[Modified] Switch soc_top&board to axi&xc7a200t

lacpu/rtl/mycpu/mul_div_lock.v

@@ -0,0 +1,66 @@
+module mul_div_lock (
+    input         clk,
+    input         reset,
+    input  [ 5:0] stall,
+    input  [31:0] a,
+    input  [31:0] b,
+    input         mul_en, 
+    input         div_en,
+    input         stallreq_for_mul, 
+    input         stallreq_for_div,
+    
+    output [31:0] a_locked,
+    output [31:0] b_locked,
+    output        mul_en_locked,
+    output        div_en_locked
+);
+    reg        first_enable;
+    reg        mul_en_musk;
+    reg        div_en_musk;
+    reg [31:0] a_buffer;
+    reg [31:0] b_buffer;
+
+    wire stallreq = stallreq_for_mul | stallreq_for_div;
+
+    assign mul_en_locked = mul_en & mul_en_musk;
+    assign div_en_locked = div_en & div_en_musk;
+    
+    assign a_locked = first_enable ? a : a_buffer;
+    assign b_locked = first_enable ? b : b_buffer;
+
+    always @ (posedge clk) begin
+        if (reset) begin
+            a_buffer <= 0;
+            b_buffer <= 0;
+            mul_en_musk <= 1;
+            div_en_musk <= 1;
+
+            first_enable <= 1;
+        end
+        else if (mul_en & first_enable) begin
+            a_buffer <= a;
+            b_buffer <= b;
+            mul_en_musk <= 0;
+            div_en_musk <= 1;
+
+            first_enable <= 0;
+        end 
+        else if (div_en & first_enable) begin
+            a_buffer <= a;
+            b_buffer <= b;
+            mul_en_musk <= 1;
+            div_en_musk <= 0;
+
+            first_enable <= 0;
+        end
+        else if (!stallreq & (mul_en|div_en) & !first_enable & !stall[2]) begin
+            a_buffer <= 0;
+            b_buffer <= 0;
+            mul_en_musk <= 1;
+            div_en_musk <= 1;
+
+            first_enable <= 1;
+        end
+
+    end
+endmodule