd2_19), - .I3 ( S_AXI_WVALID), - .I4 ( w_last_c), - .I5 ( present_state_FSM_FFd4_17), - .O ( addr_en_c) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h00000000000000A8)) - Mmux_S_AXI_WR_EN_0_1 - ( - .I0 ( S_AXI_WVALID), - .I1 ( present_state_FSM_FFd2_19), - .I2 ( present_state_FSM_FFd3_18), - .I3 (1'b0), - .I4 (1'b0), - .I5 (1'b0), - .O ( S_AXI_WR_EN) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h0000000000002220)) - Mmux_incr_addr_c_0_1 - ( - .I0 ( S_AXI_WVALID), - .I1 ( w_last_c), - .I2 ( present_state_FSM_FFd2_19), - .I3 ( present_state_FSM_FFd3_18), - .I4 (1'b0), - .I5 (1'b0), - .O ( incr_addr_c) - ); -STATE_LOGIC_v8_4 #( - .INIT (64'h0000000000008880)) - Mmux_aw_ready_c_0_11 - ( - .I0 ( S_AXI_WVALID), - .I1 ( w_last_c), - .I2 ( present_state_FSM_FFd2_19), - .I3 ( present_state_FSM_FFd3_18), - .I4 (1'b0), - .I5 (1'b0), - .O ( NlwRenamedSig_OI_bvalid_c) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h000000000000D5C0)) - present_state_FSM_FFd2_In1 - ( - .I0 ( w_last_c), - .I1 ( S_AXI_AWVALID), - .I2 ( present_state_FSM_FFd4_17), - .I3 ( present_state_FSM_FFd3_18), - .I4 (1'b0), - .I5 (1'b0), - .O ( present_state_FSM_FFd2_In1_24) - ); -STATE_LOGIC_v8_4 #( - .INIT (64'hFFFFAAAA08AAAAAA)) - present_state_FSM_FFd2_In2 - ( - .I0 ( present_state_FSM_FFd2_19), - .I1 ( S_AXI_AWVALID), - .I2 ( bready_timeout_c), - .I3 ( w_last_c), - .I4 ( S_AXI_WVALID), - .I5 ( present_state_FSM_FFd2_In1_24), - .O ( present_state_FSM_FFd2_In) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h00C0004000C00000)) - present_state_FSM_FFd4_In1 - ( - .I0 ( S_AXI_AWVALID), - .I1 ( w_last_c), - .I2 ( S_AXI_WVALID), - .I3 ( bready_timeout_c), - .I4 ( present_state_FSM_FFd3_18), - .I5 ( present_state_FSM_FFd2_19), - .O ( present_state_FSM_FFd4_In1_25) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h00000000FFFF88F8)) - present_state_FSM_FFd4_In2 - ( - .I0 ( present_state_FSM_FFd1_16), - .I1 ( S_AXI_BREADY), - .I2 ( present_state_FSM_FFd4_17), - .I3 ( S_AXI_AWVALID), - .I4 ( present_state_FSM_FFd4_In1_25), - .I5 (1'b0), - .O ( present_state_FSM_FFd4_In) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h0000000000000007)) - Mmux_w_ready_c_0_SW0 - ( - .I0 ( w_last_c), - .I1 ( S_AXI_WVALID), - .I2 (1'b0), - .I3 (1'b0), - .I4 (1'b0), - .I5 (1'b0), - .O ( N2) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'hFABAFABAFAAAF000)) - Mmux_w_ready_c_0_Q - ( - .I0 ( N2), - .I1 ( bready_timeout_c), - .I2 ( S_AXI_AWVALID), - .I3 ( present_state_FSM_FFd4_17), - .I4 ( present_state_FSM_FFd3_18), - .I5 ( present_state_FSM_FFd2_19), - .O ( w_ready_c) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h0000000000000008)) - Mmux_aw_ready_c_0_11_SW0 - ( - .I0 ( bready_timeout_c), - .I1 ( S_AXI_WVALID), - .I2 (1'b0), - .I3 (1'b0), - .I4 (1'b0), - .I5 (1'b0), - .O ( N4) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h88808880FFFF8880)) - present_state_FSM_FFd1_In1 - ( - .I0 ( w_last_c), - .I1 ( N4), - .I2 ( present_state_FSM_FFd2_19), - .I3 ( present_state_FSM_FFd3_18), - .I4 ( present_state_FSM_FFd1_16), - .I5 ( S_AXI_BREADY), - .O ( present_state_FSM_FFd1_In) - ); -end -end -endgenerate -endmodule - - -module read_netlist_v8_4 #( - parameter C_AXI_TYPE = 1, - parameter C_ADDRB_WIDTH = 12 - ) ( S_AXI_R_LAST_INT, S_ACLK, S_ARESETN, S_AXI_ARVALID, - S_AXI_RREADY,S_AXI_INCR_ADDR,S_AXI_ADDR_EN, - S_AXI_SINGLE_TRANS,S_AXI_MUX_SEL, S_AXI_R_LAST, S_AXI_ARREADY, - S_AXI_RLAST, S_AXI_RVALID, S_AXI_RD_EN, S_AXI_ARLEN); - - input S_AXI_R_LAST_INT; - input S_ACLK; - input S_ARESETN; - input S_AXI_ARVALID; - input S_AXI_RREADY; - output S_AXI_INCR_ADDR; - output S_AXI_ADDR_EN; - output S_AXI_SINGLE_TRANS; - output S_AXI_MUX_SEL; - output S_AXI_R_LAST; - output S_AXI_ARREADY; - output S_AXI_RLAST; - output S_AXI_RVALID; - output S_AXI_RD_EN; - input [7:0] S_AXI_ARLEN; - - wire present_state_FSM_FFd1_13 ; - wire present_state_FSM_FFd2_14 ; - wire gaxi_full_sm_outstanding_read_r_15 ; - wire gaxi_full_sm_ar_ready_r_16 ; - wire gaxi_full_sm_r_last_r_17 ; - wire NlwRenamedSig_OI_gaxi_full_sm_r_valid_r ; - wire gaxi_full_sm_r_valid_c ; - wire S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o ; - wire gaxi_full_sm_ar_ready_c ; - wire gaxi_full_sm_outstanding_read_c ; - wire NlwRenamedSig_OI_S_AXI_R_LAST ; - wire S_AXI_ARLEN_7_GND_8_o_equal_1_o ; - wire present_state_FSM_FFd2_In ; - wire present_state_FSM_FFd1_In ; - wire Mmux_S_AXI_R_LAST13 ; - wire N01 ; - wire N2 ; - wire Mmux_gaxi_full_sm_ar_ready_c11 ; - wire N4 ; - wire N8 ; - wire N9 ; - wire N10 ; - wire N11 ; - wire N12 ; - wire N13 ; - assign - S_AXI_R_LAST = NlwRenamedSig_OI_S_AXI_R_LAST, - S_AXI_ARREADY = gaxi_full_sm_ar_ready_r_16, - S_AXI_RLAST = gaxi_full_sm_r_last_r_17, - S_AXI_RVALID = NlwRenamedSig_OI_gaxi_full_sm_r_valid_r; - - beh_vlog_ff_clr_v8_4 #( - .INIT (1'b0)) - gaxi_full_sm_outstanding_read_r ( - .C (S_ACLK), - .CLR(S_ARESETN), - .D(gaxi_full_sm_outstanding_read_c), - .Q(gaxi_full_sm_outstanding_read_r_15) - ); - beh_vlog_ff_ce_clr_v8_4 #( - .INIT (1'b0)) - gaxi_full_sm_r_valid_r ( - .C (S_ACLK), - .CE (S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o), - .CLR (S_ARESETN), - .D (gaxi_full_sm_r_valid_c), - .Q (NlwRenamedSig_OI_gaxi_full_sm_r_valid_r) - ); - beh_vlog_ff_clr_v8_4 #( - .INIT (1'b0)) - gaxi_full_sm_ar_ready_r ( - .C (S_ACLK), - .CLR (S_ARESETN), - .D (gaxi_full_sm_ar_ready_c), - .Q (gaxi_full_sm_ar_ready_r_16) - ); - beh_vlog_ff_ce_clr_v8_4 #( - .INIT(1'b0)) - gaxi_full_sm_r_last_r ( - .C (S_ACLK), - .CE (S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o), - .CLR (S_ARESETN), - .D (NlwRenamedSig_OI_S_AXI_R_LAST), - .Q (gaxi_full_sm_r_last_r_17) - ); - beh_vlog_ff_clr_v8_4 #( - .INIT (1'b0)) - present_state_FSM_FFd2 ( - .C ( S_ACLK), - .CLR ( S_ARESETN), - .D ( present_state_FSM_FFd2_In), - .Q ( present_state_FSM_FFd2_14) - ); - beh_vlog_ff_clr_v8_4 #( - .INIT (1'b0)) - present_state_FSM_FFd1 ( - .C (S_ACLK), - .CLR (S_ARESETN), - .D (present_state_FSM_FFd1_In), - .Q (present_state_FSM_FFd1_13) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h000000000000000B)) - S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o1 ( - .I0 ( S_AXI_RREADY), - .I1 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r), - .I2 (1'b0), - .I3 (1'b0), - .I4 (1'b0), - .I5 (1'b0), - .O (S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h0000000000000008)) - Mmux_S_AXI_SINGLE_TRANS11 ( - .I0 (S_AXI_ARVALID), - .I1 (S_AXI_ARLEN_7_GND_8_o_equal_1_o), - .I2 (1'b0), - .I3 (1'b0), - .I4 (1'b0), - .I5 (1'b0), - .O (S_AXI_SINGLE_TRANS) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h0000000000000004)) - Mmux_S_AXI_ADDR_EN11 ( - .I0 (present_state_FSM_FFd1_13), - .I1 (S_AXI_ARVALID), - .I2 (1'b0), - .I3 (1'b0), - .I4 (1'b0), - .I5 (1'b0), - .O (S_AXI_ADDR_EN) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'hECEE2022EEEE2022)) - present_state_FSM_FFd2_In1 ( - .I0 ( S_AXI_ARVALID), - .I1 ( present_state_FSM_FFd1_13), - .I2 ( S_AXI_RREADY), - .I3 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o), - .I4 ( present_state_FSM_FFd2_14), - .I5 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r), - .O ( present_state_FSM_FFd2_In) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h0000000044440444)) - Mmux_S_AXI_R_LAST131 ( - .I0 ( present_state_FSM_FFd1_13), - .I1 ( S_AXI_ARVALID), - .I2 ( present_state_FSM_FFd2_14), - .I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r), - .I4 ( S_AXI_RREADY), - .I5 (1'b0), - .O ( Mmux_S_AXI_R_LAST13) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h4000FFFF40004000)) - Mmux_S_AXI_INCR_ADDR11 ( - .I0 ( S_AXI_R_LAST_INT), - .I1 ( S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o), - .I2 ( present_state_FSM_FFd2_14), - .I3 ( present_state_FSM_FFd1_13), - .I4 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o), - .I5 ( Mmux_S_AXI_R_LAST13), - .O ( S_AXI_INCR_ADDR) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h00000000000000FE)) - S_AXI_ARLEN_7_GND_8_o_equal_1_o_7_SW0 ( - .I0 ( S_AXI_ARLEN[2]), - .I1 ( S_AXI_ARLEN[1]), - .I2 ( S_AXI_ARLEN[0]), - .I3 ( 1'b0), - .I4 ( 1'b0), - .I5 ( 1'b0), - .O ( N01) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h0000000000000001)) - S_AXI_ARLEN_7_GND_8_o_equal_1_o_7_Q ( - .I0 ( S_AXI_ARLEN[7]), - .I1 ( S_AXI_ARLEN[6]), - .I2 ( S_AXI_ARLEN[5]), - .I3 ( S_AXI_ARLEN[4]), - .I4 ( S_AXI_ARLEN[3]), - .I5 ( N01), - .O ( S_AXI_ARLEN_7_GND_8_o_equal_1_o) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h0000000000000007)) - Mmux_gaxi_full_sm_outstanding_read_c1_SW0 ( - .I0 ( S_AXI_ARVALID), - .I1 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o), - .I2 ( 1'b0), - .I3 ( 1'b0), - .I4 ( 1'b0), - .I5 ( 1'b0), - .O ( N2) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h0020000002200200)) - Mmux_gaxi_full_sm_outstanding_read_c1 ( - .I0 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r), - .I1 ( S_AXI_RREADY), - .I2 ( present_state_FSM_FFd1_13), - .I3 ( present_state_FSM_FFd2_14), - .I4 ( gaxi_full_sm_outstanding_read_r_15), - .I5 ( N2), - .O ( gaxi_full_sm_outstanding_read_c) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h0000000000004555)) - Mmux_gaxi_full_sm_ar_ready_c12 ( - .I0 ( S_AXI_ARVALID), - .I1 ( S_AXI_RREADY), - .I2 ( present_state_FSM_FFd2_14), - .I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r), - .I4 ( 1'b0), - .I5 ( 1'b0), - .O ( Mmux_gaxi_full_sm_ar_ready_c11) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h00000000000000EF)) - Mmux_S_AXI_R_LAST11_SW0 ( - .I0 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o), - .I1 ( S_AXI_RREADY), - .I2 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r), - .I3 ( 1'b0), - .I4 ( 1'b0), - .I5 ( 1'b0), - .O ( N4) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'hFCAAFC0A00AA000A)) - Mmux_S_AXI_R_LAST11 ( - .I0 ( S_AXI_ARVALID), - .I1 ( gaxi_full_sm_outstanding_read_r_15), - .I2 ( present_state_FSM_FFd2_14), - .I3 ( present_state_FSM_FFd1_13), - .I4 ( N4), - .I5 ( S_AXI_RREADY_gaxi_full_sm_r_valid_r_OR_9_o), - .O ( gaxi_full_sm_r_valid_c) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h00000000AAAAAA08)) - S_AXI_MUX_SEL1 ( - .I0 (present_state_FSM_FFd1_13), - .I1 (NlwRenamedSig_OI_gaxi_full_sm_r_valid_r), - .I2 (S_AXI_RREADY), - .I3 (present_state_FSM_FFd2_14), - .I4 (gaxi_full_sm_outstanding_read_r_15), - .I5 (1'b0), - .O (S_AXI_MUX_SEL) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'hF3F3F755A2A2A200)) - Mmux_S_AXI_RD_EN11 ( - .I0 ( present_state_FSM_FFd1_13), - .I1 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r), - .I2 ( S_AXI_RREADY), - .I3 ( gaxi_full_sm_outstanding_read_r_15), - .I4 ( present_state_FSM_FFd2_14), - .I5 ( S_AXI_ARVALID), - .O ( S_AXI_RD_EN) - ); - beh_vlog_muxf7_v8_4 present_state_FSM_FFd1_In3 ( - .I0 ( N8), - .I1 ( N9), - .S ( present_state_FSM_FFd1_13), - .O ( present_state_FSM_FFd1_In) - ); - - STATE_LOGIC_v8_4 #( - .INIT (64'h000000005410F4F0)) - present_state_FSM_FFd1_In3_F ( - .I0 ( S_AXI_RREADY), - .I1 ( present_state_FSM_FFd2_14), - .I2 ( S_AXI_ARVALID), - .I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r), - .I4 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o), - .I5 ( 1'b0), - .O ( N8) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h0000000072FF7272)) - present_state_FSM_FFd1_In3_G ( - .I0 ( present_state_FSM_FFd2_14), - .I1 ( S_AXI_R_LAST_INT), - .I2 ( gaxi_full_sm_outstanding_read_r_15), - .I3 ( S_AXI_RREADY), - .I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r), - .I5 ( 1'b0), - .O ( N9) - ); - beh_vlog_muxf7_v8_4 Mmux_gaxi_full_sm_ar_ready_c14 ( - .I0 ( N10), - .I1 ( N11), - .S ( present_state_FSM_FFd1_13), - .O ( gaxi_full_sm_ar_ready_c) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h00000000FFFF88A8)) - Mmux_gaxi_full_sm_ar_ready_c14_F ( - .I0 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o), - .I1 ( S_AXI_RREADY), - .I2 ( present_state_FSM_FFd2_14), - .I3 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r), - .I4 ( Mmux_gaxi_full_sm_ar_ready_c11), - .I5 ( 1'b0), - .O ( N10) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h000000008D008D8D)) - Mmux_gaxi_full_sm_ar_ready_c14_G ( - .I0 ( present_state_FSM_FFd2_14), - .I1 ( S_AXI_R_LAST_INT), - .I2 ( gaxi_full_sm_outstanding_read_r_15), - .I3 ( S_AXI_RREADY), - .I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r), - .I5 ( 1'b0), - .O ( N11) - ); - beh_vlog_muxf7_v8_4 Mmux_S_AXI_R_LAST1 ( - .I0 ( N12), - .I1 ( N13), - .S ( present_state_FSM_FFd1_13), - .O ( NlwRenamedSig_OI_S_AXI_R_LAST) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h0000000088088888)) - Mmux_S_AXI_R_LAST1_F ( - .I0 ( S_AXI_ARLEN_7_GND_8_o_equal_1_o), - .I1 ( S_AXI_ARVALID), - .I2 ( present_state_FSM_FFd2_14), - .I3 ( S_AXI_RREADY), - .I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r), - .I5 ( 1'b0), - .O ( N12) - ); - STATE_LOGIC_v8_4 #( - .INIT (64'h00000000E400E4E4)) - Mmux_S_AXI_R_LAST1_G ( - .I0 ( present_state_FSM_FFd2_14), - .I1 ( gaxi_full_sm_outstanding_read_r_15), - .I2 ( S_AXI_R_LAST_INT), - .I3 ( S_AXI_RREADY), - .I4 ( NlwRenamedSig_OI_gaxi_full_sm_r_valid_r), - .I5 ( 1'b0), - .O ( N13) - ); - -endmodule - - -module blk_mem_axi_write_wrapper_beh_v8_4 - # ( - // AXI Interface related parameters start here - parameter C_INTERFACE_TYPE = 0, // 0: Native Interface; 1: AXI Interface - parameter C_AXI_TYPE = 0, // 0: AXI Lite; 1: AXI Full; - parameter C_AXI_SLAVE_TYPE = 0, // 0: MEMORY SLAVE; 1: PERIPHERAL SLAVE; - parameter C_MEMORY_TYPE = 0, // 0: SP-RAM, 1: SDP-RAM; 2: TDP-RAM; 3: DP-ROM; - parameter C_WRITE_DEPTH_A = 0, - parameter C_AXI_AWADDR_WIDTH = 32, - parameter C_ADDRA_WIDTH = 12, - parameter C_AXI_WDATA_WIDTH = 32, - parameter C_HAS_AXI_ID = 0, - parameter C_AXI_ID_WIDTH = 4, - // AXI OUTSTANDING WRITES - parameter C_AXI_OS_WR = 2 - ) - ( - // AXI Global Signals - input S_ACLK, - input S_ARESETN, - // AXI Full/Lite Slave Write Channel (write side) - input [C_AXI_ID_WIDTH-1:0] S_AXI_AWID, - input [C_AXI_AWADDR_WIDTH-1:0] S_AXI_AWADDR, - input [8-1:0] S_AXI_AWLEN, - input [2:0] S_AXI_AWSIZE, - input [1:0] S_AXI_AWBURST, - input S_AXI_AWVALID, - output S_AXI_AWREADY, - input S_AXI_WVALID, - output S_AXI_WREADY, - output reg [C_AXI_ID_WIDTH-1:0] S_AXI_BID = 0, - output S_AXI_BVALID, - input S_AXI_BREADY, - // Signals for BMG interface - output [C_ADDRA_WIDTH-1:0] S_AXI_AWADDR_OUT, - output S_AXI_WR_EN - ); - - localparam FLOP_DELAY = 100; // 100 ps - - localparam C_RANGE = ((C_AXI_WDATA_WIDTH == 8)?0: - ((C_AXI_WDATA_WIDTH==16)?1: - ((C_AXI_WDATA_WIDTH==32)?2: - ((C_AXI_WDATA_WIDTH==64)?3: - ((C_AXI_WDATA_WIDTH==128)?4: - ((C_AXI_WDATA_WIDTH==256)?5:0)))))); - - - - - wire bvalid_c ; - reg bready_timeout_c = 0; - wire [1:0] bvalid_rd_cnt_c; - reg bvalid_r = 0; - reg [2:0] bvalid_count_r = 0; - reg [((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)? - C_AXI_AWADDR_WIDTH:C_ADDRA_WIDTH)-1:0] awaddr_reg = 0; - reg [1:0] bvalid_wr_cnt_r = 0; - reg [1:0] bvalid_rd_cnt_r = 0; - wire w_last_c ; - wire addr_en_c ; - wire incr_addr_c ; - wire aw_ready_r ; - wire dec_alen_c ; - reg bvalid_d1_c = 0; - reg [7:0] awlen_cntr_r = 0; - reg [7:0] awlen_int = 0; - reg [1:0] awburst_int = 0; - - integer total_bytes = 0; - integer wrap_boundary = 0; - integer wrap_base_addr = 0; - integer num_of_bytes_c = 0; - integer num_of_bytes_r = 0; - // Array to store BIDs - reg [C_AXI_ID_WIDTH-1:0] axi_bid_array[3:0] ; - wire S_AXI_BVALID_axi_wr_fsm; - - //------------------------------------- - //AXI WRITE FSM COMPONENT INSTANTIATION - //------------------------------------- - write_netlist_v8_4 #(.C_AXI_TYPE(C_AXI_TYPE)) axi_wr_fsm - ( - .S_ACLK(S_ACLK), - .S_ARESETN(S_ARESETN), - .S_AXI_AWVALID(S_AXI_AWVALID), - .aw_ready_r(aw_ready_r), - .S_AXI_WVALID(S_AXI_WVALID), - .S_AXI_WREADY(S_AXI_WREADY), - .S_AXI_BREADY(S_AXI_BREADY), - .S_AXI_WR_EN(S_AXI_WR_EN), - .w_last_c(w_last_c), - .bready_timeout_c(bready_timeout_c), - .addr_en_c(addr_en_c), - .incr_addr_c(incr_addr_c), - .bvalid_c(bvalid_c), - .S_AXI_BVALID (S_AXI_BVALID_axi_wr_fsm) - ); - - - //Wrap Address boundary calculation - always@(*) begin - num_of_bytes_c = 2**((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_AWSIZE:0); - total_bytes = (num_of_bytes_r)*(awlen_int+1); - wrap_base_addr = ((awaddr_reg)/((total_bytes==0)?1:total_bytes))*(total_bytes); - wrap_boundary = wrap_base_addr+total_bytes; - end - - //------------------------------------------------------------------------- - // BMG address generation - //------------------------------------------------------------------------- - always @(posedge S_ACLK or S_ARESETN) begin - if (S_ARESETN == 1'b1) begin - awaddr_reg <= 0; - num_of_bytes_r <= 0; - awburst_int <= 0; - end else begin - if (addr_en_c == 1'b1) begin - awaddr_reg <= #FLOP_DELAY S_AXI_AWADDR ; - num_of_bytes_r <= num_of_bytes_c; - awburst_int <= ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_AWBURST:2'b01); - end else if (incr_addr_c == 1'b1) begin - if (awburst_int == 2'b10) begin - if(awaddr_reg == (wrap_boundary-num_of_bytes_r)) begin - awaddr_reg <= wrap_base_addr; - end else begin - awaddr_reg <= awaddr_reg + num_of_bytes_r; - end - end else if (awburst_int == 2'b01 || awburst_int == 2'b11) begin - awaddr_reg <= awaddr_reg + num_of_bytes_r; - end - end - end - end - - - assign S_AXI_AWADDR_OUT = ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)? - awaddr_reg[C_AXI_AWADDR_WIDTH-1:C_RANGE]:awaddr_reg); - - //------------------------------------------------------------------------- - // AXI wlast generation - //------------------------------------------------------------------------- - always @(posedge S_ACLK or S_ARESETN) begin - if (S_ARESETN == 1'b1) begin - awlen_cntr_r <= 0; - awlen_int <= 0; - end else begin - if (addr_en_c == 1'b1) begin - awlen_int <= #FLOP_DELAY (C_AXI_TYPE == 0?0:S_AXI_AWLEN) ; - awlen_cntr_r <= #FLOP_DELAY (C_AXI_TYPE == 0?0:S_AXI_AWLEN) ; - end else if (dec_alen_c == 1'b1) begin - awlen_cntr_r <= #FLOP_DELAY awlen_cntr_r - 1 ; - end - end - end - - assign w_last_c = (awlen_cntr_r == 0 && S_AXI_WVALID == 1'b1)?1'b1:1'b0; - - assign dec_alen_c = (incr_addr_c | w_last_c); - - //------------------------------------------------------------------------- - // Generation of bvalid counter for outstanding transactions - //------------------------------------------------------------------------- - always @(posedge S_ACLK or S_ARESETN) begin - if (S_ARESETN == 1'b1) begin - bvalid_count_r <= 0; - end else begin - // bvalid_count_r generation - if (bvalid_c == 1'b1 && bvalid_r == 1'b1 && S_AXI_BREADY == 1'b1) begin - bvalid_count_r <= #FLOP_DELAY bvalid_count_r ; - end else if (bvalid_c == 1'b1) begin - bvalid_count_r <= #FLOP_DELAY bvalid_count_r + 1 ; - end else if (bvalid_r == 1'b1 && S_AXI_BREADY == 1'b1 && bvalid_count_r != 0) begin - bvalid_count_r <= #FLOP_DELAY bvalid_count_r - 1 ; - end - end - end - - //------------------------------------------------------------------------- - // Generation of bvalid when BID is used - //------------------------------------------------------------------------- - generate if (C_HAS_AXI_ID == 1) begin:gaxi_bvalid_id_r - always @(posedge S_ACLK or S_ARESETN) begin - if (S_ARESETN == 1'b1) begin - bvalid_r <= 0; - bvalid_d1_c <= 0; - end else begin - // Delay the generation o bvalid_r for generation for BID - bvalid_d1_c <= bvalid_c; - - //external bvalid signal generation - if (bvalid_d1_c == 1'b1) begin - bvalid_r <= #FLOP_DELAY 1'b1 ; - end else if (bvalid_count_r <= 1 && S_AXI_BREADY == 1'b1) begin - bvalid_r <= #FLOP_DELAY 0 ; - end - end - end - end - endgenerate - - //------------------------------------------------------------------------- - // Generation of bvalid when BID is not used - //------------------------------------------------------------------------- - generate if(C_HAS_AXI_ID == 0) begin:gaxi_bvalid_noid_r - always @(posedge S_ACLK or S_ARESETN) begin - if (S_ARESETN == 1'b1) begin - bvalid_r <= 0; - end else begin - //external bvalid signal generation - if (bvalid_c == 1'b1) begin - bvalid_r <= #FLOP_DELAY 1'b1 ; - end else if (bvalid_count_r <= 1 && S_AXI_BREADY == 1'b1) begin - bvalid_r <= #FLOP_DELAY 0 ; - end - end - end - end - endgenerate - - //------------------------------------------------------------------------- - // Generation of Bready timeout - //------------------------------------------------------------------------- - always @(bvalid_count_r) begin - // bready_timeout_c generation - if(bvalid_count_r == C_AXI_OS_WR-1) begin - bready_timeout_c <= 1'b1; - end else begin - bready_timeout_c <= 1'b0; - end - end - - //------------------------------------------------------------------------- - // Generation of BID - //------------------------------------------------------------------------- - generate if(C_HAS_AXI_ID == 1) begin:gaxi_bid_gen - - always @(posedge S_ACLK or S_ARESETN) begin - if (S_ARESETN == 1'b1) begin - bvalid_wr_cnt_r <= 0; - bvalid_rd_cnt_r <= 0; - end else begin - // STORE AWID IN AN ARRAY - if(bvalid_c == 1'b1) begin - bvalid_wr_cnt_r <= bvalid_wr_cnt_r + 1; - end - // generate BID FROM AWID ARRAY - bvalid_rd_cnt_r <= #FLOP_DELAY bvalid_rd_cnt_c ; - S_AXI_BID <= axi_bid_array[bvalid_rd_cnt_c]; - end - end - - assign bvalid_rd_cnt_c = (bvalid_r == 1'b1 && S_AXI_BREADY == 1'b1)?bvalid_rd_cnt_r+1:bvalid_rd_cnt_r; - - //------------------------------------------------------------------------- - // Storing AWID for generation of BID - //------------------------------------------------------------------------- - always @(posedge S_ACLK or S_ARESETN) begin - if(S_ARESETN == 1'b1) begin - axi_bid_array[0] = 0; - axi_bid_array[1] = 0; - axi_bid_array[2] = 0; - axi_bid_array[3] = 0; - end else if(aw_ready_r == 1'b1 && S_AXI_AWVALID == 1'b1) begin - axi_bid_array[bvalid_wr_cnt_r] <= S_AXI_AWID; - end - end - - end - endgenerate - - assign S_AXI_BVALID = bvalid_r; - assign S_AXI_AWREADY = aw_ready_r; - - endmodule - -module blk_mem_axi_read_wrapper_beh_v8_4 -# ( - //// AXI Interface related parameters start here - parameter C_INTERFACE_TYPE = 0, - parameter C_AXI_TYPE = 0, - parameter C_AXI_SLAVE_TYPE = 0, - parameter C_MEMORY_TYPE = 0, - parameter C_WRITE_WIDTH_A = 4, - parameter C_WRITE_DEPTH_A = 32, - parameter C_ADDRA_WIDTH = 12, - parameter C_AXI_PIPELINE_STAGES = 0, - parameter C_AXI_ARADDR_WIDTH = 12, - parameter C_HAS_AXI_ID = 0, - parameter C_AXI_ID_WIDTH = 4, - parameter C_ADDRB_WIDTH = 12 - ) - ( - - //// AXI Global Signals - input S_ACLK, - input S_ARESETN, - //// AXI Full/Lite Slave Read (Read side) - input [C_AXI_ARADDR_WIDTH-1:0] S_AXI_ARADDR, - input [7:0] S_AXI_ARLEN, - input [2:0] S_AXI_ARSIZE, - input [1:0] S_AXI_ARBURST, - input S_AXI_ARVALID, - output S_AXI_ARREADY, - output S_AXI_RLAST, - output S_AXI_RVALID, - input S_AXI_RREADY, - input [C_AXI_ID_WIDTH-1:0] S_AXI_ARID, - output reg [C_AXI_ID_WIDTH-1:0] S_AXI_RID = 0, - //// AXI Full/Lite Read Address Signals to BRAM - output [C_ADDRB_WIDTH-1:0] S_AXI_ARADDR_OUT, - output S_AXI_RD_EN - ); - - localparam FLOP_DELAY = 100; // 100 ps - localparam C_RANGE = ((C_WRITE_WIDTH_A == 8)?0: - ((C_WRITE_WIDTH_A==16)?1: - ((C_WRITE_WIDTH_A==32)?2: - ((C_WRITE_WIDTH_A==64)?3: - ((C_WRITE_WIDTH_A==128)?4: - ((C_WRITE_WIDTH_A==256)?5:0)))))); - - - - reg [C_AXI_ID_WIDTH-1:0] ar_id_r=0; - wire addr_en_c; - wire rd_en_c; - wire incr_addr_c; - wire single_trans_c; - wire dec_alen_c; - wire mux_sel_c; - wire r_last_c; - wire r_last_int_c; - wire [C_ADDRB_WIDTH-1 : 0] araddr_out; - - reg [7:0] arlen_int_r=0; - reg [7:0] arlen_cntr=8'h01; - reg [1:0] arburst_int_c=0; - reg [1:0] arburst_int_r=0; - reg [((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)? - C_AXI_ARADDR_WIDTH:C_ADDRA_WIDTH)-1:0] araddr_reg =0; - integer num_of_bytes_c = 0; - integer total_bytes = 0; - integer num_of_bytes_r = 0; - integer wrap_base_addr_r = 0; - integer wrap_boundary_r = 0; - - reg [7:0] arlen_int_c=0; - integer total_bytes_c = 0; - integer wrap_base_addr_c = 0; - integer wrap_boundary_c = 0; - - assign dec_alen_c = incr_addr_c | r_last_int_c; - - - read_netlist_v8_4 - #(.C_AXI_TYPE (1), - .C_ADDRB_WIDTH (C_ADDRB_WIDTH)) - axi_read_fsm ( - .S_AXI_INCR_ADDR(incr_addr_c), - .S_AXI_ADDR_EN(addr_en_c), - .S_AXI_SINGLE_TRANS(single_trans_c), - .S_AXI_MUX_SEL(mux_sel_c), - .S_AXI_R_LAST(r_last_c), - .S_AXI_R_LAST_INT(r_last_int_c), - - //// AXI Global Signals - .S_ACLK(S_ACLK), - .S_ARESETN(S_ARESETN), - //// AXI Full/Lite Slave Read (Read side) - .S_AXI_ARLEN(S_AXI_ARLEN), - .S_AXI_ARVALID(S_AXI_ARVALID), - .S_AXI_ARREADY(S_AXI_ARREADY), - .S_AXI_RLAST(S_AXI_RLAST), - .S_AXI_RVALID(S_AXI_RVALID), - .S_AXI_RREADY(S_AXI_RREADY), - //// AXI Full/Lite Read Address Signals to BRAM - .S_AXI_RD_EN(rd_en_c) - ); - - always@(*) begin - num_of_bytes_c = 2**((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_ARSIZE:0); - total_bytes = (num_of_bytes_r)*(arlen_int_r+1); - wrap_base_addr_r = ((araddr_reg)/(total_bytes==0?1:total_bytes))*(total_bytes); - wrap_boundary_r = wrap_base_addr_r+total_bytes; - - //////// combinatorial from interface - arlen_int_c = (C_AXI_TYPE == 0?0:S_AXI_ARLEN); - total_bytes_c = (num_of_bytes_c)*(arlen_int_c+1); - wrap_base_addr_c = ((S_AXI_ARADDR)/(total_bytes_c==0?1:total_bytes_c))*(total_bytes_c); - wrap_boundary_c = wrap_base_addr_c+total_bytes_c; - - arburst_int_c = ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_ARBURST:1); - end - - ////------------------------------------------------------------------------- - //// BMG address generation - ////------------------------------------------------------------------------- - always @(posedge S_ACLK or S_ARESETN) begin - if (S_ARESETN == 1'b1) begin - araddr_reg <= 0; - arburst_int_r <= 0; - num_of_bytes_r <= 0; - end else begin - if (incr_addr_c == 1'b1 && addr_en_c == 1'b1 && single_trans_c == 1'b0) begin - arburst_int_r <= arburst_int_c; - num_of_bytes_r <= num_of_bytes_c; - if (arburst_int_c == 2'b10) begin - if(S_AXI_ARADDR == (wrap_boundary_c-num_of_bytes_c)) begin - araddr_reg <= wrap_base_addr_c; - end else begin - araddr_reg <= S_AXI_ARADDR + num_of_bytes_c; - end - end else if (arburst_int_c == 2'b01 || arburst_int_c == 2'b11) begin - araddr_reg <= S_AXI_ARADDR + num_of_bytes_c; - end - - end else if (addr_en_c == 1'b1) begin - araddr_reg <= S_AXI_ARADDR; - num_of_bytes_r <= num_of_bytes_c; - arburst_int_r <= arburst_int_c; - end else if (incr_addr_c == 1'b1) begin - if (arburst_int_r == 2'b10) begin - if(araddr_reg == (wrap_boundary_r-num_of_bytes_r)) begin - araddr_reg <= wrap_base_addr_r; - end else begin - araddr_reg <= araddr_reg + num_of_bytes_r; - end - end else if (arburst_int_r == 2'b01 || arburst_int_r == 2'b11) begin - araddr_reg <= araddr_reg + num_of_bytes_r; - end - end - end - end - -assign araddr_out = ((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?araddr_reg[C_AXI_ARADDR_WIDTH-1:C_RANGE]:araddr_reg); - - - ////----------------------------------------------------------------------- - //// Counter to generate r_last_int_c from registered ARLEN - AXI FULL FSM - ////----------------------------------------------------------------------- - always @(posedge S_ACLK or S_ARESETN) begin - if (S_ARESETN == 1'b1) begin - arlen_cntr <= 8'h01; - arlen_int_r <= 0; - end else begin - if (addr_en_c == 1'b1 && dec_alen_c == 1'b1 && single_trans_c == 1'b0) begin - arlen_int_r <= (C_AXI_TYPE == 0?0:S_AXI_ARLEN) ; - arlen_cntr <= S_AXI_ARLEN - 1'b1; - end else if (addr_en_c == 1'b1) begin - arlen_int_r <= (C_AXI_TYPE == 0?0:S_AXI_ARLEN) ; - arlen_cntr <= (C_AXI_TYPE == 0?0:S_AXI_ARLEN) ; - end else if (dec_alen_c == 1'b1) begin - arlen_cntr <= arlen_cntr - 1'b1 ; - end - else begin - arlen_cntr <= arlen_cntr; - end - end - end - - assign r_last_int_c = (arlen_cntr == 0 && S_AXI_RREADY == 1'b1)?1'b1:1'b0; - - - ////------------------------------------------------------------------------ - //// AXI FULL FSM - //// Mux Selection of ARADDR - //// ARADDR is driven out from the read fsm based on the mux_sel_c - //// Based on mux_sel either ARADDR is given out or the latched ARADDR is - //// given out to BRAM - ////------------------------------------------------------------------------ - assign S_AXI_ARADDR_OUT = (mux_sel_c == 1'b0)?((C_AXI_TYPE == 1 && C_AXI_SLAVE_TYPE == 0)?S_AXI_ARADDR[C_AXI_ARADDR_WIDTH-1:C_RANGE]:S_AXI_ARADDR):araddr_out; - - ////------------------------------------------------------------------------ - //// Assign output signals - AXI FULL FSM - ////------------------------------------------------------------------------ - assign S_AXI_RD_EN = rd_en_c; - - generate if (C_HAS_AXI_ID == 1) begin:gaxi_bvalid_id_r - always @(posedge S_ACLK or S_ARESETN) begin - if (S_ARESETN == 1'b1) begin - S_AXI_RID <= 0; - ar_id_r <= 0; - end else begin - if (addr_en_c == 1'b1 && rd_en_c == 1'b1) begin - S_AXI_RID <= S_AXI_ARID; - ar_id_r <= S_AXI_ARID; - end else if (addr_en_c == 1'b1 && rd_en_c == 1'b0) begin - ar_id_r <= S_AXI_ARID; - end else if (rd_en_c == 1'b1) begin - S_AXI_RID <= ar_id_r; - end - end - end - end - endgenerate - -endmodule - -module blk_mem_axi_regs_fwd_v8_4 - #(parameter C_DATA_WIDTH = 8 - )( - input ACLK, - input ARESET, - input S_VALID, - output S_READY, - input [C_DATA_WIDTH-1:0] S_PAYLOAD_DATA, - output M_VALID, - input M_READY, - output reg [C_DATA_WIDTH-1:0] M_PAYLOAD_DATA - ); - - reg [C_DATA_WIDTH-1:0] STORAGE_DATA; - wire S_READY_I; - reg M_VALID_I; - reg [1:0] ARESET_D; - - //assign local signal to its output signal - assign S_READY = S_READY_I; - assign M_VALID = M_VALID_I; - - always @(posedge ACLK) begin - ARESET_D <= {ARESET_D[0], ARESET}; - end - - //Save payload data whenever we have a transaction on the slave side - always @(posedge ACLK or ARESET) begin - if (ARESET == 1'b1) begin - STORAGE_DATA <= 0; - end else begin - if(S_VALID == 1'b1 && S_READY_I == 1'b1 ) begin - STORAGE_DATA <= S_PAYLOAD_DATA; - end - end - end - - always @(posedge ACLK) begin - M_PAYLOAD_DATA = STORAGE_DATA; - end - - //M_Valid set to high when we have a completed transfer on slave side - //Is removed on a M_READY except if we have a new transfer on the slave side - - always @(posedge ACLK or ARESET_D) begin - if (ARESET_D != 2'b00) begin - M_VALID_I <= 1'b0; - end else begin - if (S_VALID == 1'b1) begin - //Always set M_VALID_I when slave side is valid - M_VALID_I <= 1'b1; - end else if (M_READY == 1'b1 ) begin - //Clear (or keep) when no slave side is valid but master side is ready - M_VALID_I <= 1'b0; - end - end - end - - //Slave Ready is either when Master side drives M_READY or we have space in our storage data - assign S_READY_I = (M_READY || (!M_VALID_I)) && !(|(ARESET_D)); - - endmodule - -//***************************************************************************** -// Output Register Stage module -// -// This module builds the output register stages of the memory. This module is -// instantiated in the main memory module (blk_mem_gen_v8_4_4) which is -// declared/implemented further down in this file. -//***************************************************************************** -module blk_mem_gen_v8_4_4_output_stage - #(parameter C_FAMILY = "virtex7", - parameter C_XDEVICEFAMILY = "virtex7", - parameter C_RST_TYPE = "SYNC", - parameter C_HAS_RST = 0, - parameter C_RSTRAM = 0, - parameter C_RST_PRIORITY = "CE", - parameter C_INIT_VAL = "0", - parameter C_HAS_EN = 0, - parameter C_HAS_REGCE = 0, - parameter C_DATA_WIDTH = 32, - parameter C_ADDRB_WIDTH = 10, - parameter C_HAS_MEM_OUTPUT_REGS = 0, - parameter C_USE_SOFTECC = 0, - parameter C_USE_ECC = 0, - parameter NUM_STAGES = 1, - parameter C_EN_ECC_PIPE = 0, - parameter FLOP_DELAY = 100 - ) - ( - input CLK, - input RST, - input EN, - input REGCE, - input [C_DATA_WIDTH-1:0] DIN_I, - output reg [C_DATA_WIDTH-1:0] DOUT, - input SBITERR_IN_I, - input DBITERR_IN_I, - output reg SBITERR, - output reg DBITERR, - input [C_ADDRB_WIDTH-1:0] RDADDRECC_IN_I, - input ECCPIPECE, - output reg [C_ADDRB_WIDTH-1:0] RDADDRECC -); - -//****************************** -// Port and Generic Definitions -//****************************** - ////////////////////////////////////////////////////////////////////////// - // Generic Definitions - ////////////////////////////////////////////////////////////////////////// - // C_FAMILY,C_XDEVICEFAMILY: Designates architecture targeted. The following - // options are available - "spartan3", "spartan6", - // "virtex4", "virtex5", "virtex6" and "virtex6l". - // C_RST_TYPE : Type of reset - Synchronous or Asynchronous - // C_HAS_RST : Determines the presence of the RST port - // C_RSTRAM : Determines if special reset behavior is used - // C_RST_PRIORITY : Determines the priority between CE and SR - // C_INIT_VAL : Initialization value - // C_HAS_EN : Determines the presence of the EN port - // C_HAS_REGCE : Determines the presence of the REGCE port - // C_DATA_WIDTH : Memory write/read width - // C_ADDRB_WIDTH : Width of the ADDRB input port - // C_HAS_MEM_OUTPUT_REGS : Designates the use of a register at the output - // of the RAM primitive - // C_USE_SOFTECC : Determines if the Soft ECC feature is used or - // not. Only applicable Spartan-6 - // C_USE_ECC : Determines if the ECC feature is used or - // not. Only applicable for V5 and V6 - // NUM_STAGES : Determines the number of output stages - // FLOP_DELAY : Constant delay for register assignments - ////////////////////////////////////////////////////////////////////////// - // Port Definitions - ////////////////////////////////////////////////////////////////////////// - // CLK : Clock to synchronize all read and write operations - // RST : Reset input to reset memory outputs to a user-defined - // reset state - // EN : Enable all read and write operations - // REGCE : Register Clock Enable to control each pipeline output - // register stages - // DIN : Data input to the Output stage. - // DOUT : Final Data output - // SBITERR_IN : SBITERR input signal to the Output stage. - // SBITERR : Final SBITERR Output signal. - // DBITERR_IN : DBITERR input signal to the Output stage. - // DBITERR : Final DBITERR Output signal. - // RDADDRECC_IN : RDADDRECC input signal to the Output stage. - // RDADDRECC : Final RDADDRECC Output signal. - ////////////////////////////////////////////////////////////////////////// - -// Fix for CR-509792 - - localparam REG_STAGES = (NUM_STAGES < 2) ? 1 : NUM_STAGES-1; - - // Declare the pipeline registers - // (includes mem output reg, mux pipeline stages, and mux output reg) - reg [C_DATA_WIDTH*REG_STAGES-1:0] out_regs; - reg [C_ADDRB_WIDTH*REG_STAGES-1:0] rdaddrecc_regs; - reg [REG_STAGES-1:0] sbiterr_regs; - reg [REG_STAGES-1:0] dbiterr_regs; - - reg [C_DATA_WIDTH*8-1:0] init_str = C_INIT_VAL; - reg [C_DATA_WIDTH-1:0] init_val ; - - //********************************************* - // Wire off optional inputs based on parameters - //********************************************* - wire en_i; - wire regce_i; - wire rst_i; - - // Internal signals - reg [C_DATA_WIDTH-1:0] DIN; - reg [C_ADDRB_WIDTH-1:0] RDADDRECC_IN; - reg SBITERR_IN; - reg DBITERR_IN; - - - // Internal enable for output registers is tied to user EN or '1' depending - // on parameters - assign en_i = (C_HAS_EN==0 || EN); - - // Internal register enable for output registers is tied to user REGCE, EN or - // '1' depending on parameters - // For V4 ECC, REGCE is always 1 - // Virtex-4 ECC Not Yet Supported - assign regce_i = ((C_HAS_REGCE==1) && REGCE) || - ((C_HAS_REGCE==0) && (C_HAS_EN==0 || EN)); - - //Internal SRR is tied to user RST or '0' depending on parameters - assign rst_i = (C_HAS_RST==1) && RST; - - //**************************************************** - // Power on: load up the output registers and latches - //**************************************************** - initial begin - if (!($sscanf(init_str, "%h", init_val))) begin - init_val = 0; - end - DOUT = init_val; - RDADDRECC = 0; - SBITERR = 1'b0; - DBITERR = 1'b0; - DIN = {(C_DATA_WIDTH){1'b0}}; - RDADDRECC_IN = 0; - SBITERR_IN = 0; - DBITERR_IN = 0; - // This will be one wider than need, but 0 is an error - out_regs = {(REG_STAGES+1){init_val}}; - rdaddrecc_regs = 0; - sbiterr_regs = {(REG_STAGES+1){1'b0}}; - dbiterr_regs = {(REG_STAGES+1){1'b0}}; - end - - //*********************************************** - // NUM_STAGES = 0 (No output registers. RAM only) - //*********************************************** - generate if (NUM_STAGES == 0) begin : zero_stages - always @* begin - DOUT = DIN; - RDADDRECC = RDADDRECC_IN; - SBITERR = SBITERR_IN; - DBITERR = DBITERR_IN; - end - end - endgenerate - - generate if (C_EN_ECC_PIPE == 0) begin : no_ecc_pipe_reg - always @* begin - DIN = DIN_I; - SBITERR_IN = SBITERR_IN_I; - DBITERR_IN = DBITERR_IN_I; - RDADDRECC_IN = RDADDRECC_IN_I; - end - end - endgenerate - - generate if (C_EN_ECC_PIPE == 1) begin : with_ecc_pipe_reg - always @(posedge CLK) begin - if(ECCPIPECE == 1) begin - DIN <= #FLOP_DELAY DIN_I; - SBITERR_IN <= #FLOP_DELAY SBITERR_IN_I; - DBITERR_IN <= #FLOP_DELAY DBITERR_IN_I; - RDADDRECC_IN <= #FLOP_DELAY RDADDRECC_IN_I; - end - end - end - endgenerate - - - //*********************************************** - // NUM_STAGES = 1 - // (Mem Output Reg only or Mux Output Reg only) - //*********************************************** - - // Possible valid combinations: - // Note: C_HAS_MUX_OUTPUT_REGS_*=0 when (C_RSTRAM_*=1) - // +-----------------------------------------+ - // | C_RSTRAM_* | Reset Behavior | - // +----------------+------------------------+ - // | 0 | Normal Behavior | - // +----------------+------------------------+ - // | 1 | Special Behavior | - // +----------------+------------------------+ - // - // Normal = REGCE gates reset, as in the case of all families except S3ADSP. - // Special = EN gates reset, as in the case of S3ADSP. - - generate if (NUM_STAGES == 1 && - (C_RSTRAM == 0 || (C_RSTRAM == 1 && (C_XDEVICEFAMILY != "spartan3adsp" && C_XDEVICEFAMILY != "aspartan3adsp" )) || - C_HAS_MEM_OUTPUT_REGS == 0 || C_HAS_RST == 0)) - begin : one_stages_norm - - always @(posedge CLK) begin - if (C_RST_PRIORITY == "CE") begin //REGCE has priority - if (regce_i && rst_i) begin - DOUT <= #FLOP_DELAY init_val; - RDADDRECC <= #FLOP_DELAY 0; - SBITERR <= #FLOP_DELAY 1'b0; - DBITERR <= #FLOP_DELAY 1'b0; - end else if (regce_i) begin - DOUT <= #FLOP_DELAY DIN; - RDADDRECC <= #FLOP_DELAY RDADDRECC_IN; - SBITERR <= #FLOP_DELAY SBITERR_IN; - DBITERR <= #FLOP_DELAY DBITERR_IN; - end //Output signal assignments - end else begin //RST has priority - if (rst_i) begin - DOUT <= #FLOP_DELAY init_val; - RDADDRECC <= #FLOP_DELAY RDADDRECC_IN; - SBITERR <= #FLOP_DELAY 1'b0; - DBITERR <= #FLOP_DELAY 1'b0; - end else if (regce_i) begin - DOUT <= #FLOP_DELAY DIN; - RDADDRECC <= #FLOP_DELAY RDADDRECC_IN; - SBITERR <= #FLOP_DELAY SBITERR_IN; - DBITERR <= #FLOP_DELAY DBITERR_IN; - end //Output signal assignments - end //end Priority conditions - end //end RST Type conditions - end //end one_stages_norm generate statement - endgenerate - - // Special Reset Behavior for S3ADSP - generate if (NUM_STAGES == 1 && C_RSTRAM == 1 && (C_XDEVICEFAMILY =="spartan3adsp" || C_XDEVICEFAMILY =="aspartan3adsp")) - begin : one_stage_splbhv - always @(posedge CLK) begin - if (en_i && rst_i) begin - DOUT <= #FLOP_DELAY init_val; - end else if (regce_i && !rst_i) begin - DOUT <= #FLOP_DELAY DIN; - end //Output signal assignments - end //end CLK - end //end one_stage_splbhv generate statement - endgenerate - - //************************************************************ - // NUM_STAGES > 1 - // Mem Output Reg + Mux Output Reg - // or - // Mem Output Reg + Mux Pipeline Stages (>0) + Mux Output Reg - // or - // Mux Pipeline Stages (>0) + Mux Output Reg - //************************************************************* - generate if (NUM_STAGES > 1) begin : multi_stage - //Asynchronous Reset - always @(posedge CLK) begin - if (C_RST_PRIORITY == "CE") begin //REGCE has priority - if (regce_i && rst_i) begin - DOUT <= #FLOP_DELAY init_val; - RDADDRECC <= #FLOP_DELAY 0; - SBITERR <= #FLOP_DELAY 1'b0; - DBITERR <= #FLOP_DELAY 1'b0; - end else if (regce_i) begin - DOUT <= #FLOP_DELAY - out_regs[C_DATA_WIDTH*(NUM_STAGES-2)+:C_DATA_WIDTH]; - RDADDRECC <= #FLOP_DELAY rdaddrecc_regs[C_ADDRB_WIDTH*(NUM_STAGES-2)+:C_ADDRB_WIDTH]; - SBITERR <= #FLOP_DELAY sbiterr_regs[NUM_STAGES-2]; - DBITERR <= #FLOP_DELAY dbiterr_regs[NUM_STAGES-2]; - end //Output signal assignments - end else begin //RST has priority - if (rst_i) begin - DOUT <= #FLOP_DELAY init_val; - RDADDRECC <= #FLOP_DELAY 0; - SBITERR <= #FLOP_DELAY 1'b0; - DBITERR <= #FLOP_DELAY 1'b0; - end else if (regce_i) begin - DOUT <= #FLOP_DELAY - out_regs[C_DATA_WIDTH*(NUM_STAGES-2)+:C_DATA_WIDTH]; - RDADDRECC <= #FLOP_DELAY rdaddrecc_regs[C_ADDRB_WIDTH*(NUM_STAGES-2)+:C_ADDRB_WIDTH]; - SBITERR <= #FLOP_DELAY sbiterr_regs[NUM_STAGES-2]; - DBITERR <= #FLOP_DELAY dbiterr_regs[NUM_STAGES-2]; - end //Output signal assignments - end //end Priority conditions - // Shift the data through the output stages - if (en_i) begin - out_regs <= #FLOP_DELAY (out_regs << C_DATA_WIDTH) | DIN; - rdaddrecc_regs <= #FLOP_DELAY (rdaddrecc_regs << C_ADDRB_WIDTH) | RDADDRECC_IN; - sbiterr_regs <= #FLOP_DELAY (sbiterr_regs << 1) | SBITERR_IN; - dbiterr_regs <= #FLOP_DELAY (dbiterr_regs << 1) | DBITERR_IN; - end - end //end CLK - end //end multi_stage generate statement - endgenerate -endmodule - -module blk_mem_gen_v8_4_4_softecc_output_reg_stage - #(parameter C_DATA_WIDTH = 32, - parameter C_ADDRB_WIDTH = 10, - parameter C_HAS_SOFTECC_OUTPUT_REGS_B= 0, - parameter C_USE_SOFTECC = 0, - parameter FLOP_DELAY = 100 - ) - ( - input CLK, - input [C_DATA_WIDTH-1:0] DIN, - output reg [C_DATA_WIDTH-1:0] DOUT, - input SBITERR_IN, - input DBITERR_IN, - output reg SBITERR, - output reg DBITERR, - input [C_ADDRB_WIDTH-1:0] RDADDRECC_IN, - output reg [C_ADDRB_WIDTH-1:0] RDADDRECC -); - -//****************************** -// Port and Generic Definitions -//****************************** - ////////////////////////////////////////////////////////////////////////// - // Generic Definitions - ////////////////////////////////////////////////////////////////////////// - // C_DATA_WIDTH : Memory write/read width - // C_ADDRB_WIDTH : Width of the ADDRB input port - // C_HAS_SOFTECC_OUTPUT_REGS_B : Designates the use of a register at the output - // of the RAM primitive - // C_USE_SOFTECC : Determines if the Soft ECC feature is used or - // not. Only applicable Spartan-6 - // FLOP_DELAY : Constant delay for register assignments - ////////////////////////////////////////////////////////////////////////// - // Port Definitions - ////////////////////////////////////////////////////////////////////////// - // CLK : Clock to synchronize all read and write operations - // DIN : Data input to the Output stage. - // DOUT : Final Data output - // SBITERR_IN : SBITERR input signal to the Output stage. - // SBITERR : Final SBITERR Output signal. - // DBITERR_IN : DBITERR input signal to the Output stage. - // DBITERR : Final DBITERR Output signal. - // RDADDRECC_IN : RDADDRECC input signal to the Output stage. - // RDADDRECC : Final RDADDRECC Output signal. - ////////////////////////////////////////////////////////////////////////// - - reg [C_DATA_WIDTH-1:0] dout_i = 0; - reg sbiterr_i = 0; - reg dbiterr_i = 0; - reg [C_ADDRB_WIDTH-1:0] rdaddrecc_i = 0; - - //*********************************************** - // NO OUTPUT REGISTERS. - //*********************************************** - generate if (C_HAS_SOFTECC_OUTPUT_REGS_B==0) begin : no_output_stage - always @* begin - DOUT = DIN; - RDADDRECC = RDADDRECC_IN; - SBITERR = SBITERR_IN; - DBITERR = DBITERR_IN; - end - end - endgenerate - - //*********************************************** - // WITH OUTPUT REGISTERS. - //*********************************************** - generate if (C_HAS_SOFTECC_OUTPUT_REGS_B==1) begin : has_output_stage - always @(posedge CLK) begin - dout_i <= #FLOP_DELAY DIN; - rdaddrecc_i <= #FLOP_DELAY RDADDRECC_IN; - sbiterr_i <= #FLOP_DELAY SBITERR_IN; - dbiterr_i <= #FLOP_DELAY DBITERR_IN; - end - - always @* begin - DOUT = dout_i; - RDADDRECC = rdaddrecc_i; - SBITERR = sbiterr_i; - DBITERR = dbiterr_i; - end //end always - end //end in_or_out_stage generate statement - endgenerate - -endmodule - - -//***************************************************************************** -// Main Memory module -// -// This module is the top-level behavioral model and this implements the RAM -//***************************************************************************** -module blk_mem_gen_v8_4_4_mem_module - #(parameter C_CORENAME = "blk_mem_gen_v8_4_4", - parameter C_FAMILY = "virtex7", - parameter C_XDEVICEFAMILY = "virtex7", - parameter C_MEM_TYPE = 2, - parameter C_BYTE_SIZE = 9, - parameter C_USE_BRAM_BLOCK = 0, - parameter C_ALGORITHM = 1, - parameter C_PRIM_TYPE = 3, - parameter C_LOAD_INIT_FILE = 0, - parameter C_INIT_FILE_NAME = "", - parameter C_INIT_FILE = "", - parameter C_USE_DEFAULT_DATA = 0, - parameter C_DEFAULT_DATA = "0", - parameter C_RST_TYPE = "SYNC", - parameter C_HAS_RSTA = 0, - parameter C_RST_PRIORITY_A = "CE", - parameter C_RSTRAM_A = 0, - parameter C_INITA_VAL = "0", - parameter C_HAS_ENA = 1, - parameter C_HAS_REGCEA = 0, - parameter C_USE_BYTE_WEA = 0, - parameter C_WEA_WIDTH = 1, - parameter C_WRITE_MODE_A = "WRITE_FIRST", - parameter C_WRITE_WIDTH_A = 32, - parameter C_READ_WIDTH_A = 32, - parameter C_WRITE_DEPTH_A = 64, - parameter C_READ_DEPTH_A = 64, - parameter C_ADDRA_WIDTH = 5, - parameter C_HAS_RSTB = 0, - parameter C_RST_PRIORITY_B = "CE", - parameter C_RSTRAM_B = 0, - parameter C_INITB_VAL = "", - parameter C_HAS_ENB = 1, - parameter C_HAS_REGCEB = 0, - parameter C_USE_BYTE_WEB = 0, - parameter C_WEB_WIDTH = 1, - parameter C_WRITE_MODE_B = "WRITE_FIRST", - parameter C_WRITE_WIDTH_B = 32, - parameter C_READ_WIDTH_B = 32, - parameter C_WRITE_DEPTH_B = 64, - parameter C_READ_DEPTH_B = 64, - parameter C_ADDRB_WIDTH = 5, - parameter C_HAS_MEM_OUTPUT_REGS_A = 0, - parameter C_HAS_MEM_OUTPUT_REGS_B = 0, - parameter C_HAS_MUX_OUTPUT_REGS_A = 0, - parameter C_HAS_MUX_OUTPUT_REGS_B = 0, - parameter C_HAS_SOFTECC_INPUT_REGS_A = 0, - parameter C_HAS_SOFTECC_OUTPUT_REGS_B= 0, - parameter C_MUX_PIPELINE_STAGES = 0, - parameter C_USE_SOFTECC = 0, - parameter C_USE_ECC = 0, - parameter C_HAS_INJECTERR = 0, - parameter C_SIM_COLLISION_CHECK = "NONE", - parameter C_COMMON_CLK = 1, - parameter FLOP_DELAY = 100, - parameter C_DISABLE_WARN_BHV_COLL = 0, - parameter C_EN_ECC_PIPE = 0, - parameter C_DISABLE_WARN_BHV_RANGE = 0 - ) - (input CLKA, - input RSTA, - input ENA, - input REGCEA, - input [C_WEA_WIDTH-1:0] WEA, - input [C_ADDRA_WIDTH-1:0] ADDRA, - input [C_WRITE_WIDTH_A-1:0] DINA, - output [C_READ_WIDTH_A-1:0] DOUTA, - input CLKB, - input RSTB, - input ENB, - input REGCEB, - input [C_WEB_WIDTH-1:0] WEB, - input [C_ADDRB_WIDTH-1:0] ADDRB, - input [C_WRITE_WIDTH_B-1:0] DINB, - output [C_READ_WIDTH_B-1:0] DOUTB, - input INJECTSBITERR, - input INJECTDBITERR, - input ECCPIPECE, - input SLEEP, - output SBITERR, - output DBITERR, - output [C_ADDRB_WIDTH-1:0] RDADDRECC - ); -//****************************** -// Port and Generic Definitions -//****************************** - ////////////////////////////////////////////////////////////////////////// - // Generic Definitions - ////////////////////////////////////////////////////////////////////////// - // C_CORENAME : Instance name of the Block Memory Generator core - // C_FAMILY,C_XDEVICEFAMILY: Designates architecture targeted. The following - // options are available - "spartan3", "spartan6", - // "virtex4", "virtex5", "virtex6" and "virtex6l". - // C_MEM_TYPE : Designates memory type. - // It can be - // 0 - Single Port Memory - // 1 - Simple Dual Port Memory - // 2 - True Dual Port Memory - // 3 - Single Port Read Only Memory - // 4 - Dual Port Read Only Memory - // C_BYTE_SIZE : Size of a byte (8 or 9 bits) - // C_ALGORITHM : Designates the algorithm method used - // for constructing the memory. - // It can be Fixed_Primitives, Minimum_Area or - // Low_Power - // C_PRIM_TYPE : Designates the user selected primitive used to - // construct the memory. - // - // C_LOAD_INIT_FILE : Designates the use of an initialization file to - // initialize memory contents. - // C_INIT_FILE_NAME : Memory initialization file name. - // C_USE_DEFAULT_DATA : Designates whether to fill remaining - // initialization space with default data - // C_DEFAULT_DATA : Default value of all memory locations - // not initialized by the memory - // initialization file. - // C_RST_TYPE : Type of reset - Synchronous or Asynchronous - // C_HAS_RSTA : Determines the presence of the RSTA port - // C_RST_PRIORITY_A : Determines the priority between CE and SR for - // Port A. - // C_RSTRAM_A : Determines if special reset behavior is used for - // Port A - // C_INITA_VAL : The initialization value for Port A - // C_HAS_ENA : Determines the presence of the ENA port - // C_HAS_REGCEA : Determines the presence of the REGCEA port - // C_USE_BYTE_WEA : Determines if the Byte Write is used or not. - // C_WEA_WIDTH : The width of the WEA port - // C_WRITE_MODE_A : Configurable write mode for Port A. It can be - // WRITE_FIRST, READ_FIRST or NO_CHANGE. - // C_WRITE_WIDTH_A : Memory write width for Port A. - // C_READ_WIDTH_A : Memory read width for Port A. - // C_WRITE_DEPTH_A : Memory write depth for Port A. - // C_READ_DEPTH_A : Memory read depth for Port A. - // C_ADDRA_WIDTH : Width of the ADDRA input port - // C_HAS_RSTB : Determines the presence of the RSTB port - // C_RST_PRIORITY_B : Determines the priority between CE and SR for - // Port B. - // C_RSTRAM_B : Determines if special reset behavior is used for - // Port B - // C_INITB_VAL : The initialization value for Port B - // C_HAS_ENB : Determines the presence of the ENB port - // C_HAS_REGCEB : Determines the presence of the REGCEB port - // C_USE_BYTE_WEB : Determines if the Byte Write is used or not. - // C_WEB_WIDTH : The width of the WEB port - // C_WRITE_MODE_B : Configurable write mode for Port B. It can be - // WRITE_FIRST, READ_FIRST or NO_CHANGE. - // C_WRITE_WIDTH_B : Memory write width for Port B. - // C_READ_WIDTH_B : Memory read width for Port B. - // C_WRITE_DEPTH_B : Memory write depth for Port B. - // C_READ_DEPTH_B : Memory read depth for Port B. - // C_ADDRB_WIDTH : Width of the ADDRB input port - // C_HAS_MEM_OUTPUT_REGS_A : Designates the use of a register at the output - // of the RAM primitive for Port A. - // C_HAS_MEM_OUTPUT_REGS_B : Designates the use of a register at the output - // of the RAM primitive for Port B. - // C_HAS_MUX_OUTPUT_REGS_A : Designates the use of a register at the output - // of the MUX for Port A. - // C_HAS_MUX_OUTPUT_REGS_B : Designates the use of a register at the output - // of the MUX for Port B. - // C_MUX_PIPELINE_STAGES : Designates the number of pipeline stages in - // between the muxes. - // C_USE_SOFTECC : Determines if the Soft ECC feature is used or - // not. Only applicable Spartan-6 - // C_USE_ECC : Determines if the ECC feature is used or - // not. Only applicable for V5 and V6 - // C_HAS_INJECTERR : Determines if the error injection pins - // are present or not. If the ECC feature - // is not used, this value is defaulted to - // 0, else the following are the allowed - // values: - // 0 : No INJECTSBITERR or INJECTDBITERR pins - // 1 : Only INJECTSBITERR pin exists - // 2 : Only INJECTDBITERR pin exists - // 3 : Both INJECTSBITERR and INJECTDBITERR pins exist - // C_SIM_COLLISION_CHECK : Controls the disabling of Unisim model collision - // warnings. It can be "ALL", "NONE", - // "Warnings_Only" or "Generate_X_Only". - // C_COMMON_CLK : Determins if the core has a single CLK input. - // C_DISABLE_WARN_BHV_COLL : Controls the Behavioral Model Collision warnings - // C_DISABLE_WARN_BHV_RANGE: Controls the Behavioral Model Out of Range - // warnings - ////////////////////////////////////////////////////////////////////////// - // Port Definitions - ////////////////////////////////////////////////////////////////////////// - // CLKA : Clock to synchronize all read and write operations of Port A. - // RSTA : Reset input to reset memory outputs to a user-defined - // reset state for Port A. - // ENA : Enable all read and write operations of Port A. - // REGCEA : Register Clock Enable to control each pipeline output - // register stages for Port A. - // WEA : Write Enable to enable all write operations of Port A. - // ADDRA : Address of Port A. - // DINA : Data input of Port A. - // DOUTA : Data output of Port A. - // CLKB : Clock to synchronize all read and write operations of Port B. - // RSTB : Reset input to reset memory outputs to a user-defined - // reset state for Port B. - // ENB : Enable all read and write operations of Port B. - // REGCEB : Register Clock Enable to control each pipeline output - // register stages for Port B. - // WEB : Write Enable to enable all write operations of Port B. - // ADDRB : Address of Port B. - // DINB : Data input of Port B. - // DOUTB : Data output of Port B. - // INJECTSBITERR : Single Bit ECC Error Injection Pin. - // INJECTDBITERR : Double Bit ECC Error Injection Pin. - // SBITERR : Output signal indicating that a Single Bit ECC Error has been - // detected and corrected. - // DBITERR : Output signal indicating that a Double Bit ECC Error has been - // detected. - // RDADDRECC : Read Address Output signal indicating address at which an - // ECC error has occurred. - ////////////////////////////////////////////////////////////////////////// - - -// Note: C_CORENAME parameter is hard-coded to "blk_mem_gen_v8_4_4" and it is -// only used by this module to print warning messages. It is neither passed -// down from blk_mem_gen_v8_4_4_xst.v nor present in the instantiation template -// coregen generates - - //*************************************************************************** - // constants for the core behavior - //*************************************************************************** - // file handles for logging - //-------------------------------------------------- - localparam ADDRFILE = 32'h8000_0001; //stdout for addr out of range - localparam COLLFILE = 32'h8000_0001; //stdout for coll detection - localparam ERRFILE = 32'h8000_0001; //stdout for file I/O errors - - // other constants - //-------------------------------------------------- - localparam COLL_DELAY = 100; // 100 ps - - // locally derived parameters to determine memory shape - //----------------------------------------------------- - - localparam CHKBIT_WIDTH = (C_WRITE_WIDTH_A>57 ? 8 : (C_WRITE_WIDTH_A>26 ? 7 : (C_WRITE_WIDTH_A>11 ? 6 : (C_WRITE_WIDTH_A>4 ? 5 : (C_WRITE_WIDTH_A<5 ? 4 :0))))); - - localparam MIN_WIDTH_A = (C_WRITE_WIDTH_A < C_READ_WIDTH_A) ? - C_WRITE_WIDTH_A : C_READ_WIDTH_A; - localparam MIN_WIDTH_B = (C_WRITE_WIDTH_B < C_READ_WIDTH_B) ? - C_WRITE_WIDTH_B : C_READ_WIDTH_B; - localparam MIN_WIDTH = (MIN_WIDTH_A < MIN_WIDTH_B) ? - MIN_WIDTH_A : MIN_WIDTH_B; - - localparam MAX_DEPTH_A = (C_WRITE_DEPTH_A > C_READ_DEPTH_A) ? - C_WRITE_DEPTH_A : C_READ_DEPTH_A; - localparam MAX_DEPTH_B = (C_WRITE_DEPTH_B > C_READ_DEPTH_B) ? - C_WRITE_DEPTH_B : C_READ_DEPTH_B; - localparam MAX_DEPTH = (MAX_DEPTH_A > MAX_DEPTH_B) ? - MAX_DEPTH_A : MAX_DEPTH_B; - - - // locally derived parameters to assist memory access - //---------------------------------------------------- - // Calculate the width ratios of each port with respect to the narrowest - // port - localparam WRITE_WIDTH_RATIO_A = C_WRITE_WIDTH_A/MIN_WIDTH; - localparam READ_WIDTH_RATIO_A = C_READ_WIDTH_A/MIN_WIDTH; - localparam WRITE_WIDTH_RATIO_B = C_WRITE_WIDTH_B/MIN_WIDTH; - localparam READ_WIDTH_RATIO_B = C_READ_WIDTH_B/MIN_WIDTH; - - // To modify the LSBs of the 'wider' data to the actual - // address value - //---------------------------------------------------- - localparam WRITE_ADDR_A_DIV = C_WRITE_WIDTH_A/MIN_WIDTH_A; - localparam READ_ADDR_A_DIV = C_READ_WIDTH_A/MIN_WIDTH_A; - localparam WRITE_ADDR_B_DIV = C_WRITE_WIDTH_B/MIN_WIDTH_B; - localparam READ_ADDR_B_DIV = C_READ_WIDTH_B/MIN_WIDTH_B; - - // If byte writes aren't being used, make sure BYTE_SIZE is not - // wider than the memory elements to avoid compilation warnings - localparam BYTE_SIZE = (C_BYTE_SIZE < MIN_WIDTH) ? C_BYTE_SIZE : MIN_WIDTH; - - // The memory - reg [MIN_WIDTH-1:0] memory [0:MAX_DEPTH-1]; - reg [MIN_WIDTH-1:0] temp_mem_array [0:MAX_DEPTH-1]; - reg [C_WRITE_WIDTH_A+CHKBIT_WIDTH-1:0] doublebit_error = 3; - // ECC error arrays - reg sbiterr_arr [0:MAX_DEPTH-1]; - reg dbiterr_arr [0:MAX_DEPTH-1]; - - reg softecc_sbiterr_arr [0:MAX_DEPTH-1]; - reg softecc_dbiterr_arr [0:MAX_DEPTH-1]; - // Memory output 'latches' - reg [C_READ_WIDTH_A-1:0] memory_out_a; - reg [C_READ_WIDTH_B-1:0] memory_out_b; - - // ECC error inputs and outputs from output_stage module: - reg sbiterr_in; - wire sbiterr_sdp; - reg dbiterr_in; - wire dbiterr_sdp; - - wire [C_READ_WIDTH_B-1:0] dout_i; - wire dbiterr_i; - wire sbiterr_i; - wire [C_ADDRB_WIDTH-1:0] rdaddrecc_i; - - reg [C_ADDRB_WIDTH-1:0] rdaddrecc_in; - wire [C_ADDRB_WIDTH-1:0] rdaddrecc_sdp; - - // Reset values - reg [C_READ_WIDTH_A-1:0] inita_val; - reg [C_READ_WIDTH_B-1:0] initb_val; - - // Collision detect - reg is_collision; - reg is_collision_a, is_collision_delay_a; - reg is_collision_b, is_collision_delay_b; - - // Temporary variables for initialization - //--------------------------------------- - integer status; - integer initfile; - integer meminitfile; - // data input buffer - reg [C_WRITE_WIDTH_A-1:0] mif_data; - reg [C_WRITE_WIDTH_A-1:0] mem_data; - // string values in hex - reg [C_READ_WIDTH_A*8-1:0] inita_str = C_INITA_VAL; - reg [C_READ_WIDTH_B*8-1:0] initb_str = C_INITB_VAL; - reg [C_WRITE_WIDTH_A*8-1:0] default_data_str = C_DEFAULT_DATA; - // initialization filename - reg [1023*8-1:0] init_file_str = C_INIT_FILE_NAME; - reg [1023*8-1:0] mem_init_file_str = C_INIT_FILE; - - - //Constants used to calculate the effective address widths for each of the - //four ports. - integer cnt = 1; - integer write_addr_a_width, read_addr_a_width; - integer write_addr_b_width, read_addr_b_width; - - localparam C_FAMILY_LOCALPARAM = (C_FAMILY=="virtexuplushbm"?"virtex7":(C_FAMILY=="zynquplusrfsoc"?"virtex7":(C_FAMILY=="zynquplus"?"virtex7":(C_FAMILY=="kintexuplus"?"virtex7":(C_FAMILY=="virtexuplus"?"virtex7":(C_FAMILY=="virtexu"?"virtex7":(C_FAMILY=="kintexu" ? "virtex7":(C_FAMILY=="virtex7" ? "virtex7" : (C_FAMILY=="virtex7l" ? "virtex7" : (C_FAMILY=="qvirtex7" ? "virtex7" : (C_FAMILY=="qvirtex7l" ? "virtex7" : (C_FAMILY=="kintex7" ? "virtex7" : (C_FAMILY=="kintex7l" ? "virtex7" : (C_FAMILY=="qkintex7" ? "virtex7" : (C_FAMILY=="qkintex7l" ? "virtex7" : (C_FAMILY=="artix7" ? "virtex7" : (C_FAMILY=="artix7l" ? "virtex7" : (C_FAMILY=="qartix7" ? "virtex7" : (C_FAMILY=="qartix7l" ? "virtex7" : (C_FAMILY=="aartix7" ? "virtex7" : (C_FAMILY=="zynq" ? "virtex7" : (C_FAMILY=="azynq" ? "virtex7" : (C_FAMILY=="qzynq" ? "virtex7" : C_FAMILY))))))))))))))))))))))); - - // Internal configuration parameters - //--------------------------------------------- - localparam SINGLE_PORT = (C_MEM_TYPE==0 || C_MEM_TYPE==3); - localparam IS_ROM = (C_MEM_TYPE==3 || C_MEM_TYPE==4); - localparam HAS_A_WRITE = (!IS_ROM); - localparam HAS_B_WRITE = (C_MEM_TYPE==2); - localparam HAS_A_READ = (C_MEM_TYPE!=1); - localparam HAS_B_READ = (!SINGLE_PORT); - localparam HAS_B_PORT = (HAS_B_READ || HAS_B_WRITE); - - // Calculate the mux pipeline register stages for Port A and Port B - //------------------------------------------------------------------ - localparam MUX_PIPELINE_STAGES_A = (C_HAS_MUX_OUTPUT_REGS_A) ? - C_MUX_PIPELINE_STAGES : 0; - localparam MUX_PIPELINE_STAGES_B = (C_HAS_MUX_OUTPUT_REGS_B) ? - C_MUX_PIPELINE_STAGES : 0; - - // Calculate total number of register stages in the core - // ----------------------------------------------------- - localparam NUM_OUTPUT_STAGES_A = (C_HAS_MEM_OUTPUT_REGS_A+MUX_PIPELINE_STAGES_A+C_HAS_MUX_OUTPUT_REGS_A); - - localparam NUM_OUTPUT_STAGES_B = (C_HAS_MEM_OUTPUT_REGS_B+MUX_PIPELINE_STAGES_B+C_HAS_MUX_OUTPUT_REGS_B); - - wire ena_i; - wire enb_i; - wire reseta_i; - wire resetb_i; - wire [C_WEA_WIDTH-1:0] wea_i; - wire [C_WEB_WIDTH-1:0] web_i; - wire rea_i; - wire reb_i; - wire rsta_outp_stage; - wire rstb_outp_stage; - // ECC SBITERR/DBITERR Outputs - // The ECC Behavior is modeled by the behavioral models only for Virtex-6. - // For Virtex-5, these outputs will be tied to 0. - assign SBITERR = ((C_MEM_TYPE == 1 && C_USE_ECC == 1) || C_USE_SOFTECC == 1)?sbiterr_sdp:0; - assign DBITERR = ((C_MEM_TYPE == 1 && C_USE_ECC == 1) || C_USE_SOFTECC == 1)?dbiterr_sdp:0; - assign RDADDRECC = (((C_FAMILY_LOCALPARAM == "virtex7") && C_MEM_TYPE == 1 && C_USE_ECC == 1) || C_USE_SOFTECC == 1)?rdaddrecc_sdp:0; - - - // This effectively wires off optional inputs - assign ena_i = (C_HAS_ENA==0) || ENA; - assign enb_i = ((C_HAS_ENB==0) || ENB) && HAS_B_PORT; - // To match RTL : In RTL, write enable of the primitive is tied to all 1's and - // the enable of the primitive is ANDing of wea(0) and ena. so eventually, the - // write operation depends on both enable and write enable. So, the below code - // which is actually doing the write operation only on enable ignoring the wea - // is removed to be in consistent with RTL. - // To Fix CR855535 (The fix to this CR is reverted to match RTL) - //assign wea_i = (HAS_A_WRITE == 1 && C_MEM_TYPE == 1 &&C_USE_ECC == 1 && C_HAS_ENA == 1 && ENA == 1) ? 'b1 :(HAS_A_WRITE == 1 && C_MEM_TYPE == 1 &&C_USE_ECC == 1 && C_HAS_ENA == 0) ? WEA : (HAS_A_WRITE && ena_i && C_USE_ECC == 0) ? WEA : 'b0; - assign wea_i = (HAS_A_WRITE && ena_i) ? WEA : 'b0; - assign web_i = (HAS_B_WRITE && enb_i) ? WEB : 'b0; - assign rea_i = (HAS_A_READ) ? ena_i : 'b0; - assign reb_i = (HAS_B_READ) ? enb_i : 'b0; - - // These signals reset the memory latches - - assign reseta_i = - ((C_HAS_RSTA==1 && RSTA && NUM_OUTPUT_STAGES_A==0) || - (C_HAS_RSTA==1 && RSTA && C_RSTRAM_A==1)); - - assign resetb_i = - ((C_HAS_RSTB==1 && RSTB && NUM_OUTPUT_STAGES_B==0) || - (C_HAS_RSTB==1 && RSTB && C_RSTRAM_B==1)); - - // Tasks to access the memory - //--------------------------- - //************** - // write_a - //************** - task write_a - (input reg [C_ADDRA_WIDTH-1:0] addr, - input reg [C_WEA_WIDTH-1:0] byte_en, - input reg [C_WRITE_WIDTH_A-1:0] data, - input inj_sbiterr, - input inj_dbiterr); - reg [C_WRITE_WIDTH_A-1:0] current_contents; - reg [C_ADDRA_WIDTH-1:0] address; - integer i; - begin - // Shift the address by the ratio - address = (addr/WRITE_ADDR_A_DIV); - if (address >= C_WRITE_DEPTH_A) begin - if (!C_DISABLE_WARN_BHV_RANGE) begin - $fdisplay(ADDRFILE, - "%0s WARNING: Address %0h is outside range for A Write", - C_CORENAME, addr); - end - - // valid address - end else begin - - // Combine w/ byte writes - if (C_USE_BYTE_WEA) begin - - // Get the current memory contents - if (WRITE_WIDTH_RATIO_A == 1) begin - // Workaround for IUS 5.5 part-select issue - current_contents = memory[address]; - end else begin - for (i = 0; i < WRITE_WIDTH_RATIO_A; i = i + 1) begin - current_contents[MIN_WIDTH*i+:MIN_WIDTH] - = memory[address*WRITE_WIDTH_RATIO_A + i]; - end - end - - // Apply incoming bytes - if (C_WEA_WIDTH == 1) begin - // Workaround for IUS 5.5 part-select issue - if (byte_en[0]) begin - current_contents = data; - end - end else begin - for (i = 0; i < C_WEA_WIDTH; i = i + 1) begin - if (byte_en[i]) begin - current_contents[BYTE_SIZE*i+:BYTE_SIZE] - = data[BYTE_SIZE*i+:BYTE_SIZE]; - end - end - end - - // No byte-writes, overwrite the whole word - end else begin - current_contents = data; - end - - // Insert double bit errors: - if (C_USE_ECC == 1) begin - if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin -// Modified for Implementing CR_859399 - current_contents[0] = !(current_contents[30]); - current_contents[1] = !(current_contents[62]); - - /*current_contents[0] = !(current_contents[0]); - current_contents[1] = !(current_contents[1]);*/ - end - end - - // Insert softecc double bit errors: - if (C_USE_SOFTECC == 1) begin - if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin - doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-1:2] = doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-3:0]; - doublebit_error[0] = doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-1]; - doublebit_error[1] = doublebit_error[C_WRITE_WIDTH_A+CHKBIT_WIDTH-2]; - current_contents = current_contents ^ doublebit_error[C_WRITE_WIDTH_A-1:0]; - end - end - - // Write data to memory - if (WRITE_WIDTH_RATIO_A == 1) begin - // Workaround for IUS 5.5 part-select issue - memory[address*WRITE_WIDTH_RATIO_A] = current_contents; - end else begin - for (i = 0; i < WRITE_WIDTH_RATIO_A; i = i + 1) begin - memory[address*WRITE_WIDTH_RATIO_A + i] - = current_contents[MIN_WIDTH*i+:MIN_WIDTH]; - end - end - - // Store the address at which error is injected: - if ((C_FAMILY_LOCALPARAM == "virtex7") && C_USE_ECC == 1) begin - if ((C_HAS_INJECTERR == 1 && inj_sbiterr == 1'b1) || - (C_HAS_INJECTERR == 3 && inj_sbiterr == 1'b1 && inj_dbiterr != 1'b1)) - begin - sbiterr_arr[addr] = 1; - end else begin - sbiterr_arr[addr] = 0; - end - - if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin - dbiterr_arr[addr] = 1; - end else begin - dbiterr_arr[addr] = 0; - end - end - - // Store the address at which softecc error is injected: - if (C_USE_SOFTECC == 1) begin - if ((C_HAS_INJECTERR == 1 && inj_sbiterr == 1'b1) || - (C_HAS_INJECTERR == 3 && inj_sbiterr == 1'b1 && inj_dbiterr != 1'b1)) - begin - softecc_sbiterr_arr[addr] = 1; - end else begin - softecc_sbiterr_arr[addr] = 0; - end - - if ((C_HAS_INJECTERR == 2 || C_HAS_INJECTERR == 3) && inj_dbiterr == 1'b1) begin - softecc_dbiterr_arr[addr] = 1; - end else begin - softecc_dbiterr_arr[addr] = 0; - end - end - - end - end - endtask - - //************** - // write_b - //************** - task write_b - (input reg [C_ADDRB_WIDTH-1:0] addr, - input reg [C_WEB_WIDTH-1:0] byte_en, - input reg [C_WRITE_WIDTH_B-1:0] data); - reg [C_WRITE_WIDTH_B-1:0] current_contents; - reg [C_ADDRB_WIDTH-1:0] address; - integer i; - begin - // Shift the address by the ratio - address = (addr/WRITE_ADDR_B_DIV); - if (address >= C_WRITE_DEPTH_B) begin - if (!C_DISABLE_WARN_BHV_RANGE) begin - $fdisplay(ADDRFILE, - "%0s WARNING: Address %0h is outside range for B Write", - C_CORENAME, addr); - end - - // valid address - end else begin - - // Combine w/ byte writes - if (C_USE_BYTE_WEB) begin - - // Get the current memory contents - if (WRITE_WIDTH_RATIO_B == 1) begin - // Workaround for IUS 5.5 part-select issue - current_contents = memory[address]; - end else begin - for (i = 0; i < WRITE_WIDTH_RATIO_B; i = i + 1) begin - current_contents[MIN_WIDTH*i+:MIN_WIDTH] - = memory[address*WRITE_WIDTH_RATIO_B + i]; - end - end - - // Apply incoming bytes - if (C_WEB_WIDTH == 1) begin - // Workaround for IUS 5.5 part-select issue - if (byte_en[0]) begin - current_contents = data; - end - end else begin - for (i = 0; i < C_WEB_WIDTH; i = i + 1) begin - if (byte_en[i]) begin - current_contents[BYTE_SIZE*i+:BYTE_SIZE] - = data[BYTE_SIZE*i+:BYTE_SIZE]; - end - end - end - - // No byte-writes, overwrite the whole word - end else begin - current_contents = data; - end - - // Write data to memory - if (WRITE_WIDTH_RATIO_B == 1) begin - // Workaround for IUS 5.5 part-select issue - memory[address*WRITE_WIDTH_RATIO_B] = current_contents; - end else begin - for (i = 0; i < WRITE_WIDTH_RATIO_B; i = i + 1) begin - memory[address*WRITE_WIDTH_RATIO_B + i] - = current_contents[MIN_WIDTH*i+:MIN_WIDTH]; - end - end - end - end - endtask - - //************** - // read_a - //************** - task read_a - (input reg [C_ADDRA_WIDTH-1:0] addr, - input reg reset); - reg [C_ADDRA_WIDTH-1:0] address; - integer i; - begin - - if (reset) begin - memory_out_a <= #FLOP_DELAY inita_val; - end else begin - // Shift the address by the ratio - address = (addr/READ_ADDR_A_DIV); - if (address >= C_READ_DEPTH_A) begin - if (!C_DISABLE_WARN_BHV_RANGE) begin - $fdisplay(ADDRFILE, - "%0s WARNING: Address %0h is outside range for A Read", - C_CORENAME, addr); - end - memory_out_a <= #FLOP_DELAY 'bX; - // valid address - end else begin - if (READ_WIDTH_RATIO_A==1) begin - memory_out_a <= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_A]; - end else begin - // Increment through the 'partial' words in the memory - for (i = 0; i < READ_WIDTH_RATIO_A; i = i + 1) begin - memory_out_a[MIN_WIDTH*i+:MIN_WIDTH] - <= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_A + i]; - end - end //end READ_WIDTH_RATIO_A==1 loop - - end //end valid address loop - end //end reset-data assignment loops - end - endtask - - //************** - // read_b - //************** - task read_b - (input reg [C_ADDRB_WIDTH-1:0] addr, - input reg reset); - reg [C_ADDRB_WIDTH-1:0] address; - integer i; - begin - - if (reset) begin - memory_out_b <= #FLOP_DELAY initb_val; - sbiterr_in <= #FLOP_DELAY 1'b0; - dbiterr_in <= #FLOP_DELAY 1'b0; - rdaddrecc_in <= #FLOP_DELAY 0; - end else begin - // Shift the address - address = (addr/READ_ADDR_B_DIV); - if (address >= C_READ_DEPTH_B) begin - if (!C_DISABLE_WARN_BHV_RANGE) begin - $fdisplay(ADDRFILE, - "%0s WARNING: Address %0h is outside range for B Read", - C_CORENAME, addr); - end - memory_out_b <= #FLOP_DELAY 'bX; - sbiterr_in <= #FLOP_DELAY 1'bX; - dbiterr_in <= #FLOP_DELAY 1'bX; - rdaddrecc_in <= #FLOP_DELAY 'bX; - // valid address - end else begin - if (READ_WIDTH_RATIO_B==1) begin - memory_out_b <= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_B]; - end else begin - // Increment through the 'partial' words in the memory - for (i = 0; i < READ_WIDTH_RATIO_B; i = i + 1) begin - memory_out_b[MIN_WIDTH*i+:MIN_WIDTH] - <= #FLOP_DELAY memory[address*READ_WIDTH_RATIO_B + i]; - end - end - - if ((C_FAMILY_LOCALPARAM == "virtex7") && C_USE_ECC == 1) begin - rdaddrecc_in <= #FLOP_DELAY addr; - if (sbiterr_arr[addr] == 1) begin - sbiterr_in <= #FLOP_DELAY 1'b1; - end else begin - sbiterr_in <= #FLOP_DELAY 1'b0; - end - - if (dbiterr_arr[addr] == 1) begin - dbiterr_in <= #FLOP_DELAY 1'b1; - end else begin - dbiterr_in <= #FLOP_DELAY 1'b0; - end - - end else if (C_USE_SOFTECC == 1) begin - rdaddrecc_in <= #FLOP_DELAY addr; - if (softecc_sbiterr_arr[addr] == 1) begin - sbiterr_in <= #FLOP_DELAY 1'b1; - end else begin - sbiterr_in <= #FLOP_DELAY 1'b0; - end - - if (softecc_dbiterr_arr[addr] == 1) begin - dbiterr_in <= #FLOP_DELAY 1'b1; - end else begin - dbiterr_in <= #FLOP_DELAY 1'b0; - end - end else begin - rdaddrecc_in <= #FLOP_DELAY 0; - dbiterr_in <= #FLOP_DELAY 1'b0; - sbiterr_in <= #FLOP_DELAY 1'b0; - end //end SOFTECC Loop - end //end Valid address loop - end //end reset-data assignment loops - end - endtask - - //************** - // reset_a - //************** - task reset_a (input reg reset); - begin - if (reset) memory_out_a <= #FLOP_DELAY inita_val; - end - endtask - - //************** - // reset_b - //************** - task reset_b (input reg reset); - begin - if (reset) memory_out_b <= #FLOP_DELAY initb_val; - end - endtask - - //************** - // init_memory - //************** - task init_memory; - integer i, j, addr_step; - integer status; - reg [C_WRITE_WIDTH_A-1:0] default_data; - begin - default_data = 0; - - //Display output message indicating that the behavioral model is being - //initialized - if (C_USE_DEFAULT_DATA || C_LOAD_INIT_FILE) $display(" Block Memory Generator module loading initial data..."); - - // Convert the default to hex - if (C_USE_DEFAULT_DATA) begin - if (default_data_str == "") begin - $fdisplay(ERRFILE, "%0s ERROR: C_DEFAULT_DATA is empty!", C_CORENAME); - $finish; - end else begin - status = $sscanf(default_data_str, "%h", default_data); - if (status == 0) begin - $fdisplay(ERRFILE, {"%0s ERROR: Unsuccessful hexadecimal read", - "from C_DEFAULT_DATA: %0s"}, - C_CORENAME, C_DEFAULT_DATA); - $finish; - end - end - end - - // Step by WRITE_ADDR_A_DIV through the memory via the - // Port A write interface to hit every location once - addr_step = WRITE_ADDR_A_DIV; - - // 'write' to every location with default (or 0) - for (i = 0; i < C_WRITE_DEPTH_A*addr_step; i = i + addr_step) begin - write_a(i, {C_WEA_WIDTH{1'b1}}, default_data, 1'b0, 1'b0); - end - - // Get specialized data from the MIF file - if (C_LOAD_INIT_FILE) begin - if (init_file_str == "") begin - $fdisplay(ERRFILE, "%0s ERROR: C_INIT_FILE_NAME is empty!", - C_CORENAME); - $finish; - end else begin - initfile = $fopen(init_file_str, "r"); - if (initfile == 0) begin - $fdisplay(ERRFILE, {"%0s, ERROR: Problem opening", - "C_INIT_FILE_NAME: %0s!"}, - C_CORENAME, init_file_str); - $finish; - end else begin - // loop through the mif file, loading in the data - for (i = 0; i < C_WRITE_DEPTH_A*addr_step; i = i + addr_step) begin - status = $fscanf(initfile, "%b", mif_data); - if (status > 0) begin - write_a(i, {C_WEA_WIDTH{1'b1}}, mif_data, 1'b0, 1'b0); - end - end - $fclose(initfile); - end //initfile - end //init_file_str - end //C_LOAD_INIT_FILE - - - if (C_USE_BRAM_BLOCK) begin - // Get specialized data from the MIF file - if (C_INIT_FILE != "NONE") begin - if (mem_init_file_str == "") begin - $fdisplay(ERRFILE, "%0s ERROR: C_INIT_FILE is empty!", - C_CORENAME); - $finish; - end else begin - meminitfile = $fopen(mem_init_file_str, "r"); - if (meminitfile == 0) begin - $fdisplay(ERRFILE, {"%0s, ERROR: Problem opening", - "C_INIT_FILE: %0s!"}, - C_CORENAME, mem_init_file_str); - $finish; - end else begin - // loop through the mif file, loading in the data - $readmemh(mem_init_file_str, memory ); - for (j = 0; j < MAX_DEPTH-1 ; j = j + 1) begin - end - $fclose(meminitfile); - end //meminitfile - end //mem_init_file_str - end //C_INIT_FILE - end //C_USE_BRAM_BLOCK - - //Display output message indicating that the behavioral model is done - //initializing - if (C_USE_DEFAULT_DATA || C_LOAD_INIT_FILE) - $display(" Block Memory Generator data initialization complete."); - end - endtask - - //************** - // log2roundup - //************** - function integer log2roundup (input integer data_value); - integer width; - integer cnt; - begin - width = 0; - - if (data_value > 1) begin - for(cnt=1 ; cnt < data_value ; cnt = cnt * 2) begin - width = width + 1; - end //loop - end //if - - log2roundup = width; - - end //log2roundup - endfunction - - - //******************* - // collision_check - //******************* - function integer collision_check (input reg [C_ADDRA_WIDTH-1:0] addr_a, - input integer iswrite_a, - input reg [C_ADDRB_WIDTH-1:0] addr_b, - input integer iswrite_b); - reg c_aw_bw, c_aw_br, c_ar_bw; - integer scaled_addra_to_waddrb_width; - integer scaled_addrb_to_waddrb_width; - integer scaled_addra_to_waddra_width; - integer scaled_addrb_to_waddra_width; - integer scaled_addra_to_raddrb_width; - integer scaled_addrb_to_raddrb_width; - integer scaled_addra_to_raddra_width; - integer scaled_addrb_to_raddra_width; - - - - begin - - c_aw_bw = 0; - c_aw_br = 0; - c_ar_bw = 0; - - //If write_addr_b_width is smaller, scale both addresses to that width for - //comparing write_addr_a and write_addr_b; addr_a starts as C_ADDRA_WIDTH, - //scale it down to write_addr_b_width. addr_b starts as C_ADDRB_WIDTH, - //scale it down to write_addr_b_width. Once both are scaled to - //write_addr_b_width, compare. - scaled_addra_to_waddrb_width = ((addr_a)/ - 2**(C_ADDRA_WIDTH-write_addr_b_width)); - scaled_addrb_to_waddrb_width = ((addr_b)/ - 2**(C_ADDRB_WIDTH-write_addr_b_width)); - - //If write_addr_a_width is smaller, scale both addresses to that width for - //comparing write_addr_a and write_addr_b; addr_a starts as C_ADDRA_WIDTH, - //scale it down to write_addr_a_width. addr_b starts as C_ADDRB_WIDTH, - //scale it down to write_addr_a_width. Once both are scaled to - //write_addr_a_width, compare. - scaled_addra_to_waddra_width = ((addr_a)/ - 2**(C_ADDRA_WIDTH-write_addr_a_width)); - scaled_addrb_to_waddra_width = ((addr_b)/ - 2**(C_ADDRB_WIDTH-write_addr_a_width)); - - //If read_addr_b_width is smaller, scale both addresses to that width for - //comparing write_addr_a and read_addr_b; addr_a starts as C_ADDRA_WIDTH, - //scale it down to read_addr_b_width. addr_b starts as C_ADDRB_WIDTH, - //scale it down to read_addr_b_width. Once both are scaled to - //read_addr_b_width, compare. - scaled_addra_to_raddrb_width = ((addr_a)/ - 2**(C_ADDRA_WIDTH-read_addr_b_width)); - scaled_addrb_to_raddrb_width = ((addr_b)/ - 2**(C_ADDRB_WIDTH-read_addr_b_width)); - - //If read_addr_a_width is smaller, scale both addresses to that width for - //comparing read_addr_a and write_addr_b; addr_a starts as C_ADDRA_WIDTH, - //scale it down to read_addr_a_width. addr_b starts as C_ADDRB_WIDTH, - //scale it down to read_addr_a_width. Once both are scaled to - //read_addr_a_width, compare. - scaled_addra_to_raddra_width = ((addr_a)/ - 2**(C_ADDRA_WIDTH-read_addr_a_width)); - scaled_addrb_to_raddra_width = ((addr_b)/ - 2**(C_ADDRB_WIDTH-read_addr_a_width)); - - //Look for a write-write collision. In order for a write-write - //collision to exist, both ports must have a write transaction. - if (iswrite_a && iswrite_b) begin - if (write_addr_a_width > write_addr_b_width) begin - if (scaled_addra_to_waddrb_width == scaled_addrb_to_waddrb_width) begin - c_aw_bw = 1; - end else begin - c_aw_bw = 0; - end - end else begin - if (scaled_addrb_to_waddra_width == scaled_addra_to_waddra_width) begin - c_aw_bw = 1; - end else begin - c_aw_bw = 0; - end - end //width - end //iswrite_a and iswrite_b - - //If the B port is reading (which means it is enabled - so could be - //a TX_WRITE or TX_READ), then check for a write-read collision). - //This could happen whether or not a write-write collision exists due - //to asymmetric write/read ports. - if (iswrite_a) begin - if (write_addr_a_width > read_addr_b_width) begin - if (scaled_addra_to_raddrb_width == scaled_addrb_to_raddrb_width) begin - c_aw_br = 1; - end else begin - c_aw_br = 0; - end - end else begin - if (scaled_addrb_to_waddra_width == scaled_addra_to_waddra_width) begin - c_aw_br = 1; - end else begin - c_aw_br = 0; - end - end //width - end //iswrite_a - - //If the A port is reading (which means it is enabled - so could be - // a TX_WRITE or TX_READ), then check for a write-read collision). - //This could happen whether or not a write-write collision exists due - // to asymmetric write/read ports. - if (iswrite_b) begin - if (read_addr_a_width > write_addr_b_width) begin - if (scaled_addra_to_waddrb_width == scaled_addrb_to_waddrb_width) begin - c_ar_bw = 1; - end else begin - c_ar_bw = 0; - end - end else begin - if (scaled_addrb_to_raddra_width == scaled_addra_to_raddra_width) begin - c_ar_bw = 1; - end else begin - c_ar_bw = 0; - end - end //width - end //iswrite_b - - - - collision_check = c_aw_bw | c_aw_br | c_ar_bw; - - end - endfunction - - //******************************* - // power on values - //******************************* - initial begin - // Load up the memory - init_memory; - // Load up the output registers and latches - if ($sscanf(inita_str, "%h", inita_val)) begin - memory_out_a = inita_val; - end else begin - memory_out_a = 0; - end - if ($sscanf(initb_str, "%h", initb_val)) begin - memory_out_b = initb_val; - end else begin - memory_out_b = 0; - end - - sbiterr_in = 1'b0; - dbiterr_in = 1'b0; - rdaddrecc_in = 0; - - // Determine the effective address widths for each of the 4 ports - write_addr_a_width = C_ADDRA_WIDTH - log2roundup(WRITE_ADDR_A_DIV); - read_addr_a_width = C_ADDRA_WIDTH - log2roundup(READ_ADDR_A_DIV); - write_addr_b_width = C_ADDRB_WIDTH - log2roundup(WRITE_ADDR_B_DIV); - read_addr_b_width = C_ADDRB_WIDTH - log2roundup(READ_ADDR_B_DIV); - - $display("Block Memory Generator module %m is using a behavioral model for simulation which will not precisely model memory collision behavior."); - - end - - //*************************************************************************** - // These are the main blocks which schedule read and write operations - // Note that the reset priority feature at the latch stage is only supported - // for Spartan-6. For other families, the default priority at the latch stage - // is "CE" - //*************************************************************************** - // Synchronous clocks: schedule port operations with respect to - // both write operating modes - generate - if(C_COMMON_CLK && (C_WRITE_MODE_A == "WRITE_FIRST") && (C_WRITE_MODE_B == - "WRITE_FIRST")) begin : com_clk_sched_wf_wf - always @(posedge CLKA) begin - //Write A - if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR); - //Write B - if (web_i) write_b(ADDRB, web_i, DINB); - - if (rea_i) read_a(ADDRA, reseta_i); - - //Read B - if (reb_i) read_b(ADDRB, resetb_i); - end - end - else - if(C_COMMON_CLK && (C_WRITE_MODE_A == "READ_FIRST") && (C_WRITE_MODE_B == - "WRITE_FIRST")) begin : com_clk_sched_rf_wf - always @(posedge CLKA) begin - //Write B - if (web_i) write_b(ADDRB, web_i, DINB); - //Read B - if (reb_i) read_b(ADDRB, resetb_i); - //Read A - if (rea_i) read_a(ADDRA, reseta_i); - //Write A - if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR); - end - end - else - if(C_COMMON_CLK && (C_WRITE_MODE_A == "WRITE_FIRST") && (C_WRITE_MODE_B == - "READ_FIRST")) begin : com_clk_sched_wf_rf - always @(posedge CLKA) begin - //Write A - if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR); - //Read A - if (rea_i) read_a(ADDRA, reseta_i); - //Read B - if (reb_i) read_b(ADDRB, resetb_i); - //Write B - if (web_i) write_b(ADDRB, web_i, DINB); - end - end - else - if(C_COMMON_CLK && (C_WRITE_MODE_A == "READ_FIRST") && (C_WRITE_MODE_B == - "READ_FIRST")) begin : com_clk_sched_rf_rf - always @(posedge CLKA) begin - //Read A - if (rea_i) read_a(ADDRA, reseta_i); - //Read B - if (reb_i) read_b(ADDRB, resetb_i); - //Write A - if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR); - //Write B - if (web_i) write_b(ADDRB, web_i, DINB); - end - end - else if(C_COMMON_CLK && (C_WRITE_MODE_A =="WRITE_FIRST") && (C_WRITE_MODE_B == - "NO_CHANGE")) begin : com_clk_sched_wf_nc - always @(posedge CLKA) begin - //Write A - if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR); - //Read A - if (rea_i) read_a(ADDRA, reseta_i); - //Read B - if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i); - //Write B - if (web_i) write_b(ADDRB, web_i, DINB); - end - end - else if(C_COMMON_CLK && (C_WRITE_MODE_A =="READ_FIRST") && (C_WRITE_MODE_B == - "NO_CHANGE")) begin : com_clk_sched_rf_nc - always @(posedge CLKA) begin - //Read A - if (rea_i) read_a(ADDRA, reseta_i); - //Read B - if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i); - //Write A - if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR); - //Write B - if (web_i) write_b(ADDRB, web_i, DINB); - end - end - else if(C_COMMON_CLK && (C_WRITE_MODE_A =="NO_CHANGE") && (C_WRITE_MODE_B == - "WRITE_FIRST")) begin : com_clk_sched_nc_wf - always @(posedge CLKA) begin - //Write A - if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR); - //Write B - if (web_i) write_b(ADDRB, web_i, DINB); - //Read A - if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i); - //Read B - if (reb_i) read_b(ADDRB, resetb_i); - end - end - else if(C_COMMON_CLK && (C_WRITE_MODE_A =="NO_CHANGE") && (C_WRITE_MODE_B == - "READ_FIRST")) begin : com_clk_sched_nc_rf - always @(posedge CLKA) begin - //Read B - if (reb_i) read_b(ADDRB, resetb_i); - //Read A - if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i); - //Write A - if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR); - //Write B - if (web_i) write_b(ADDRB, web_i, DINB); - end - end - else if(C_COMMON_CLK && (C_WRITE_MODE_A =="NO_CHANGE") && (C_WRITE_MODE_B == - "NO_CHANGE")) begin : com_clk_sched_nc_nc - always @(posedge CLKA) begin - //Write A - if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR); - //Write B - if (web_i) write_b(ADDRB, web_i, DINB); - //Read A - if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i); - //Read B - if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i); - end - end - else if(C_COMMON_CLK) begin: com_clk_sched_default - always @(posedge CLKA) begin - //Write A - if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR); - //Write B - if (web_i) write_b(ADDRB, web_i, DINB); - //Read A - if (rea_i) read_a(ADDRA, reseta_i); - //Read B - if (reb_i) read_b(ADDRB, resetb_i); - end - end - endgenerate - - // Asynchronous clocks: port operation is independent - generate - if((!C_COMMON_CLK) && (C_WRITE_MODE_A == "WRITE_FIRST")) begin : async_clk_sched_clka_wf - always @(posedge CLKA) begin - //Write A - if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR); - //Read A - if (rea_i) read_a(ADDRA, reseta_i); - end - end - else if((!C_COMMON_CLK) && (C_WRITE_MODE_A == "READ_FIRST")) begin : async_clk_sched_clka_rf - always @(posedge CLKA) begin - //Read A - if (rea_i) read_a(ADDRA, reseta_i); - //Write A - if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR); - end - end - else if((!C_COMMON_CLK) && (C_WRITE_MODE_A == "NO_CHANGE")) begin : async_clk_sched_clka_nc - always @(posedge CLKA) begin - //Write A - if (wea_i) write_a(ADDRA, wea_i, DINA, INJECTSBITERR, INJECTDBITERR); - //Read A - if (rea_i && (!wea_i || reseta_i)) read_a(ADDRA, reseta_i); - end - end - endgenerate - - generate - if ((!C_COMMON_CLK) && (C_WRITE_MODE_B == "WRITE_FIRST")) begin: async_clk_sched_clkb_wf - always @(posedge CLKB) begin - //Write B - if (web_i) write_b(ADDRB, web_i, DINB); - //Read B - if (reb_i) read_b(ADDRB, resetb_i); - end - end - else if ((!C_COMMON_CLK) && (C_WRITE_MODE_B == "READ_FIRST")) begin: async_clk_sched_clkb_rf - always @(posedge CLKB) begin - //Read B - if (reb_i) read_b(ADDRB, resetb_i); - //Write B - if (web_i) write_b(ADDRB, web_i, DINB); - end - end - else if ((!C_COMMON_CLK) && (C_WRITE_MODE_B == "NO_CHANGE")) begin: async_clk_sched_clkb_nc - always @(posedge CLKB) begin - //Write B - if (web_i) write_b(ADDRB, web_i, DINB); - //Read B - if (reb_i && (!web_i || resetb_i)) read_b(ADDRB, resetb_i); - end - end - endgenerate - - - //*************************************************************** - // Instantiate the variable depth output register stage module - //*************************************************************** - // Port A - - assign rsta_outp_stage = RSTA & (~SLEEP); - - blk_mem_gen_v8_4_4_output_stage - #(.C_FAMILY (C_FAMILY), - .C_XDEVICEFAMILY (C_XDEVICEFAMILY), - .C_RST_TYPE ("SYNC"), - .C_HAS_RST (C_HAS_RSTA), - .C_RSTRAM (C_RSTRAM_A), - .C_RST_PRIORITY (C_RST_PRIORITY_A), - .C_INIT_VAL (C_INITA_VAL), - .C_HAS_EN (C_HAS_ENA), - .C_HAS_REGCE (C_HAS_REGCEA), - .C_DATA_WIDTH (C_READ_WIDTH_A), - .C_ADDRB_WIDTH (C_ADDRB_WIDTH), - .C_HAS_MEM_OUTPUT_REGS (C_HAS_MEM_OUTPUT_REGS_A), - .C_USE_SOFTECC (C_USE_SOFTECC), - .C_USE_ECC (C_USE_ECC), - .NUM_STAGES (NUM_OUTPUT_STAGES_A), - .C_EN_ECC_PIPE (0), - .FLOP_DELAY (FLOP_DELAY)) - reg_a - (.CLK (CLKA), - .RST (rsta_outp_stage),//(RSTA), - .EN (ENA), - .REGCE (REGCEA), - .DIN_I (memory_out_a), - .DOUT (DOUTA), - .SBITERR_IN_I (1'b0), - .DBITERR_IN_I (1'b0), - .SBITERR (), - .DBITERR (), - .RDADDRECC_IN_I ({C_ADDRB_WIDTH{1'b0}}), - .ECCPIPECE (1'b0), - .RDADDRECC () - ); - - assign rstb_outp_stage = RSTB & (~SLEEP); - - // Port B - blk_mem_gen_v8_4_4_output_stage - #(.C_FAMILY (C_FAMILY), - .C_XDEVICEFAMILY (C_XDEVICEFAMILY), - .C_RST_TYPE ("SYNC"), - .C_HAS_RST (C_HAS_RSTB), - .C_RSTRAM (C_RSTRAM_B), - .C_RST_PRIORITY (C_RST_PRIORITY_B), - .C_INIT_VAL (C_INITB_VAL), - .C_HAS_EN (C_HAS_ENB), - .C_HAS_REGCE (C_HAS_REGCEB), - .C_DATA_WIDTH (C_READ_WIDTH_B), - .C_ADDRB_WIDTH (C_ADDRB_WIDTH), - .C_HAS_MEM_OUTPUT_REGS (C_HAS_MEM_OUTPUT_REGS_B), - .C_USE_SOFTECC (C_USE_SOFTECC), - .C_USE_ECC (C_USE_ECC), - .NUM_STAGES (NUM_OUTPUT_STAGES_B), - .C_EN_ECC_PIPE (C_EN_ECC_PIPE), - .FLOP_DELAY (FLOP_DELAY)) - reg_b - (.CLK (CLKB), - .RST (rstb_outp_stage),//(RSTB), - .EN (ENB), - .REGCE (REGCEB), - .DIN_I (memory_out_b), - .DOUT (dout_i), - .SBITERR_IN_I (sbiterr_in), - .DBITERR_IN_I (dbiterr_in), - .SBITERR (sbiterr_i), - .DBITERR (dbiterr_i), - .RDADDRECC_IN_I (rdaddrecc_in), - .ECCPIPECE (ECCPIPECE), - .RDADDRECC (rdaddrecc_i) - ); - - //*************************************************************** - // Instantiate the Input and Output register stages - //*************************************************************** -blk_mem_gen_v8_4_4_softecc_output_reg_stage - #(.C_DATA_WIDTH (C_READ_WIDTH_B), - .C_ADDRB_WIDTH (C_ADDRB_WIDTH), - .C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B), - .C_USE_SOFTECC (C_USE_SOFTECC), - .FLOP_DELAY (FLOP_DELAY)) - has_softecc_output_reg_stage - (.CLK (CLKB), - .DIN (dout_i), - .DOUT (DOUTB), - .SBITERR_IN (sbiterr_i), - .DBITERR_IN (dbiterr_i), - .SBITERR (sbiterr_sdp), - .DBITERR (dbiterr_sdp), - .RDADDRECC_IN (rdaddrecc_i), - .RDADDRECC (rdaddrecc_sdp) -); - - //**************************************************** - // Synchronous collision checks - //**************************************************** -// CR 780544 : To make verilog model's collison warnings in consistant with -// vhdl model, the non-blocking assignments are replaced with blocking -// assignments. - generate if (!C_DISABLE_WARN_BHV_COLL && C_COMMON_CLK) begin : sync_coll - always @(posedge CLKA) begin - // Possible collision if both are enabled and the addresses match - if (ena_i && enb_i) begin - if (wea_i || web_i) begin - is_collision = collision_check(ADDRA, wea_i, ADDRB, web_i); - end else begin - is_collision = 0; - end - end else begin - is_collision = 0; - end - - // If the write port is in READ_FIRST mode, there is no collision - if (C_WRITE_MODE_A=="READ_FIRST" && wea_i && !web_i) begin - is_collision = 0; - end - if (C_WRITE_MODE_B=="READ_FIRST" && web_i && !wea_i) begin - is_collision = 0; - end - - // Only flag if one of the accesses is a write - if (is_collision && (wea_i || web_i)) begin - $fwrite(COLLFILE, "%0s collision detected at time: %0d, ", - C_CORENAME, $time); - $fwrite(COLLFILE, "Instance: %m, A %0s address: %0h, B %0s address: %0h\n", - wea_i ? "write" : "read", ADDRA, - web_i ? "write" : "read", ADDRB); - end - end - - //**************************************************** - // Asynchronous collision checks - //**************************************************** - end else if (!C_DISABLE_WARN_BHV_COLL && !C_COMMON_CLK) begin : async_coll - - // Delay A and B addresses in order to mimic setup/hold times - wire [C_ADDRA_WIDTH-1:0] #COLL_DELAY addra_delay = ADDRA; - wire [0:0] #COLL_DELAY wea_delay = wea_i; - wire #COLL_DELAY ena_delay = ena_i; - wire [C_ADDRB_WIDTH-1:0] #COLL_DELAY addrb_delay = ADDRB; - wire [0:0] #COLL_DELAY web_delay = web_i; - wire #COLL_DELAY enb_delay = enb_i; - - // Do the checks w/rt A - always @(posedge CLKA) begin - // Possible collision if both are enabled and the addresses match - if (ena_i && enb_i) begin - if (wea_i || web_i) begin - is_collision_a = collision_check(ADDRA, wea_i, ADDRB, web_i); - end else begin - is_collision_a = 0; - end - end else begin - is_collision_a = 0; - end - - if (ena_i && enb_delay) begin - if(wea_i || web_delay) begin - is_collision_delay_a = collision_check(ADDRA, wea_i, addrb_delay, - web_delay); - end else begin - is_collision_delay_a = 0; - end - end else begin - is_collision_delay_a = 0; - end - - // Only flag if B access is a write - if (is_collision_a && web_i) begin - $fwrite(COLLFILE, "%0s collision detected at time: %0d, ", - C_CORENAME, $time); - $fwrite(COLLFILE, "Instance: %m, A %0s address: %0h, B write address: %0h\n", - wea_i ? "write" : "read", ADDRA, ADDRB); - - end else if (is_collision_delay_a && web_delay) begin - $fwrite(COLLFILE, "%0s collision detected at time: %0d, ", - C_CORENAME, $time); - $fwrite(COLLFILE, "Instance: %m, A %0s address: %0h, B write address: %0h\n", - wea_i ? "write" : "read", ADDRA, addrb_delay); - end - - end - - // Do the checks w/rt B - always @(posedge CLKB) begin - - // Possible collision if both are enabled and the addresses match - if (ena_i && enb_i) begin - if (wea_i || web_i) begin - is_collision_b = collision_check(ADDRA, wea_i, ADDRB, web_i); - end else begin - is_collision_b = 0; - end - end else begin - is_collision_b = 0; - end - - if (ena_delay && enb_i) begin - if (wea_delay || web_i) begin - is_collision_delay_b = collision_check(addra_delay, wea_delay, ADDRB, - web_i); - end else begin - is_collision_delay_b = 0; - end - end else begin - is_collision_delay_b = 0; - end - - - // Only flag if A access is a write - if (is_collision_b && wea_i) begin - $fwrite(COLLFILE, "%0s collision detected at time: %0d, ", - C_CORENAME, $time); - $fwrite(COLLFILE, "Instance: %m, A write address: %0h, B %s address: %0h\n", - ADDRA, web_i ? "write" : "read", ADDRB); - - end else if (is_collision_delay_b && wea_delay) begin - $fwrite(COLLFILE, "%0s collision detected at time: %0d, ", - C_CORENAME, $time); - $fwrite(COLLFILE, "Instance: %m, A write address: %0h, B %s address: %0h\n", - addra_delay, web_i ? "write" : "read", ADDRB); - end - - end - end - endgenerate - -endmodule -//***************************************************************************** -// Top module wraps Input register and Memory module -// -// This module is the top-level behavioral model and this implements the memory -// module and the input registers -//***************************************************************************** -module blk_mem_gen_v8_4_4 - #(parameter C_CORENAME = "blk_mem_gen_v8_4_4", - parameter C_FAMILY = "virtex7", - parameter C_XDEVICEFAMILY = "virtex7", - parameter C_ELABORATION_DIR = "", - parameter C_INTERFACE_TYPE = 0, - parameter C_USE_BRAM_BLOCK = 0, - parameter C_CTRL_ECC_ALGO = "NONE", - parameter C_ENABLE_32BIT_ADDRESS = 0, - parameter C_AXI_TYPE = 0, - parameter C_AXI_SLAVE_TYPE = 0, - parameter C_HAS_AXI_ID = 0, - parameter C_AXI_ID_WIDTH = 4, - parameter C_MEM_TYPE = 2, - parameter C_BYTE_SIZE = 9, - parameter C_ALGORITHM = 1, - parameter C_PRIM_TYPE = 3, - parameter C_LOAD_INIT_FILE = 0, - parameter C_INIT_FILE_NAME = "", - parameter C_INIT_FILE = "", - parameter C_USE_DEFAULT_DATA = 0, - parameter C_DEFAULT_DATA = "0", - //parameter C_RST_TYPE = "SYNC", - parameter C_HAS_RSTA = 0, - parameter C_RST_PRIORITY_A = "CE", - parameter C_RSTRAM_A = 0, - parameter C_INITA_VAL = "0", - parameter C_HAS_ENA = 1, - parameter C_HAS_REGCEA = 0, - parameter C_USE_BYTE_WEA = 0, - parameter C_WEA_WIDTH = 1, - parameter C_WRITE_MODE_A = "WRITE_FIRST", - parameter C_WRITE_WIDTH_A = 32, - parameter C_READ_WIDTH_A = 32, - parameter C_WRITE_DEPTH_A = 64, - parameter C_READ_DEPTH_A = 64, - parameter C_ADDRA_WIDTH = 5, - parameter C_HAS_RSTB = 0, - parameter C_RST_PRIORITY_B = "CE", - parameter C_RSTRAM_B = 0, - parameter C_INITB_VAL = "", - parameter C_HAS_ENB = 1, - parameter C_HAS_REGCEB = 0, - parameter C_USE_BYTE_WEB = 0, - parameter C_WEB_WIDTH = 1, - parameter C_WRITE_MODE_B = "WRITE_FIRST", - parameter C_WRITE_WIDTH_B = 32, - parameter C_READ_WIDTH_B = 32, - parameter C_WRITE_DEPTH_B = 64, - parameter C_READ_DEPTH_B = 64, - parameter C_ADDRB_WIDTH = 5, - parameter C_HAS_MEM_OUTPUT_REGS_A = 0, - parameter C_HAS_MEM_OUTPUT_REGS_B = 0, - parameter C_HAS_MUX_OUTPUT_REGS_A = 0, - parameter C_HAS_MUX_OUTPUT_REGS_B = 0, - parameter C_HAS_SOFTECC_INPUT_REGS_A = 0, - parameter C_HAS_SOFTECC_OUTPUT_REGS_B= 0, - parameter C_MUX_PIPELINE_STAGES = 0, - parameter C_USE_SOFTECC = 0, - parameter C_READ_LATENCY_A = 1, - parameter C_READ_LATENCY_B = 1, - parameter C_USE_ECC = 0, - parameter C_EN_ECC_PIPE = 0, - parameter C_HAS_INJECTERR = 0, - parameter C_SIM_COLLISION_CHECK = "NONE", - parameter C_COMMON_CLK = 1, - parameter C_DISABLE_WARN_BHV_COLL = 0, - parameter C_EN_SLEEP_PIN = 0, - parameter C_USE_URAM = 0, - parameter C_EN_RDADDRA_CHG = 0, - parameter C_EN_RDADDRB_CHG = 0, - parameter C_EN_DEEPSLEEP_PIN = 0, - parameter C_EN_SHUTDOWN_PIN = 0, - parameter C_EN_SAFETY_CKT = 0, - parameter C_COUNT_36K_BRAM = "", - parameter C_COUNT_18K_BRAM = "", - parameter C_EST_POWER_SUMMARY = "", - parameter C_DISABLE_WARN_BHV_RANGE = 0 - - ) - (input clka, - input rsta, - input ena, - input regcea, - input [C_WEA_WIDTH-1:0] wea, - input [C_ADDRA_WIDTH-1:0] addra, - input [C_WRITE_WIDTH_A-1:0] dina, - output [C_READ_WIDTH_A-1:0] douta, - input clkb, - input rstb, - input enb, - input regceb, - input [C_WEB_WIDTH-1:0] web, - input [C_ADDRB_WIDTH-1:0] addrb, - input [C_WRITE_WIDTH_B-1:0] dinb, - output [C_READ_WIDTH_B-1:0] doutb, - input injectsbiterr, - input injectdbiterr, - output sbiterr, - output dbiterr, - output [C_ADDRB_WIDTH-1:0] rdaddrecc, - input eccpipece, - input sleep, - input deepsleep, - input shutdown, - output rsta_busy, - output rstb_busy, - //AXI BMG Input and Output Port Declarations - - //AXI Global Signals - input s_aclk, - input s_aresetn, - - //AXI Full/lite slave write (write side) - input [C_AXI_ID_WIDTH-1:0] s_axi_awid, - input [31:0] s_axi_awaddr, - input [7:0] s_axi_awlen, - input [2:0] s_axi_awsize, - input [1:0] s_axi_awburst, - input s_axi_awvalid, - output s_axi_awready, - input [C_WRITE_WIDTH_A-1:0] s_axi_wdata, - input [C_WEA_WIDTH-1:0] s_axi_wstrb, - input s_axi_wlast, - input s_axi_wvalid, - output s_axi_wready, - output [C_AXI_ID_WIDTH-1:0] s_axi_bid, - output [1:0] s_axi_bresp, - output s_axi_bvalid, - input s_axi_bready, - - //AXI Full/lite slave read (write side) - input [C_AXI_ID_WIDTH-1:0] s_axi_arid, - input [31:0] s_axi_araddr, - input [7:0] s_axi_arlen, - input [2:0] s_axi_arsize, - input [1:0] s_axi_arburst, - input s_axi_arvalid, - output s_axi_arready, - output [C_AXI_ID_WIDTH-1:0] s_axi_rid, - output [C_WRITE_WIDTH_B-1:0] s_axi_rdata, - output [1:0] s_axi_rresp, - output s_axi_rlast, - output s_axi_rvalid, - input s_axi_rready, - - //AXI Full/lite sideband signals - input s_axi_injectsbiterr, - input s_axi_injectdbiterr, - output s_axi_sbiterr, - output s_axi_dbiterr, - output [C_ADDRB_WIDTH-1:0] s_axi_rdaddrecc - - ); -//****************************** -// Port and Generic Definitions -//****************************** - ////////////////////////////////////////////////////////////////////////// - // Generic Definitions - ////////////////////////////////////////////////////////////////////////// - // C_CORENAME : Instance name of the Block Memory Generator core - // C_FAMILY,C_XDEVICEFAMILY: Designates architecture targeted. The following - // options are available - "spartan3", "spartan6", - // "virtex4", "virtex5", "virtex6" and "virtex6l". - // C_MEM_TYPE : Designates memory type. - // It can be - // 0 - Single Port Memory - // 1 - Simple Dual Port Memory - // 2 - True Dual Port Memory - // 3 - Single Port Read Only Memory - // 4 - Dual Port Read Only Memory - // C_BYTE_SIZE : Size of a byte (8 or 9 bits) - // C_ALGORITHM : Designates the algorithm method used - // for constructing the memory. - // It can be Fixed_Primitives, Minimum_Area or - // Low_Power - // C_PRIM_TYPE : Designates the user selected primitive used to - // construct the memory. - // - // C_LOAD_INIT_FILE : Designates the use of an initialization file to - // initialize memory contents. - // C_INIT_FILE_NAME : Memory initialization file name. - // C_USE_DEFAULT_DATA : Designates whether to fill remaining - // initialization space with default data - // C_DEFAULT_DATA : Default value of all memory locations - // not initialized by the memory - // initialization file. - // C_RST_TYPE : Type of reset - Synchronous or Asynchronous - // C_HAS_RSTA : Determines the presence of the RSTA port - // C_RST_PRIORITY_A : Determines the priority between CE and SR for - // Port A. - // C_RSTRAM_A : Determines if special reset behavior is used for - // Port A - // C_INITA_VAL : The initialization value for Port A - // C_HAS_ENA : Determines the presence of the ENA port - // C_HAS_REGCEA : Determines the presence of the REGCEA port - // C_USE_BYTE_WEA : Determines if the Byte Write is used or not. - // C_WEA_WIDTH : The width of the WEA port - // C_WRITE_MODE_A : Configurable write mode for Port A. It can be - // WRITE_FIRST, READ_FIRST or NO_CHANGE. - // C_WRITE_WIDTH_A : Memory write width for Port A. - // C_READ_WIDTH_A : Memory read width for Port A. - // C_WRITE_DEPTH_A : Memory write depth for Port A. - // C_READ_DEPTH_A : Memory read depth for Port A. - // C_ADDRA_WIDTH : Width of the ADDRA input port - // C_HAS_RSTB : Determines the presence of the RSTB port - // C_RST_PRIORITY_B : Determines the priority between CE and SR for - // Port B. - // C_RSTRAM_B : Determines if special reset behavior is used for - // Port B - // C_INITB_VAL : The initialization value for Port B - // C_HAS_ENB : Determines the presence of the ENB port - // C_HAS_REGCEB : Determines the presence of the REGCEB port - // C_USE_BYTE_WEB : Determines if the Byte Write is used or not. - // C_WEB_WIDTH : The width of the WEB port - // C_WRITE_MODE_B : Configurable write mode for Port B. It can be - // WRITE_FIRST, READ_FIRST or NO_CHANGE. - // C_WRITE_WIDTH_B : Memory write width for Port B. - // C_READ_WIDTH_B : Memory read width for Port B. - // C_WRITE_DEPTH_B : Memory write depth for Port B. - // C_READ_DEPTH_B : Memory read depth for Port B. - // C_ADDRB_WIDTH : Width of the ADDRB input port - // C_HAS_MEM_OUTPUT_REGS_A : Designates the use of a register at the output - // of the RAM primitive for Port A. - // C_HAS_MEM_OUTPUT_REGS_B : Designates the use of a register at the output - // of the RAM primitive for Port B. - // C_HAS_MUX_OUTPUT_REGS_A : Designates the use of a register at the output - // of the MUX for Port A. - // C_HAS_MUX_OUTPUT_REGS_B : Designates the use of a register at the output - // of the MUX for Port B. - // C_HAS_SOFTECC_INPUT_REGS_A : - // C_HAS_SOFTECC_OUTPUT_REGS_B : - // C_MUX_PIPELINE_STAGES : Designates the number of pipeline stages in - // between the muxes. - // C_USE_SOFTECC : Determines if the Soft ECC feature is used or - // not. Only applicable Spartan-6 - // C_USE_ECC : Determines if the ECC feature is used or - // not. Only applicable for V5 and V6 - // C_HAS_INJECTERR : Determines if the error injection pins - // are present or not. If the ECC feature - // is not used, this value is defaulted to - // 0, else the following are the allowed - // values: - // 0 : No INJECTSBITERR or INJECTDBITERR pins - // 1 : Only INJECTSBITERR pin exists - // 2 : Only INJECTDBITERR pin exists - // 3 : Both INJECTSBITERR and INJECTDBITERR pins exist - // C_SIM_COLLISION_CHECK : Controls the disabling of Unisim model collision - // warnings. It can be "ALL", "NONE", - // "Warnings_Only" or "Generate_X_Only". - // C_COMMON_CLK : Determins if the core has a single CLK input. - // C_DISABLE_WARN_BHV_COLL : Controls the Behavioral Model Collision warnings - // C_DISABLE_WARN_BHV_RANGE: Controls the Behavioral Model Out of Range - // warnings - ////////////////////////////////////////////////////////////////////////// - // Port Definitions - ////////////////////////////////////////////////////////////////////////// - // CLKA : Clock to synchronize all read and write operations of Port A. - // RSTA : Reset input to reset memory outputs to a user-defined - // reset state for Port A. - // ENA : Enable all read and write operations of Port A. - // REGCEA : Register Clock Enable to control each pipeline output - // register stages for Port A. - // WEA : Write Enable to enable all write operations of Port A. - // ADDRA : Address of Port A. - // DINA : Data input of Port A. - // DOUTA : Data output of Port A. - // CLKB : Clock to synchronize all read and write operations of Port B. - // RSTB : Reset input to reset memory outputs to a user-defined - // reset state for Port B. - // ENB : Enable all read and write operations of Port B. - // REGCEB : Register Clock Enable to control each pipeline output - // register stages for Port B. - // WEB : Write Enable to enable all write operations of Port B. - // ADDRB : Address of Port B. - // DINB : Data input of Port B. - // DOUTB : Data output of Port B. - // INJECTSBITERR : Single Bit ECC Error Injection Pin. - // INJECTDBITERR : Double Bit ECC Error Injection Pin. - // SBITERR : Output signal indicating that a Single Bit ECC Error has been - // detected and corrected. - // DBITERR : Output signal indicating that a Double Bit ECC Error has been - // detected. - // RDADDRECC : Read Address Output signal indicating address at which an - // ECC error has occurred. - ////////////////////////////////////////////////////////////////////////// - - wire SBITERR; - wire DBITERR; - wire S_AXI_AWREADY; - wire S_AXI_WREADY; - wire S_AXI_BVALID; - wire S_AXI_ARREADY; - wire S_AXI_RLAST; - wire S_AXI_RVALID; - wire S_AXI_SBITERR; - wire S_AXI_DBITERR; - - wire [C_WEA_WIDTH-1:0] WEA = wea; - wire [C_ADDRA_WIDTH-1:0] ADDRA = addra; - wire [C_WRITE_WIDTH_A-1:0] DINA = dina; - wire [C_READ_WIDTH_A-1:0] DOUTA; - wire [C_WEB_WIDTH-1:0] WEB = web; - wire [C_ADDRB_WIDTH-1:0] ADDRB = addrb; - wire [C_WRITE_WIDTH_B-1:0] DINB = dinb; - wire [C_READ_WIDTH_B-1:0] DOUTB; - wire [C_ADDRB_WIDTH-1:0] RDADDRECC; - wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID = s_axi_awid; - wire [31:0] S_AXI_AWADDR = s_axi_awaddr; - wire [7:0] S_AXI_AWLEN = s_axi_awlen; - wire [2:0] S_AXI_AWSIZE = s_axi_awsize; - wire [1:0] S_AXI_AWBURST = s_axi_awburst; - wire [C_WRITE_WIDTH_A-1:0] S_AXI_WDATA = s_axi_wdata; - wire [C_WEA_WIDTH-1:0] S_AXI_WSTRB = s_axi_wstrb; - wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID; - wire [1:0] S_AXI_BRESP; - wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID = s_axi_arid; - wire [31:0] S_AXI_ARADDR = s_axi_araddr; - wire [7:0] S_AXI_ARLEN = s_axi_arlen; - wire [2:0] S_AXI_ARSIZE = s_axi_arsize; - wire [1:0] S_AXI_ARBURST = s_axi_arburst; - wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID; - wire [C_WRITE_WIDTH_B-1:0] S_AXI_RDATA; - wire [1:0] S_AXI_RRESP; - wire [C_ADDRB_WIDTH-1:0] S_AXI_RDADDRECC; - // Added to fix the simulation warning #CR731605 - wire [C_WEB_WIDTH-1:0] WEB_parameterized = 0; - wire ECCPIPECE; - wire SLEEP; - reg RSTA_BUSY = 0; - reg RSTB_BUSY = 0; - // Declaration of internal signals to avoid warnings #927399 - wire CLKA; - wire RSTA; - wire ENA; - wire REGCEA; - wire CLKB; - wire RSTB; - wire ENB; - wire REGCEB; - wire INJECTSBITERR; - wire INJECTDBITERR; - wire S_ACLK; - wire S_ARESETN; - wire S_AXI_AWVALID; - wire S_AXI_WLAST; - wire S_AXI_WVALID; - wire S_AXI_BREADY; - wire S_AXI_ARVALID; - wire S_AXI_RREADY; - wire S_AXI_INJECTSBITERR; - wire S_AXI_INJECTDBITERR; - - assign CLKA = clka; - assign RSTA = rsta; - assign ENA = ena; - assign REGCEA = regcea; - assign CLKB = clkb; - assign RSTB = rstb; - assign ENB = enb; - assign REGCEB = regceb; - assign INJECTSBITERR = injectsbiterr; - assign INJECTDBITERR = injectdbiterr; - assign ECCPIPECE = eccpipece; - assign SLEEP = sleep; - assign sbiterr = SBITERR; - assign dbiterr = DBITERR; - assign S_ACLK = s_aclk; - assign S_ARESETN = s_aresetn; - assign S_AXI_AWVALID = s_axi_awvalid; - assign s_axi_awready = S_AXI_AWREADY; - assign S_AXI_WLAST = s_axi_wlast; - assign S_AXI_WVALID = s_axi_wvalid; - assign s_axi_wready = S_AXI_WREADY; - assign s_axi_bvalid = S_AXI_BVALID; - assign S_AXI_BREADY = s_axi_bready; - assign S_AXI_ARVALID = s_axi_arvalid; - assign s_axi_arready = S_AXI_ARREADY; - assign s_axi_rlast = S_AXI_RLAST; - assign s_axi_rvalid = S_AXI_RVALID; - assign S_AXI_RREADY = s_axi_rready; - assign S_AXI_INJECTSBITERR = s_axi_injectsbiterr; - assign S_AXI_INJECTDBITERR = s_axi_injectdbiterr; - assign s_axi_sbiterr = S_AXI_SBITERR; - assign s_axi_dbiterr = S_AXI_DBITERR; - - assign rsta_busy = RSTA_BUSY; - assign rstb_busy = RSTB_BUSY; - - assign doutb = DOUTB; - assign douta = DOUTA; - assign rdaddrecc = RDADDRECC; - assign s_axi_bid = S_AXI_BID; - assign s_axi_bresp = S_AXI_BRESP; - assign s_axi_rid = S_AXI_RID; - assign s_axi_rdata = S_AXI_RDATA; - assign s_axi_rresp = S_AXI_RRESP; - assign s_axi_rdaddrecc = S_AXI_RDADDRECC; - - localparam FLOP_DELAY = 100; // 100 ps - - reg injectsbiterr_in; - reg injectdbiterr_in; - reg rsta_in; - reg ena_in; - reg regcea_in; - reg [C_WEA_WIDTH-1:0] wea_in; - reg [C_ADDRA_WIDTH-1:0] addra_in; - reg [C_WRITE_WIDTH_A-1:0] dina_in; - - wire [C_ADDRA_WIDTH-1:0] s_axi_awaddr_out_c; - wire [C_ADDRB_WIDTH-1:0] s_axi_araddr_out_c; - wire s_axi_wr_en_c; - wire s_axi_rd_en_c; - wire s_aresetn_a_c; - wire [7:0] s_axi_arlen_c ; - - - wire [C_AXI_ID_WIDTH-1 : 0] s_axi_rid_c; - wire [C_WRITE_WIDTH_B-1 : 0] s_axi_rdata_c; - wire [1:0] s_axi_rresp_c; - wire s_axi_rlast_c; - wire s_axi_rvalid_c; - wire s_axi_rready_c; - wire regceb_c; - - localparam C_AXI_PAYLOAD = (C_HAS_MUX_OUTPUT_REGS_B == 1)?C_WRITE_WIDTH_B+C_AXI_ID_WIDTH+3:C_AXI_ID_WIDTH+3; - wire [C_AXI_PAYLOAD-1 : 0] s_axi_payload_c; - wire [C_AXI_PAYLOAD-1 : 0] m_axi_payload_c; - -// Safety logic related signals - - reg [4:0] RSTA_SHFT_REG = 0; - reg POR_A = 0; - reg [4:0] RSTB_SHFT_REG = 0; - reg POR_B = 0; - - reg ENA_dly = 0; - reg ENA_dly_D = 0; - - reg ENB_dly = 0; - reg ENB_dly_D = 0; - - wire RSTA_I_SAFE; - wire RSTB_I_SAFE; - - wire ENA_I_SAFE; - wire ENB_I_SAFE; - - reg ram_rstram_a_busy = 0; - reg ram_rstreg_a_busy = 0; - reg ram_rstram_b_busy = 0; - reg ram_rstreg_b_busy = 0; - - reg ENA_dly_reg = 0; - reg ENB_dly_reg = 0; - - reg ENA_dly_reg_D = 0; - reg ENB_dly_reg_D = 0; - - //************** - // log2roundup - //************** - function integer log2roundup (input integer data_value); - integer width; - integer cnt; - begin - width = 0; - - if (data_value > 1) begin - for(cnt=1 ; cnt < data_value ; cnt = cnt * 2) begin - width = width + 1; - end //loop - end //if - - log2roundup = width; - - end //log2roundup - endfunction - - //************** - // log2int - //************** - function integer log2int (input integer data_value); - integer width; - integer cnt; - begin - width = 0; - cnt= data_value; - - for(cnt=data_value ; cnt >1 ; cnt = cnt / 2) begin - width = width + 1; - end //loop - - log2int = width; - - end //log2int - endfunction - - //************************************************************************** - // FUNCTION : divroundup - // Returns the ceiling value of the division - // Data_value - the quantity to be divided, dividend - // Divisor - the value to divide the data_value by - //************************************************************************** - function integer divroundup (input integer data_value,input integer divisor); - integer div; - begin - div = data_value/divisor; - if ((data_value % divisor) != 0) begin - div = div+1; - end //if - divroundup = div; - end //if - endfunction - - localparam AXI_FULL_MEMORY_SLAVE = ((C_AXI_SLAVE_TYPE == 0 && C_AXI_TYPE == 1)?1:0); - localparam C_AXI_ADDR_WIDTH_MSB = C_ADDRA_WIDTH+log2roundup(C_WRITE_WIDTH_A/8); - localparam C_AXI_ADDR_WIDTH = C_AXI_ADDR_WIDTH_MSB; - - //Data Width Number of LSB address bits to be discarded - //1 to 16 1 - //17 to 32 2 - //33 to 64 3 - //65 to 128 4 - //129 to 256 5 - //257 to 512 6 - //513 to 1024 7 - // The following two constants determine this. - - localparam LOWER_BOUND_VAL = (log2roundup(divroundup(C_WRITE_WIDTH_A,8) == 0))?0:(log2roundup(divroundup(C_WRITE_WIDTH_A,8))); - localparam C_AXI_ADDR_WIDTH_LSB = ((AXI_FULL_MEMORY_SLAVE == 1)?0:LOWER_BOUND_VAL); - localparam C_AXI_OS_WR = 2; - - //*********************************************** - // INPUT REGISTERS. - //*********************************************** - generate if (C_HAS_SOFTECC_INPUT_REGS_A==0) begin : no_softecc_input_reg_stage - always @* begin - injectsbiterr_in = INJECTSBITERR; - injectdbiterr_in = INJECTDBITERR; - rsta_in = RSTA; - ena_in = ENA; - regcea_in = REGCEA; - wea_in = WEA; - addra_in = ADDRA; - dina_in = DINA; - end //end always - end //end no_softecc_input_reg_stage - endgenerate - - generate if (C_HAS_SOFTECC_INPUT_REGS_A==1) begin : has_softecc_input_reg_stage - always @(posedge CLKA) begin - injectsbiterr_in <= #FLOP_DELAY INJECTSBITERR; - injectdbiterr_in <= #FLOP_DELAY INJECTDBITERR; - rsta_in <= #FLOP_DELAY RSTA; - ena_in <= #FLOP_DELAY ENA; - regcea_in <= #FLOP_DELAY REGCEA; - wea_in <= #FLOP_DELAY WEA; - addra_in <= #FLOP_DELAY ADDRA; - dina_in <= #FLOP_DELAY DINA; - end //end always - end //end input_reg_stages generate statement - endgenerate - - //************************************************************************** - // NO SAFETY LOGIC - //************************************************************************** - - generate - if (C_EN_SAFETY_CKT == 0) begin : NO_SAFETY_CKT_GEN - assign ENA_I_SAFE = ena_in; - assign ENB_I_SAFE = ENB; - assign RSTA_I_SAFE = rsta_in; - assign RSTB_I_SAFE = RSTB; - end - endgenerate - - //*************************************************************************** - // SAFETY LOGIC - // Power-ON Reset Generation - //*************************************************************************** - generate - if (C_EN_SAFETY_CKT == 1) begin - always @(posedge clka) RSTA_SHFT_REG <= #FLOP_DELAY {RSTA_SHFT_REG[3:0],1'b1} ; - always @(posedge clka) POR_A <= #FLOP_DELAY RSTA_SHFT_REG[4] ^ RSTA_SHFT_REG[0]; - always @(posedge clkb) RSTB_SHFT_REG <= #FLOP_DELAY {RSTB_SHFT_REG[3:0],1'b1} ; - always @(posedge clkb) POR_B <= #FLOP_DELAY RSTB_SHFT_REG[4] ^ RSTB_SHFT_REG[0]; - - assign RSTA_I_SAFE = rsta_in | POR_A; - assign RSTB_I_SAFE = (C_MEM_TYPE == 0 || C_MEM_TYPE == 3) ? 1'b0 : (RSTB | POR_B); - end - endgenerate - - //----------------------------------------------------------------------------- - // -- RSTA/B_BUSY Generation - //----------------------------------------------------------------------------- - - generate - if ((C_HAS_MEM_OUTPUT_REGS_A==0 || (C_HAS_MEM_OUTPUT_REGS_A==1 && C_RSTRAM_A==1)) && (C_EN_SAFETY_CKT == 1)) begin : RSTA_BUSY_NO_REG - always @(*) ram_rstram_a_busy = RSTA_I_SAFE | ENA_dly | ENA_dly_D; - always @(posedge clka) RSTA_BUSY <= #FLOP_DELAY ram_rstram_a_busy; - end - endgenerate - - generate - if (C_HAS_MEM_OUTPUT_REGS_A==1 && C_RSTRAM_A==0 && C_EN_SAFETY_CKT == 1) begin : RSTA_BUSY_WITH_REG - always @(*) ram_rstreg_a_busy = RSTA_I_SAFE | ENA_dly_reg | ENA_dly_reg_D; - always @(posedge clka) RSTA_BUSY <= #FLOP_DELAY ram_rstreg_a_busy; - end - endgenerate - - generate - if ( (C_MEM_TYPE == 0 || C_MEM_TYPE == 3) && C_EN_SAFETY_CKT == 1) begin : SPRAM_RST_BUSY - always @(*) RSTB_BUSY = 1'b0; - end - endgenerate - - generate - if ( (C_HAS_MEM_OUTPUT_REGS_B==0 || (C_HAS_MEM_OUTPUT_REGS_B==1 && C_RSTRAM_B==1)) && (C_MEM_TYPE != 0 && C_MEM_TYPE != 3) && C_EN_SAFETY_CKT == 1) begin : RSTB_BUSY_NO_REG - always @(*) ram_rstram_b_busy = RSTB_I_SAFE | ENB_dly | ENB_dly_D; - always @(posedge clkb) RSTB_BUSY <= #FLOP_DELAY ram_rstram_b_busy; - end - endgenerate - - generate - if (C_HAS_MEM_OUTPUT_REGS_B==1 && C_RSTRAM_B==0 && C_MEM_TYPE != 0 && C_MEM_TYPE != 3 && C_EN_SAFETY_CKT == 1) begin : RSTB_BUSY_WITH_REG - always @(*) ram_rstreg_b_busy = RSTB_I_SAFE | ENB_dly_reg | ENB_dly_reg_D; - always @(posedge clkb) RSTB_BUSY <= #FLOP_DELAY ram_rstreg_b_busy; - end - endgenerate - - //----------------------------------------------------------------------------- - // -- ENA/ENB Generation - //----------------------------------------------------------------------------- - - generate - if ((C_HAS_MEM_OUTPUT_REGS_A==0 || (C_HAS_MEM_OUTPUT_REGS_A==1 && C_RSTRAM_A==1)) && C_EN_SAFETY_CKT == 1) begin : ENA_NO_REG - always @(posedge clka) begin - ENA_dly <= #FLOP_DELAY RSTA_I_SAFE; - ENA_dly_D <= #FLOP_DELAY ENA_dly; - end - assign ENA_I_SAFE = (C_HAS_ENA == 0)? 1'b1 : (ENA_dly_D | ena_in); - end - endgenerate - - generate - if ( (C_HAS_MEM_OUTPUT_REGS_A==1 && C_RSTRAM_A==0) && C_EN_SAFETY_CKT == 1) begin : ENA_WITH_REG - always @(posedge clka) begin - ENA_dly_reg <= #FLOP_DELAY RSTA_I_SAFE; - ENA_dly_reg_D <= #FLOP_DELAY ENA_dly_reg; - end - assign ENA_I_SAFE = (C_HAS_ENA == 0)? 1'b1 : (ENA_dly_reg_D | ena_in); - end - endgenerate - - generate - if (C_MEM_TYPE == 0 || C_MEM_TYPE == 3) begin : SPRAM_ENB - assign ENB_I_SAFE = 1'b0; - end - endgenerate - - generate - if ((C_HAS_MEM_OUTPUT_REGS_B==0 || (C_HAS_MEM_OUTPUT_REGS_B==1 && C_RSTRAM_B==1)) && C_MEM_TYPE != 0 && C_MEM_TYPE != 3 && C_EN_SAFETY_CKT == 1) begin : ENB_NO_REG - always @(posedge clkb) begin : PROC_ENB_GEN - ENB_dly <= #FLOP_DELAY RSTB_I_SAFE; - ENB_dly_D <= #FLOP_DELAY ENB_dly; - end - assign ENB_I_SAFE = (C_HAS_ENB == 0)? 1'b1 : (ENB_dly_D | ENB); - end - endgenerate - - generate - if (C_HAS_MEM_OUTPUT_REGS_B==1 && C_RSTRAM_B==0 && C_MEM_TYPE != 0 && C_MEM_TYPE != 3 && C_EN_SAFETY_CKT == 1)begin : ENB_WITH_REG - always @(posedge clkb) begin : PROC_ENB_GEN - ENB_dly_reg <= #FLOP_DELAY RSTB_I_SAFE; - ENB_dly_reg_D <= #FLOP_DELAY ENB_dly_reg; - end - assign ENB_I_SAFE = (C_HAS_ENB == 0)? 1'b1 : (ENB_dly_reg_D | ENB); - end - endgenerate - - generate if ((C_INTERFACE_TYPE == 0) && (C_ENABLE_32BIT_ADDRESS == 0)) begin : native_mem_module -blk_mem_gen_v8_4_4_mem_module - #(.C_CORENAME (C_CORENAME), - .C_FAMILY (C_FAMILY), - .C_XDEVICEFAMILY (C_XDEVICEFAMILY), - .C_MEM_TYPE (C_MEM_TYPE), - .C_BYTE_SIZE (C_BYTE_SIZE), - .C_ALGORITHM (C_ALGORITHM), - .C_USE_BRAM_BLOCK (C_USE_BRAM_BLOCK), - .C_PRIM_TYPE (C_PRIM_TYPE), - .C_LOAD_INIT_FILE (C_LOAD_INIT_FILE), - .C_INIT_FILE_NAME (C_INIT_FILE_NAME), - .C_INIT_FILE (C_INIT_FILE), - .C_USE_DEFAULT_DATA (C_USE_DEFAULT_DATA), - .C_DEFAULT_DATA (C_DEFAULT_DATA), - .C_RST_TYPE ("SYNC"), - .C_HAS_RSTA (C_HAS_RSTA), - .C_RST_PRIORITY_A (C_RST_PRIORITY_A), - .C_RSTRAM_A (C_RSTRAM_A), - .C_INITA_VAL (C_INITA_VAL), - .C_HAS_ENA (C_HAS_ENA), - .C_HAS_REGCEA (C_HAS_REGCEA), - .C_USE_BYTE_WEA (C_USE_BYTE_WEA), - .C_WEA_WIDTH (C_WEA_WIDTH), - .C_WRITE_MODE_A (C_WRITE_MODE_A), - .C_WRITE_WIDTH_A (C_WRITE_WIDTH_A), - .C_READ_WIDTH_A (C_READ_WIDTH_A), - .C_WRITE_DEPTH_A (C_WRITE_DEPTH_A), - .C_READ_DEPTH_A (C_READ_DEPTH_A), - .C_ADDRA_WIDTH (C_ADDRA_WIDTH), - .C_HAS_RSTB (C_HAS_RSTB), - .C_RST_PRIORITY_B (C_RST_PRIORITY_B), - .C_RSTRAM_B (C_RSTRAM_B), - .C_INITB_VAL (C_INITB_VAL), - .C_HAS_ENB (C_HAS_ENB), - .C_HAS_REGCEB (C_HAS_REGCEB), - .C_USE_BYTE_WEB (C_USE_BYTE_WEB), - .C_WEB_WIDTH (C_WEB_WIDTH), - .C_WRITE_MODE_B (C_WRITE_MODE_B), - .C_WRITE_WIDTH_B (C_WRITE_WIDTH_B), - .C_READ_WIDTH_B (C_READ_WIDTH_B), - .C_WRITE_DEPTH_B (C_WRITE_DEPTH_B), - .C_READ_DEPTH_B (C_READ_DEPTH_B), - .C_ADDRB_WIDTH (C_ADDRB_WIDTH), - .C_HAS_MEM_OUTPUT_REGS_A (C_HAS_MEM_OUTPUT_REGS_A), - .C_HAS_MEM_OUTPUT_REGS_B (C_HAS_MEM_OUTPUT_REGS_B), - .C_HAS_MUX_OUTPUT_REGS_A (C_HAS_MUX_OUTPUT_REGS_A), - .C_HAS_MUX_OUTPUT_REGS_B (C_HAS_MUX_OUTPUT_REGS_B), - .C_HAS_SOFTECC_INPUT_REGS_A (C_HAS_SOFTECC_INPUT_REGS_A), - .C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B), - .C_MUX_PIPELINE_STAGES (C_MUX_PIPELINE_STAGES), - .C_USE_SOFTECC (C_USE_SOFTECC), - .C_USE_ECC (C_USE_ECC), - .C_HAS_INJECTERR (C_HAS_INJECTERR), - .C_SIM_COLLISION_CHECK (C_SIM_COLLISION_CHECK), - .C_COMMON_CLK (C_COMMON_CLK), - .FLOP_DELAY (FLOP_DELAY), - .C_DISABLE_WARN_BHV_COLL (C_DISABLE_WARN_BHV_COLL), - .C_EN_ECC_PIPE (C_EN_ECC_PIPE), - .C_DISABLE_WARN_BHV_RANGE (C_DISABLE_WARN_BHV_RANGE)) - blk_mem_gen_v8_4_4_inst - (.CLKA (CLKA), - .RSTA (RSTA_I_SAFE),//(rsta_in), - .ENA (ENA_I_SAFE),//(ena_in), - .REGCEA (regcea_in), - .WEA (wea_in), - .ADDRA (addra_in), - .DINA (dina_in), - .DOUTA (DOUTA), - .CLKB (CLKB), - .RSTB (RSTB_I_SAFE),//(RSTB), - .ENB (ENB_I_SAFE),//(ENB), - .REGCEB (REGCEB), - .WEB (WEB), - .ADDRB (ADDRB), - .DINB (DINB), - .DOUTB (DOUTB), - .INJECTSBITERR (injectsbiterr_in), - .INJECTDBITERR (injectdbiterr_in), - .ECCPIPECE (ECCPIPECE), - .SLEEP (SLEEP), - .SBITERR (SBITERR), - .DBITERR (DBITERR), - .RDADDRECC (RDADDRECC) - ); - end - endgenerate - - generate if((C_INTERFACE_TYPE == 0) && (C_ENABLE_32BIT_ADDRESS == 1)) begin : native_mem_mapped_module - - localparam C_ADDRA_WIDTH_ACTUAL = log2roundup(C_WRITE_DEPTH_A); - localparam C_ADDRB_WIDTH_ACTUAL = log2roundup(C_WRITE_DEPTH_B); - - localparam C_ADDRA_WIDTH_MSB = C_ADDRA_WIDTH_ACTUAL+log2int(C_WRITE_WIDTH_A/8); - localparam C_ADDRB_WIDTH_MSB = C_ADDRB_WIDTH_ACTUAL+log2int(C_WRITE_WIDTH_B/8); - // localparam C_ADDRA_WIDTH_MSB = C_ADDRA_WIDTH_ACTUAL+log2roundup(C_WRITE_WIDTH_A/8); - // localparam C_ADDRB_WIDTH_MSB = C_ADDRB_WIDTH_ACTUAL+log2roundup(C_WRITE_WIDTH_B/8); - localparam C_MEM_MAP_ADDRA_WIDTH_MSB = C_ADDRA_WIDTH_MSB; - localparam C_MEM_MAP_ADDRB_WIDTH_MSB = C_ADDRB_WIDTH_MSB; - - // Data Width Number of LSB address bits to be discarded - // 1 to 16 1 - // 17 to 32 2 - // 33 to 64 3 - // 65 to 128 4 - // 129 to 256 5 - // 257 to 512 6 - // 513 to 1024 7 - // The following two constants determine this. - - localparam MEM_MAP_LOWER_BOUND_VAL_A = (log2int(divroundup(C_WRITE_WIDTH_A,8)==0)) ? 0:(log2int(divroundup(C_WRITE_WIDTH_A,8))); - localparam MEM_MAP_LOWER_BOUND_VAL_B = (log2int(divroundup(C_WRITE_WIDTH_B,8)==0)) ? 0:(log2int(divroundup(C_WRITE_WIDTH_B,8))); - localparam C_MEM_MAP_ADDRA_WIDTH_LSB = MEM_MAP_LOWER_BOUND_VAL_A; - localparam C_MEM_MAP_ADDRB_WIDTH_LSB = MEM_MAP_LOWER_BOUND_VAL_B; - - wire [C_ADDRB_WIDTH_ACTUAL-1 :0] rdaddrecc_i; - wire [C_ADDRB_WIDTH-1:C_MEM_MAP_ADDRB_WIDTH_MSB] msb_zero_i; - wire [C_MEM_MAP_ADDRB_WIDTH_LSB-1:0] lsb_zero_i; - - assign msb_zero_i = 0; - assign lsb_zero_i = 0; - assign RDADDRECC = {msb_zero_i,rdaddrecc_i,lsb_zero_i}; - -blk_mem_gen_v8_4_4_mem_module - #(.C_CORENAME (C_CORENAME), - .C_FAMILY (C_FAMILY), - .C_XDEVICEFAMILY (C_XDEVICEFAMILY), - .C_MEM_TYPE (C_MEM_TYPE), - .C_BYTE_SIZE (C_BYTE_SIZE), - .C_USE_BRAM_BLOCK (C_USE_BRAM_BLOCK), - .C_ALGORITHM (C_ALGORITHM), - .C_PRIM_TYPE (C_PRIM_TYPE), - .C_LOAD_INIT_FILE (C_LOAD_INIT_FILE), - .C_INIT_FILE_NAME (C_INIT_FILE_NAME), - .C_INIT_FILE (C_INIT_FILE), - .C_USE_DEFAULT_DATA (C_USE_DEFAULT_DATA), - .C_DEFAULT_DATA (C_DEFAULT_DATA), - .C_RST_TYPE ("SYNC"), - .C_HAS_RSTA (C_HAS_RSTA), - .C_RST_PRIORITY_A (C_RST_PRIORITY_A), - .C_RSTRAM_A (C_RSTRAM_A), - .C_INITA_VAL (C_INITA_VAL), - .C_HAS_ENA (C_HAS_ENA), - .C_HAS_REGCEA (C_HAS_REGCEA), - .C_USE_BYTE_WEA (C_USE_BYTE_WEA), - .C_WEA_WIDTH (C_WEA_WIDTH), - .C_WRITE_MODE_A (C_WRITE_MODE_A), - .C_WRITE_WIDTH_A (C_WRITE_WIDTH_A), - .C_READ_WIDTH_A (C_READ_WIDTH_A), - .C_WRITE_DEPTH_A (C_WRITE_DEPTH_A), - .C_READ_DEPTH_A (C_READ_DEPTH_A), - .C_ADDRA_WIDTH (C_ADDRA_WIDTH_ACTUAL), - .C_HAS_RSTB (C_HAS_RSTB), - .C_RST_PRIORITY_B (C_RST_PRIORITY_B), - .C_RSTRAM_B (C_RSTRAM_B), - .C_INITB_VAL (C_INITB_VAL), - .C_HAS_ENB (C_HAS_ENB), - .C_HAS_REGCEB (C_HAS_REGCEB), - .C_USE_BYTE_WEB (C_USE_BYTE_WEB), - .C_WEB_WIDTH (C_WEB_WIDTH), - .C_WRITE_MODE_B (C_WRITE_MODE_B), - .C_WRITE_WIDTH_B (C_WRITE_WIDTH_B), - .C_READ_WIDTH_B (C_READ_WIDTH_B), - .C_WRITE_DEPTH_B (C_WRITE_DEPTH_B), - .C_READ_DEPTH_B (C_READ_DEPTH_B), - .C_ADDRB_WIDTH (C_ADDRB_WIDTH_ACTUAL), - .C_HAS_MEM_OUTPUT_REGS_A (C_HAS_MEM_OUTPUT_REGS_A), - .C_HAS_MEM_OUTPUT_REGS_B (C_HAS_MEM_OUTPUT_REGS_B), - .C_HAS_MUX_OUTPUT_REGS_A (C_HAS_MUX_OUTPUT_REGS_A), - .C_HAS_MUX_OUTPUT_REGS_B (C_HAS_MUX_OUTPUT_REGS_B), - .C_HAS_SOFTECC_INPUT_REGS_A (C_HAS_SOFTECC_INPUT_REGS_A), - .C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B), - .C_MUX_PIPELINE_STAGES (C_MUX_PIPELINE_STAGES), - .C_USE_SOFTECC (C_USE_SOFTECC), - .C_USE_ECC (C_USE_ECC), - .C_HAS_INJECTERR (C_HAS_INJECTERR), - .C_SIM_COLLISION_CHECK (C_SIM_COLLISION_CHECK), - .C_COMMON_CLK (C_COMMON_CLK), - .FLOP_DELAY (FLOP_DELAY), - .C_DISABLE_WARN_BHV_COLL (C_DISABLE_WARN_BHV_COLL), - .C_EN_ECC_PIPE (C_EN_ECC_PIPE), - .C_DISABLE_WARN_BHV_RANGE (C_DISABLE_WARN_BHV_RANGE)) - blk_mem_gen_v8_4_4_inst - (.CLKA (CLKA), - .RSTA (RSTA_I_SAFE),//(rsta_in), - .ENA (ENA_I_SAFE),//(ena_in), - .REGCEA (regcea_in), - .WEA (wea_in), - .ADDRA (addra_in[C_MEM_MAP_ADDRA_WIDTH_MSB-1:C_MEM_MAP_ADDRA_WIDTH_LSB]), - .DINA (dina_in), - .DOUTA (DOUTA), - .CLKB (CLKB), - .RSTB (RSTB_I_SAFE),//(RSTB), - .ENB (ENB_I_SAFE),//(ENB), - .REGCEB (REGCEB), - .WEB (WEB), - .ADDRB (ADDRB[C_MEM_MAP_ADDRB_WIDTH_MSB-1:C_MEM_MAP_ADDRB_WIDTH_LSB]), - .DINB (DINB), - .DOUTB (DOUTB), - .INJECTSBITERR (injectsbiterr_in), - .INJECTDBITERR (injectdbiterr_in), - .ECCPIPECE (ECCPIPECE), - .SLEEP (SLEEP), - .SBITERR (SBITERR), - .DBITERR (DBITERR), - .RDADDRECC (rdaddrecc_i) - ); - end - endgenerate - - generate if (C_HAS_MEM_OUTPUT_REGS_B == 0 && C_HAS_MUX_OUTPUT_REGS_B == 0 ) begin : no_regs - assign S_AXI_RDATA = s_axi_rdata_c; - assign S_AXI_RLAST = s_axi_rlast_c; - assign S_AXI_RVALID = s_axi_rvalid_c; - assign S_AXI_RID = s_axi_rid_c; - assign S_AXI_RRESP = s_axi_rresp_c; - assign s_axi_rready_c = S_AXI_RREADY; - end - endgenerate - - generate if (C_HAS_MEM_OUTPUT_REGS_B == 1) begin : has_regceb - assign regceb_c = s_axi_rvalid_c && s_axi_rready_c; - end - endgenerate - - generate if (C_HAS_MEM_OUTPUT_REGS_B == 0) begin : no_regceb - assign regceb_c = REGCEB; - end - endgenerate - - generate if (C_HAS_MUX_OUTPUT_REGS_B == 1) begin : only_core_op_regs - assign s_axi_payload_c = {s_axi_rid_c,s_axi_rdata_c,s_axi_rresp_c,s_axi_rlast_c}; - assign S_AXI_RID = m_axi_payload_c[C_AXI_PAYLOAD-1 : C_AXI_PAYLOAD-C_AXI_ID_WIDTH]; - assign S_AXI_RDATA = m_axi_payload_c[C_AXI_PAYLOAD-C_AXI_ID_WIDTH-1 : C_AXI_PAYLOAD-C_AXI_ID_WIDTH-C_WRITE_WIDTH_B]; - assign S_AXI_RRESP = m_axi_payload_c[2:1]; - assign S_AXI_RLAST = m_axi_payload_c[0]; - end - endgenerate - - generate if (C_HAS_MEM_OUTPUT_REGS_B == 1) begin : only_emb_op_regs - assign s_axi_payload_c = {s_axi_rid_c,s_axi_rresp_c,s_axi_rlast_c}; - assign S_AXI_RDATA = s_axi_rdata_c; - assign S_AXI_RID = m_axi_payload_c[C_AXI_PAYLOAD-1 : C_AXI_PAYLOAD-C_AXI_ID_WIDTH]; - assign S_AXI_RRESP = m_axi_payload_c[2:1]; - assign S_AXI_RLAST = m_axi_payload_c[0]; - end - endgenerate - - generate if (C_HAS_MUX_OUTPUT_REGS_B == 1 || C_HAS_MEM_OUTPUT_REGS_B == 1) begin : has_regs_fwd - - blk_mem_axi_regs_fwd_v8_4 - #(.C_DATA_WIDTH (C_AXI_PAYLOAD)) - axi_regs_inst ( - .ACLK (S_ACLK), - .ARESET (s_aresetn_a_c), - .S_VALID (s_axi_rvalid_c), - .S_READY (s_axi_rready_c), - .S_PAYLOAD_DATA (s_axi_payload_c), - .M_VALID (S_AXI_RVALID), - .M_READY (S_AXI_RREADY), - .M_PAYLOAD_DATA (m_axi_payload_c) - ); - end - endgenerate - - generate if (C_INTERFACE_TYPE == 1) begin : axi_mem_module - -assign s_aresetn_a_c = !S_ARESETN; -assign S_AXI_BRESP = 2'b00; -assign s_axi_rresp_c = 2'b00; -assign s_axi_arlen_c = (C_AXI_TYPE == 1)?S_AXI_ARLEN:8'h0; - - blk_mem_axi_write_wrapper_beh_v8_4 - #(.C_INTERFACE_TYPE (C_INTERFACE_TYPE), - .C_AXI_TYPE (C_AXI_TYPE), - .C_AXI_SLAVE_TYPE (C_AXI_SLAVE_TYPE), - .C_MEMORY_TYPE (C_MEM_TYPE), - .C_WRITE_DEPTH_A (C_WRITE_DEPTH_A), - .C_AXI_AWADDR_WIDTH ((AXI_FULL_MEMORY_SLAVE == 1)?C_AXI_ADDR_WIDTH:C_AXI_ADDR_WIDTH-C_AXI_ADDR_WIDTH_LSB), - .C_HAS_AXI_ID (C_HAS_AXI_ID), - .C_AXI_ID_WIDTH (C_AXI_ID_WIDTH), - .C_ADDRA_WIDTH (C_ADDRA_WIDTH), - .C_AXI_WDATA_WIDTH (C_WRITE_WIDTH_A), - .C_AXI_OS_WR (C_AXI_OS_WR)) - axi_wr_fsm ( - // AXI Global Signals - .S_ACLK (S_ACLK), - .S_ARESETN (s_aresetn_a_c), - // AXI Full/Lite Slave Write interface - .S_AXI_AWADDR (S_AXI_AWADDR[C_AXI_ADDR_WIDTH_MSB-1:C_AXI_ADDR_WIDTH_LSB]), - .S_AXI_AWLEN (S_AXI_AWLEN), - .S_AXI_AWID (S_AXI_AWID), - .S_AXI_AWSIZE (S_AXI_AWSIZE), - .S_AXI_AWBURST (S_AXI_AWBURST), - .S_AXI_AWVALID (S_AXI_AWVALID), - .S_AXI_AWREADY (S_AXI_AWREADY), - .S_AXI_WVALID (S_AXI_WVALID), - .S_AXI_WREADY (S_AXI_WREADY), - .S_AXI_BVALID (S_AXI_BVALID), - .S_AXI_BREADY (S_AXI_BREADY), - .S_AXI_BID (S_AXI_BID), - // Signals for BRAM interfac( - .S_AXI_AWADDR_OUT (s_axi_awaddr_out_c), - .S_AXI_WR_EN (s_axi_wr_en_c) - ); - - blk_mem_axi_read_wrapper_beh_v8_4 - #(.C_INTERFACE_TYPE (C_INTERFACE_TYPE), - .C_AXI_TYPE (C_AXI_TYPE), - .C_AXI_SLAVE_TYPE (C_AXI_SLAVE_TYPE), - .C_MEMORY_TYPE (C_MEM_TYPE), - .C_WRITE_WIDTH_A (C_WRITE_WIDTH_A), - .C_ADDRA_WIDTH (C_ADDRA_WIDTH), - .C_AXI_PIPELINE_STAGES (1), - .C_AXI_ARADDR_WIDTH ((AXI_FULL_MEMORY_SLAVE == 1)?C_AXI_ADDR_WIDTH:C_AXI_ADDR_WIDTH-C_AXI_ADDR_WIDTH_LSB), - .C_HAS_AXI_ID (C_HAS_AXI_ID), - .C_AXI_ID_WIDTH (C_AXI_ID_WIDTH), - .C_ADDRB_WIDTH (C_ADDRB_WIDTH)) - axi_rd_sm( - //AXI Global Signals - .S_ACLK (S_ACLK), - .S_ARESETN (s_aresetn_a_c), - //AXI Full/Lite Read Side - .S_AXI_ARADDR (S_AXI_ARADDR[C_AXI_ADDR_WIDTH_MSB-1:C_AXI_ADDR_WIDTH_LSB]), - .S_AXI_ARLEN (s_axi_arlen_c), - .S_AXI_ARSIZE (S_AXI_ARSIZE), - .S_AXI_ARBURST (S_AXI_ARBURST), - .S_AXI_ARVALID (S_AXI_ARVALID), - .S_AXI_ARREADY (S_AXI_ARREADY), - .S_AXI_RLAST (s_axi_rlast_c), - .S_AXI_RVALID (s_axi_rvalid_c), - .S_AXI_RREADY (s_axi_rready_c), - .S_AXI_ARID (S_AXI_ARID), - .S_AXI_RID (s_axi_rid_c), - //AXI Full/Lite Read FSM Outputs - .S_AXI_ARADDR_OUT (s_axi_araddr_out_c), - .S_AXI_RD_EN (s_axi_rd_en_c) - ); - -blk_mem_gen_v8_4_4_mem_module - #(.C_CORENAME (C_CORENAME), - .C_FAMILY (C_FAMILY), - .C_XDEVICEFAMILY (C_XDEVICEFAMILY), - .C_MEM_TYPE (C_MEM_TYPE), - .C_BYTE_SIZE (C_BYTE_SIZE), - .C_USE_BRAM_BLOCK (C_USE_BRAM_BLOCK), - .C_ALGORITHM (C_ALGORITHM), - .C_PRIM_TYPE (C_PRIM_TYPE), - .C_LOAD_INIT_FILE (C_LOAD_INIT_FILE), - .C_INIT_FILE_NAME (C_INIT_FILE_NAME), - .C_INIT_FILE (C_INIT_FILE), - .C_USE_DEFAULT_DATA (C_USE_DEFAULT_DATA), - .C_DEFAULT_DATA (C_DEFAULT_DATA), - .C_RST_TYPE ("SYNC"), - .C_HAS_RSTA (C_HAS_RSTA), - .C_RST_PRIORITY_A (C_RST_PRIORITY_A), - .C_RSTRAM_A (C_RSTRAM_A), - .C_INITA_VAL (C_INITA_VAL), - .C_HAS_ENA (1), - .C_HAS_REGCEA (C_HAS_REGCEA), - .C_USE_BYTE_WEA (1), - .C_WEA_WIDTH (C_WEA_WIDTH), - .C_WRITE_MODE_A (C_WRITE_MODE_A), - .C_WRITE_WIDTH_A (C_WRITE_WIDTH_A), - .C_READ_WIDTH_A (C_READ_WIDTH_A), - .C_WRITE_DEPTH_A (C_WRITE_DEPTH_A), - .C_READ_DEPTH_A (C_READ_DEPTH_A), - .C_ADDRA_WIDTH (C_ADDRA_WIDTH), - .C_HAS_RSTB (C_HAS_RSTB), - .C_RST_PRIORITY_B (C_RST_PRIORITY_B), - .C_RSTRAM_B (C_RSTRAM_B), - .C_INITB_VAL (C_INITB_VAL), - .C_HAS_ENB (1), - .C_HAS_REGCEB (C_HAS_MEM_OUTPUT_REGS_B), - .C_USE_BYTE_WEB (1), - .C_WEB_WIDTH (C_WEB_WIDTH), - .C_WRITE_MODE_B (C_WRITE_MODE_B), - .C_WRITE_WIDTH_B (C_WRITE_WIDTH_B), - .C_READ_WIDTH_B (C_READ_WIDTH_B), - .C_WRITE_DEPTH_B (C_WRITE_DEPTH_B), - .C_READ_DEPTH_B (C_READ_DEPTH_B), - .C_ADDRB_WIDTH (C_ADDRB_WIDTH), - .C_HAS_MEM_OUTPUT_REGS_A (0), - .C_HAS_MEM_OUTPUT_REGS_B (C_HAS_MEM_OUTPUT_REGS_B), - .C_HAS_MUX_OUTPUT_REGS_A (0), - .C_HAS_MUX_OUTPUT_REGS_B (0), - .C_HAS_SOFTECC_INPUT_REGS_A (C_HAS_SOFTECC_INPUT_REGS_A), - .C_HAS_SOFTECC_OUTPUT_REGS_B (C_HAS_SOFTECC_OUTPUT_REGS_B), - .C_MUX_PIPELINE_STAGES (C_MUX_PIPELINE_STAGES), - .C_USE_SOFTECC (C_USE_SOFTECC), - .C_USE_ECC (C_USE_ECC), - .C_HAS_INJECTERR (C_HAS_INJECTERR), - .C_SIM_COLLISION_CHECK (C_SIM_COLLISION_CHECK), - .C_COMMON_CLK (C_COMMON_CLK), - .FLOP_DELAY (FLOP_DELAY), - .C_DISABLE_WARN_BHV_COLL (C_DISABLE_WARN_BHV_COLL), - .C_EN_ECC_PIPE (0), - .C_DISABLE_WARN_BHV_RANGE (C_DISABLE_WARN_BHV_RANGE)) - blk_mem_gen_v8_4_4_inst - (.CLKA (S_ACLK), - .RSTA (s_aresetn_a_c), - .ENA (s_axi_wr_en_c), - .REGCEA (regcea_in), - .WEA (S_AXI_WSTRB), - .ADDRA (s_axi_awaddr_out_c), - .DINA (S_AXI_WDATA), - .DOUTA (DOUTA), - .CLKB (S_ACLK), - .RSTB (s_aresetn_a_c), - .ENB (s_axi_rd_en_c), - .REGCEB (regceb_c), - .WEB (WEB_parameterized), - .ADDRB (s_axi_araddr_out_c), - .DINB (DINB), - .DOUTB (s_axi_rdata_c), - .INJECTSBITERR (injectsbiterr_in), - .INJECTDBITERR (injectdbiterr_in), - .SBITERR (SBITERR), - .DBITERR (DBITERR), - .ECCPIPECE (1'b0), - .SLEEP (1'b0), - .RDADDRECC (RDADDRECC) - ); - end - endgenerate -endmodule - - - diff --git a/lacpu/rtl/xilinx_ip/data_sram_bank/summary.log b/lacpu/rtl/xilinx_ip/data_sram_bank/summary.log deleted file mode 100644 index f86e1f8..0000000 --- a/lacpu/rtl/xilinx_ip/data_sram_bank/summary.log +++ /dev/null @@ -1,20 +0,0 @@ - -User Configuration --------------------------------------------------------------------------------- -Algorithm : Minimum_Area -Memory Type : Single_Port_RAM -Port A Read Width : [32] -Port A Write Width : [32] -Memory Depth : [64] - ----------------------------------------------------------------------------------- - -Block RAM resource(s) (18K BRAMs) : [1] -Block RAM resource(s) (36K BRAMs) : [0] ----------------------------------------------------------------------------------- -Clock A Frequency : [100] -Port A Enable Rate : [100] -Port A Write Rate : [50] ----------------------------------------------------------------------------------- -Estimated Power for IP : 3.53845 mW ----------------------------------------------------------------------------------- diff --git a/lacpu/run_vivado/la32r/la32r.xpr b/lacpu/run_vivado/la32r/la32r.xpr index f147868..33ca51c 100644 --- a/lacpu/run_vivado/la32r/la32r.xpr +++ b/lacpu/run_vivado/la32r/la32r.xpr @@ -7,7 +7,7 @@